Topological effects on string vacua
Extracted source text ยท arXiv 1101.4406
%%
%% This is file `template-6s.tex',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% template.raw (with options: `6s')
%%
%% Template for the LaTeX class aipproc.
%%
%% (C) 1998,2000,2001 American Institute of Physics and Frank Mittelbach
%% All rights reserved
%%
%%
%% $Id: template.raw,v 1.12 2005/07/06 19:22:14 frank Exp $
%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Please remove the next line of code if you
%% are satisfied that your installation is
%% complete and working.
%%
%% It is only there to help you in detecting
%% potential problems.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\input{aipcheck}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% SELECT THE LAYOUT
%%
%% The class supports further options.
%% See aipguide.pdf for details.
%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\documentclass[
,final % use final for the camera ready runs
%% ,draft % use draft while you are working on the paper
%% ,numberedheadings % uncomment this option for numbered sections
%% , % add further options here if necessary
]
{aipproc}
\layoutstyle{6x9}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% FRONTMATTER
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
\title{Topological effects on string vacua}
\classification{11.25.-w}
\keywords {String theory, string compactificaction, fluxes}
\author{Oscar Loaiza-Brito}{
address={Departamento de F\'isica, Divisi\'on de Ciencias e Ingenier\'ias, Campus Le\'on, Universidad de Guanajuato, P.O. Box E-143, Le\'on, Guanajuato, M\'exico}
}
\begin{abstract}
We review some topological effects on the construction of string flux-vacua. Specifically we study the effects of brane-flux transitions on the stability of D-branes on a generalized tori compactificaction, the transition that a black hole suffers in a background threaded with fluxes and the connections among some Minkowsky vacua solutions.
\end{abstract}
\maketitle
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% MAINMATTER
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Introduction}
During the last decade, flux string compactifications have become an important setup on the construction of realistic string vacua \cite{Grana:2005jc}. The main reason for that lies on the possibility to construct a superpotential depending on the compactificaction moduli which in turn yields their stabilization. However, the presence of such fluxes impose some stringent constraints on the models involving wrapping D-branes on internal cycles. An important consequence is the realization of a topological transition between a brane configuration into one involving fluxes.
Wrapping a D-brane on a submanifold supporting NS-NS flux flux makes the D-brane, Freed-Witten (FW) anomalous \cite{Freed:1999vc}. This anomaly in the corresponding string worldsheet, can be understood in the following way.
Consider a $D(p+2)$-brane wrapping a submanifold ${\cal W}_{p+3}$. If there exists a NS-NS 3-form $H_3$ with its three legs on the worldvolume of the $D$-brane (a non-vanishing pullback of $H_3$ on ${\cal W}_{p+3}$), a monopole charge is induced through the action term $\int_{\cal W} A_{p}\wedge H_3$, where $A_{p}$ is the dual gauge potential on ${\cal W}_{p+3}$. The corresponding equations of motion are not fulfilled unless the source for the magnetic charge is added. This is accomplished by considering an extra $D$-brane ending at the worldvolume of the FW-anomalous brane. Altogether, the system is well defined and consistent.
Hence, in the presence of NS-NS flux, $D$-branes cannot wrap any submanifold. A consistent brane configuration should involve a net of submanifolds on which branes of different dimensions are wrapped. Specifically, if a $D(p+2)$-brane wraps a submanifold ${\cal W}_{p+3}$ on which the pullback of $H_3$ is different from zero, an extra $Dp$-brane wrapping a $(p-1)$-submanifold of ${\cal W}_{p+3}$ and extending on one coordinate on the transversal space to ${\cal W}_{p+3}$ is required. Being the submanifolds adequate to define spinors and their coupling with gauge fields, this configuration guarantees the absence of inconsistencies.
There are however, D-branes which in spite of being FW anomaly-free, are nevertheless unstable. This is physically interpreted as a topological transformation between D-branes and fluxes through the appearance of instantonic branes \cite{Maldacena:2001xj}. Formally, the transition is described by the Atiyah-Hirzebruch Spectral Sequence which roughly speaking, connects cohomology with twisted K-theory. A more pedestrian way to visualize the transition requires a coordinate rotation in which the extra brane added to cancel the FW anomaly intersects the anomalous brane in a timelike coordinate. Hence, an apparent stable D-brane in a background threaded with NS-NS flux, moves in time an encounters an instantonic brane. The encounter makes the smaller brane unstable to decay into a configuration of fluxes consisting on the coupling between the NS-NS flux and the magnetic field strength of the instantonic brane.
\section{Freed-Witten anomaly in generalized tori compactifications}
A six-dimensional torus threaded with NS-NS flux $H_{abc}$ is mapped under T-duality (on coordinate $x^a$) into a "twisted torus" which is a nilpotent manifold with a structure constant $f_{bc}^a$. The twisted torus is the quotient space constructed by the relations $(x^a, x^b, x^c, ...)\sim (x^a+1, x^b, x^c,...)\sim (x^a, x^b+1, x^c, ...)\sim (x^a +f^a_{bc}x^b, x^c+1, ...)$ in which there is not NS-NS flux \cite{Wecht:2007wu}. In this sense, all the effects of having a NS-NS background flux are mapped into effects produced by the new geometry represented by $f^a_{bc}$ which is an integer number referred to as {\it metric flux}.
In particular,
a D-brane wrapping a cycle which ends at an instantonic brane supporting some NS-NS flux, is mapped under T-duality into a D-brane wrapping a torsion cycle in the twisted torus \cite{Marchesano:2006ns}.
According to the physical interpretation given by MMS, this means that $N$ D$p$-branes wrapping a torsion cycle will decay into fluxes by encountering an instantonic D$p$-brane wrapped in a spatial $(p+1)$-cycle supporting the metric fluxes. The remnant fluxes are given by the coupling between metric fluxes and the magnetic field strength related to the instantonic brane \cite{LoaizaBrito:2006se}. This allows D$p$-branes to transform into $f^a_{bc}F_{a\mu_1\dots \mu_{3-p}}$.
However, under the above T-duality map, the toroidal K\"ahler closed form $J$ ($dJ=0$) is mapped into a non-closed form ($dJ\neq 0$). Hence by turning on an extra complex flux, composed by the NS-flux and the non-closed K\"ahler form, one can see that the flux
$(H_3+f J)$, is the source of instabilities for some D-branes wrapping internal cycles in the twisted torus.
The corresponding physical interpretation is as follows. Some D-branes\footnote{Those representing trivial cocycles under the map $\overline{d}_3= (H_3+fJ)\wedge$} would decay into a configuration of fluxes by encountering an instantonic D$(p+2)$-brane wrapped in a cycle which in turn supports the complex flux $H_3+f J$. The remnant is the coupling between the complex three-form and the magnetic field strength for the instantonic brane. Hence some D$p$-branes, would transform\footnote{If the transition is energetically favorable.} topologically into $(H_3+f J)\wedge\ast F_{p+4}$.
Interesting enough, one can see that in some cases, as for three-cycles in the above simple twisted torus, we can construct
a chain of instantonic branes in which the flux $\omega \ast F_{p+2}$ transforms into $(H_3+\omega J)\wedge\ast F_{p+4}$, relating NS-NS fluxes with RR ones and vice versa. An explicit example \cite{LoaizaBrito:2006se} shows that for a type IIA compactification on a twisted six-torus threaded by a metric flux in coordinates 456 and a NS-flux compatible with supersymmetric conditions, there are only 6 cycles out of 16, where a space-filling D6-brane can be wrapped.
Moreover, by studying the case of the twisted six-torus orbifolded by ${Z}_2\times {Z}_2$, one finds that all D6-branes wrapping the invariant (untwisted) cycles, are either unstable to decay into fluxes or Freed-Witten anomalous. In cases like these, phenomenological models are not protected against instabilities unless $H_3+f J=0$. It is important to say that we have considered only forms and cycles invariant under the action of the above discrete group. It would be interesting to extend this study to $Z_2$-twisted forms as well.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Sample figure:
%%
%% The option [height=...] scales the picture to the given height,
%% without it it would be printed at its nominal size
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\begin{figure}
% \includegraphics[height=.3\textheight]{golfer}
% \caption{Picture to fixed height}
%\end{figure}
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% SAMPLE TABLE
%%
%% Shows the use of \tablehead and \tablenote
%% macros
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Black Holes and fluxes}
A four-dimensional black hole in ${\cal N}=2$ supersymmetric background can be constructed by wrapping several D3-branes on internal 3-cycles. The magnetic and electric charges carried by the black hole are those carried by the D3-branes under the potential Ramond-Ramond (RR) 4-form $C_4$ \cite{Suzuki:1995rt}.
In a flux compactification, the underlying geometry backreacts due to the fact that the fluxes gravitate and it is no so clear weather a black hole solution consisting on wrapping D3-branes would be possible. In \cite{Danielsson:2006jg} the authors study how the supersymmetric vacua solutions in the presence of fluxes are altered by the black hole, concluding that in a generic description, they are not.
In \cite{LoaizaBrito:2007kz}
it was shown that, under the presence of the non trivial NS-NS three-form flux~$H_3$ in the internal space, the four dimensional black hole described by D3-branes may disappear via the topological process that transforms branes into fluxes.
%
A NS-NS flux induces the FW anomaly on an instantonic D5-brane which must be canceled by a D3-brane ending on it.
%
Applying this fact to the system of the D3-branes wrapped on an internal Calabi-Yau cycle under the presence of extra NS-NS flux~$H_3$, one sees that the four-dimensional black hole would suffer from the same topological transition.
Under the four-dimensional perspective, the black hole would disappear leaving as a remnant a RR three-form flux~$F_3$ localized in the uncompactified four spacetime dimensions.
In order to compute the black hole quantities, it is assumed that the black hole represents a BPS state even in the presence of the NS-NS flux~$H_3$, namely, that there is not interplay between the effective scalar potential induced by the presence of the fluxes and the extremal black hole except for the transition drived by the instantonic brane. This means
that the BPS states in the usual ${\cal N}=2$ four-dimensional supergravity are preserved in the ${\cal N}=2$ gauged supergravity.
%
The charge (and mass) carried by the black hole before the topological transition driven by the instantonic D5-brane is afterwards carried by the coupling between the NS-NS flux $H_3$ and another RR three-form flux $F_3$ emanating from the D5-brane, implying that even the extremal black hole suffers from the transition that exchanges topologically different configurations which carry the same charge and mass.
%Of course there remains a possibility that our assumption of the BPS-ness is invalid and the NS-NS flux~$H_3$ does break supersymmetry.
Recently, it has been conjectured that an ensemble of the different solutions without horizon corresponds to a black hole~\cite{Mathur:2005zp}.
According to it, the horizon radius is nothing but the size of the region where the solutions in the ensemble differs each other.
%
%This might be the case for the final configurations. Interesting enough, the wormhole solution is found in~\cite{Rahaman:2006qm} with which the integration of~$F_3$ over a three-cycle can be finite and equal to the charge of the disappeared black hole.
%One example of this behavior was studied in~\cite{Loaiza-Brito:2001ux} for the D7-brane in type I superstring theory.
%
There are many open questions.
First of all, the already mentioned topological transformation was explored some years ago in the context of the conifold approximation~\cite{Greene:1995hu}.
In this scheme, the moduli space describing the geometry of the conifold on which a D3-brane is wrapped changes after a topological transformation under which the three-cycle of the confiold shrinks to zero and blow up into a two-cycle. Particularly, the complex structure moduli were exchanged into the K\"ahler moduli. It would be very interesting to go further and study what happens with the Calabi-Yau moduli under the presence of an instantonic brane.
\section{Minkowski vacua transitions}
Canceling the FW anomaly by the addition of extra branes makes the superpotential $\cal{W}$
to be non-invariant, implying the presence of connections between different Minkowski vacuum solutions from F-flat conditions. Although brane-flux transitions leave the tadpole condition invariant they perform a change in $\cal{W}$ which depends on RR fluxes. This essentially follows from the fact that there is a remnant of one unit of RR flux attributed to the instantonic brane. By considering the S-dual case as well, brane-flux transition is driven also by instantonic NS5-branes.\\
Vacuum solutions of type IIB flux compactifications on a factorizable six-dimensional torus in a simple orientifold plane, can be written in terms of polynomials $P_1$ and $P_2$ which share a common factor $P$. All polynomials depend on the complex structure $U=i\rho$ and on the units of RR and NS-NS flux. Before the transition, complex structure $\rho$ is stabilized at the commun root $\rho_0$ of $P(\rho)$, and the dilaton $S(\rho)$ fulfills the equation $P_1'(\rho)-SP_2'(\rho)=0$. After the transition there are three general cases \cite{HerreraSuarez:2009ne}:
1. $P_1(\rho)=P(\rho)Q_1(\rho)\rightarrow \hat{P}_1(\rho)=P(\rho)\hat{Q}_1(\tilde{f}_1\rho+\tilde{g}_1)$, where $\tilde{f}$ and $\tilde{g}$ are functions of the modified RR fluxes. The complex structure is invariant (there is still a common root between $P_2$ and $\hat{P}_1$), but the value at which the dilaton is stabilized suffers a change. The prototypical example for this case takes a transformation on $P_1(\rho)$ to $\kappa P_1(\rho)$ from which one gets that the complex structure is stabilized at the same value $\rho_0$. However, from the F-flat equation $\partial_\rho{\cal{W}}_H=0$ we get that the dilaton $S$ must fullfill the equation
$\kappa P_1'(\rho)- S P_2'(\rho)=0$,
which is true for $S=\kappa \rho_0$.
2. The transition changes the polynomial such that there is non-common factor $P(\rho)$. The new polynomial reads $\hat{P}_1(\rho)=\hat{P}(\rho)\hat{Q}_1(\rho)$ with $\hat{P}(\rho) =0$ at $\rho=\rho_*(\neq \rho_0)$. Hence, at $\rho=\rho_\ast$ and at $\rho=\rho_0$, ${\cal{W}}_H\neq 0$ from which we see that supersymmetry is broken through all moduli. At both points, the scalar potential is positive (since the model is no-scale) but an extended and more detailed analysis is required to elucidate if the scalar potential is minimum. In the case in which the scalar potential is not minimum at those points, we can say that brane-flux transitions connect the supersymmetric configuration into some unstable excitations around the basis point.
3. By considering transitions mediated by NS5-branes,
we find an example in which the transition changes the polynomial $P_1(\rho)$ and $P_2(\rho)$ such that there is still a common root since they share a common factor. However, this common factor $Q(\rho)$ has also changed with respect to $P(\rho)$ gathered from the original set of fluxes. The new polynomials are $P_1(\rho)= Q(\rho)(\tilde{f}_1\rho +\tilde{g}_1)$ and $P_2(\rho)=Q(\rho)(\tilde{f}_2\rho + \tilde{g}_2)$ with $Q(\rho_\ast)=0$ and $\rho_\ast\neq\rho_0$. In this case, the transition connects two different supersymmetric solutions which differ not only by a rescaling of fluxes. Therefore, the nucleation of instantonic NS5-branes
allows us to connect many different vacuum solutions which otherwise would be disconnected. The S-dual version of the brane-flux transition must notably reduce the size of vacuum solutions.\\
These results do not involve the presence of non-geometric fluxes. Their incorporation establishes novel ways to increase the value of RR and NS-NS fluxes. For
simple factorizable torus compactifications, the following is observed:
1. For the cases in which the solution to SUSY equations allows a non vanishing complex structure $U$ with $Re(U)>0$, the configuration of fluxes does not satisfy the required constraints for the transition to happen. This mean that brane-flux transition is forbidden for these cases, isolating the vacuum solution to connect to others. Notice that these solutions are interesting from the phenomenology point of view and are protected to move to another vacuum via an instantonic brane mediation.
2. For the cases in which one gets a pure imaginary complex structure $U$, the set of fluxes satisfy the constraints which allow the transition to occur. Different vacuum solutions, all of them sharing the property that $Re(U)=0$, are connected through a chain of instantonic branes.\\
It is important to remark that such results are obtained under the supergravity limit, which might be not valid for degenerated torus as in our examples where $Re(U)=0$.
It is also clear that a deeper study on different vacuum solutions is required.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% BACKMATTER
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{theacknowledgments}
I thank the organizers for inviting me to give a talk, specially to A. G\"uijosa and E. C\'aceres for kind support. The work was partially supported by Conacyt under the project No. 60209.
\end{theacknowledgments}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% The bibliography can be prepared using the BibTeX program or
%% manually.
%%
%% The code below assumes that BibTeX is used. If the bibliography is
%% produced without BibTeX comment out the following lines and see the
%% aipguide.pdf for further information.
%%
%% For your convenience a manually coded example is appended
%% after the \end{document}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% You may have to change the BibTeX style below, depending on your
%% setup or preferences.
%%
%%
%% For The AIP proceedings layouts use either
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\bibliographystyle{aipproc} % if natbib is available
%\bibliographystyle{aipprocl} % if natbib is missing
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% You probably want to use your own bibtex database here
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\bibliography{sample}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Just a reminder that you may have to run bibtex
%% All of it up to \end{document} can be removed
%% if you don't like the warning.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\IfFileExists{\jobname.bbl}{}
{\typeout{}
\typeout{******************************************}
\typeout{** Please run "bibtex \jobname" to optain}
\typeout{** the bibliography and then re-run LaTeX}
\typeout{** twice to fix the references!}
\typeout{******************************************}
\typeout{}
}
\end{document}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% The following lines show an example how to produce a bibliography
%% without the help of the BibTeX program. This could be used instead
%% of the above.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{thebibliography}{9}
\bibitem{Grana:2005jc}
M.~Grana,
%``Flux compactifications in string theory: A comprehensive review,''
Phys.\ Rept.\ {\bf 423}, 91 (2006)
[arXiv:hep-th/0509003].
%%CITATION = PRPLC,423,91;%%
\bibitem{Brown2000}
M.~P. Brown, and K.~Austin, \emph{The New Physique}, Publisher Name,
Publisher City, 2000, pp. 212--213.
\bibitem{BrownAustin:2000}
M.~P. Brown, and K.~Austin, \emph{Appl. Phys. Letters} \textbf{85},
2503--2504 (2000).
\bibitem{Wang}
R.~Wang, ``Title of Chapter,'' in \emph{Classic Physiques}, edited by
R.~B. Hamil, Publisher Name, Publisher City, 2000, pp. 212--213.
\bibitem{SJ:1999}
C.~D.~Smith and E.~F.~Jones, ``Load-Cycling in Cubic Press,'' in
\emph{Shock Compression of Condensed Matter-1999}, edited by M.~D.~F. et~al.,
AIP Conference Proceedings 505, American Institute of Physics, New York,
1999, pp. 651--654.
\end{thebibliography}
\endinput
%%
%% End of file `template-6s.tex'.
%
% $Id: aipcheck.tex,v 1.9 2005/12/01 16:16:27 frank Exp $
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Testing for potential problems with this class
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newif\ifproblem
\newif\ifobservation
\newif\iftimesok
\makeatletter
\def\IfStandaloneCheck{\def\next{aipcheck}
\edef\currjob{\jobname}
\edef\next{\meaning\next}
\edef\currjob{\meaning\currjob}
\ifx\currjob\next
\expandafter\@firstoftwo
\else
\expandafter\@secondoftwo
\fi
}
\makeatother
\typeout{***********************************************}
\typeout{*}
\typeout{* Testing if all files required for the aipproc}
\typeout{* class are available ...}
\typeout{*}
\typeout{***********************************************}
\typeout{*}
\typeout{* Looking for LaTeX2e ... }
\ifx\documentclass\undefined
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The aipproc class can only be used with LaTeX2e which is}
\typeout{* the standard LaTeX since 1994!}
\typeout{*}
\typeout{* Please make sure that your version of LaTeX is up-to-date}
\typeout{* before attempting to use this class.}
\typeout{*}
\expandafter\stop
\else
\typeout{* ... ok }
\fi
\def\next#1/#2/#3\next{#1#2}
\typeout{*}
\typeout{* Testing that LaTeX2e is not too old ... }
\ifnum\expandafter\next\fmtversion\next<199612 \relax
\typeout{* ... what a vintage! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The aipproc class can only be used with a recent version}
\typeout{* of LaTeX2e. Your version is dated \fmtversion\space --- but}
\typeout{* at least the 1996/12/01 version is required!}
\typeout{*}
\typeout{* Please make sure that your version of LaTeX is up-to-date}
\typeout{* before attempting to use this class.}
\typeout{*}
\expandafter\stop
\else
\ifnum\expandafter\next\fmtversion\next<199806 \relax
\typeout{* ... probably ok }
\typeout{*}
\typeout{* Your version of LaTeX2e is quite old --- the aipproc class}
\typeout{* hasn't been tested with your release.}
\typeout{*}
\typeout{* We believe that it will probably work, but if you encounter}
\typeout{* problems you will need upgrade your installation.}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\else
\typeout{* ... ok }
\fi
\fi
\typeout{*}
\typeout{* Looking for aipproc.cls ... }
\IfFileExists{aipproc.cls}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* Before you can use the aipproc class you have to unpack}
\typeout{* it from the documented source.}
\typeout{*}
\typeout{* Run LaTeX on the file 'aipproc.ins', e.g.,}
\typeout{*}
\typeout{* \space\space latex aipproc.ins}
\typeout{*}
\typeout{* or whatever is necessary on your installation to process}
\typeout{* a file with LaTeX. This should unpack a number of files for you:}
\typeout{*}
\typeout{* aipproc.cls \space and \space aip-*.clo}
\typeout{*}
\typeout{* After that retry processing this guide.}
\typeout{*}
\stop
}
\typeout{*}
\typeout{* Looking for aipxfm.sty ... }
\IfFileExists{aipxfm.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The aipxfm.sty file which is part of the aipproc distribution}
\typeout{* must be installed in a directory which is searched by LaTeX.}
\typeout{*}
\typeout{* Please install this file and retry.}
\typeout{*}
\stop
}
\typeout{*}
\typeout{* Looking for aip-8s.clo ... }
\IfFileExists{aip-8s.clo}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The aip-8s.clo file which is part of the aipproc distribution}
\typeout{* must be installed in a directory which is searched by LaTeX.}
\typeout{*}
\typeout{* Please install this file and retry.}
\typeout{*}
\stop
}
\typeout{*}
\typeout{* Looking for aip-8d.clo ... }
\IfFileExists{aip-8d.clo}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The aip-8d.clo file which is part of the aipproc distribution}
\typeout{* must be installed in a directory which is searched by LaTeX.}
\typeout{*}
\typeout{* Please install this file and retry.}
\typeout{*}
\stop
}
\typeout{*}
\typeout{* Looking for aip-6s.clo ... }
\IfFileExists{aip-6s.clo}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The aip-6s.clo file which is part of the aipproc distribution}
\typeout{* must be installed in a directory which is searched by LaTeX.}
\typeout{*}
\typeout{* Please install this file and retry.}
\typeout{*}
\stop
}
\iffalse
\typeout{*}
\typeout{* Looking for aip-arlo.clo ... }
\IfFileExists{aip-arlo.clo}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The aip-arlo.clo file which is part of the aipproc distribution}
\typeout{* must be installed in a directory which is searched by LaTeX.}
\typeout{*}
\typeout{* Please install this file and retry.}
\typeout{*}
\stop
}
\fi
\typeout{*}
\typeout{* Looking for fixltx2e.sty ... }
\IfFileExists{fixltx2e.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found, trying fix2col.sty instead ... }
\typeout{*}
\IfFileExists{fix2col.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* Your LaTeX distribution contains neither fixltx2e.sty}
\typeout{* nor fix2col.sty.}
\typeout{*}
\typeout{* This means that it is either too old or incompletely}
\typeout{* installed.}
\typeout{*}
\typeout{* fixltx2e.sty is part of the standard LaTeX distribution}
\typeout{* since 1999; fix2col.sty is an earlier version of this}
\typeout{* package.}
\typeout{*}
\typeout{* Best solution is to get the latest LaTeX distribution.}
\typeout{* If this is impossible for you, download fix2col.sty.}
\typeout{* You can get this software from a CTAN host.}
\typeout{* Refer to http://www.ctan.org and search for "fix2col".}
\typeout{*}
\typeout{* After you have updated your LaTeX distribution}
\typeout{* retry processing this guide.}
\stop
}
}
\typeout{*}
\typeout{* Looking for fontenc.sty ... }
\IfFileExists{fontenc.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The fontenc package, which is part of standard LaTeX}
\typeout{* (base distribution) has to be installed at the site to}
\typeout{* run the aipproc class.}
\typeout{*}
\typeout{* The fact that it cannot be found either means that}
\typeout{* this LaTeX release is too old or that it was installed}
\typeout{* improperly.}
\typeout{*}
\typeout{* Please make sure that your version of LaTeX is okay}
\typeout{* before attempting to use this class. The LaTeX distribution}
\typeout{* contains the file "ltxcheck.tex" which can be used to}
\typeout{* test the basic functionality and integrity of your installation.}
\typeout{*}
\stop
}
\typeout{*}
\typeout{* Looking for calc.sty ... }
\IfFileExists{calc.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Sorry this is a fatal error:}
\typeout{*}
\typeout{* The calc package, which is part of standard LaTeX}
\typeout{* (tool distribution) has to be installed at the site}
\typeout{* to run the aipproc class.}
\typeout{*}
\typeout{* The fact that it cannot be found either means that}
\typeout{* this LaTeX release is too old or that it was installed}
\typeout{* only in parts.}
\typeout{*}
\typeout{* Please make sure that the tools distribution of LaTeX}
\typeout{* is installed before attempting to use this class.}
\typeout{*}
\typeout{* (You might be able to get calc.sty separately for your}
\typeout{* installation if you are unable to upgrade to a recent}
\typeout{* distribution for some reason.)}
\typeout{*}
\stop
}
\typeout{*}
\typeout{* Looking for varioref.sty ... }
\IfFileExists{varioref.sty}
{
\typeout{* ... ok }
\gdef\variorefoptionifavailable{varioref,}
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The varioref package, which is part of standard LaTeX}
\typeout{* (tool distribution) is not installed at this site.}
\typeout{*}
\typeout{* The fact that it cannot be found either means that}
\typeout{* this LaTeX release is too old or that it was installed}
\typeout{* only in parts.}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you cannot make use of the options "varioref" or "nonvarioref".}
\typeout{*}
\typeout{* Please also note that the aipguide.tex documentation}
\typeout{* normally uses the "varioref" option to show its}
\typeout{* effects (which will now fail).}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\gdef\variorefoptionifavailable{}
\let\vpageref\pageref
\let\vref\ref
}
\typeout{*}
\typeout{* Looking for times.sty ... }
\IfFileExists{times.sty}
{
\begingroup
% load times and forget it immediately again
\RequirePackage{times}
\global\expandafter\let\csname ver@times.sty\endcsname\relax
\long\def\next{ptm}
\ifx\rmdefault\next
\typeout{* ... ok }
\gdef\psnfssproblemoption{}
\endgroup
\timesoktrue
\else
\endgroup
\typeout{* ... obsolete! }
\typeout{*}
\typeout{* Serious problem detected:}
\typeout{*}
\typeout{* The times package, which is part of standard LaTeX}
\typeout{* (psnfss distribution) is obsolete at this site.}
\typeout{*}
\typeout{* The fact that it contains incorrect code either means that}
\typeout{* this LaTeX release is too old or that it was installed}
\typeout{* only in parts with old files remaining!}
\typeout{*}
\typeout{* You can use the aipproc class without this package but}
\typeout{* you have to specify the option "cmfonts" which result in}
\typeout{* documents which are not conforming to the AIP layout specification!}
\typeout{*}
\typeout{* You can also try using the class in the following way:}
\typeout{*}
\typeout{* \space\space \string\documentclass[cmfonts]{aipproc}}
\typeout{* \space\space \string\usepackage{times}}
\typeout{* \space\space ...}
\typeout{*}
\typeout{* With luck this will result in Times Roman output but chances}
\typeout{* are that you will get a larger number of error messages in}
\typeout{* which case you have to remove the \string\usepackage declaration.}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\gdef\psnfssproblemoption{cmfonts}
\def\textdegree{$^\circ$} % used below but now
% not setup
\fi
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Serious problem detected:}
\typeout{*}
\typeout{* The times package, which is part of standard LaTeX}
\typeout{* (psnfss distribution) can not be found.}
\typeout{*}
\typeout{* The fact that this package cannot be found either means that}
\typeout{* this LaTeX release is too old or that it was installed}
\typeout{* only in parts!}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you have to specify the option "cmfonts" which result in}
\typeout{* documents which are not conforming to the AIP layout specification!}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\gdef\psnfssproblemoption{cmfonts,}
}
\iftimesok % don't bother testing other font options if times already
% bad
\typeout{*}
\typeout{* Looking for t1ptm.fd or T1ptm.fd ... }
\IfFileExists{t1ptm.fd}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found, trying T1ptm.fd ... }
\IfFileExists{T1ptm.fd}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found}
\typeout{* Serious problem detected:}
\typeout{*}
\typeout{* The times package, which is part of standard LaTeX}
\typeout{* (psnfss distribution) is available but the corresponding}
\typeout{* .fd file (defining how to load Times Roman) is missing.}
\typeout{*}
\typeout{* The fact that this package is only partially installed}
\typeout{* means that you LaTeX installation is unable to use Times}
\typeout{* Roman fonts!}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you have to specify the option "cmfonts" which result in}
\typeout{* documents which are not conforming to the AIP layout}
\typeout{* specification!}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\timesokfalse
\gdef\psnfssproblemoption{cmfonts,}
}
}
\fi
\newcommand\CheckFDFile[3]{%
\typeout{*}
\typeout{* Looking for #1#3.fd or #2#3.fd ... }
\IfFileExists{#1#3.fd}
{
\typeout{* ... ok }
}
{
\IfFileExists{#2#3.fd}
{
\typeout{* ... ok }
}
{\problemtrue
\typeout{* ... not found! }
}
}
}
\iftimesok % don't bother testing other font options if Times already bad
%\CheckFDFile{ot1}{OT1}{ot1ztmcm}
%\CheckFDFile{oml}{OML}{omlztmcm}
%\CheckFDFile{oms}{OMS}{omsztmcm}
%\CheckFDFile{omx}{OMX}{omxztmcm}
\typeout{*}
\typeout{* Looking for mathptm.sty ... }
\IfFileExists{mathptm.sty}
{
\typeout{* ... ok }
\CheckFDFile{ot1}{OT1}{ptmcm}
\CheckFDFile{oml}{OML}{ptmcm}
\CheckFDFile{oms}{OMS}{pzccm}
\CheckFDFile{omx}{OMX}{psycm}
\ifproblem
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The mathptm package, which is part of standard LaTeX}
\typeout{* (psnfss distribution) was found but some or all of its}
\typeout{* support files describing which fonts to load are missing!}
\typeout{*}
\typeout{*}
\typeout{* The fact that this package is only partially installed}
\typeout{* means that the mathptm package cannot be used!}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you have to specify the option "nomathfonts" so that}
\typeout{* math formulas will be typeset using Computer Modern.}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\gdef\psnfssproblemoption{nomathfonts,}
\else
\typeout{*}
\typeout{* Looking for mathptmx.sty ... }
\IfFileExists{mathptmx.sty}
{
\typeout{* ... ok }
\CheckFDFile{ot1}{OT1}{ztmcm}
\CheckFDFile{oml}{OML}{ztmcm}
\CheckFDFile{oms}{OMS}{ztmcm}
\CheckFDFile{omx}{OMX}{ztmcm}
\ifproblem
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The mathptmx package, which is part of standard LaTeX}
\typeout{* (psnfss distribution) was found but some or all of its}
\typeout{* support files describing which fonts to load are missing!}
\typeout{*}
\typeout{*}
\typeout{* The fact that this package is only partially installed}
\typeout{* means that the mathptmx package cannot be used!}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you have to specify the option "mathptm" (no x) so that}
\typeout{* math formulas use the older version with upright greek letters.}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\gdef\psnfssproblemoption{mathptm,}
\fi
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The mathptmx package, which is part of standard LaTeX}
\typeout{* (psnfss distribution) can not be found.}
\typeout{*}
\typeout{* This is unfortunate but not a disaster as the older}
\typeout{* version of the package "mathptm" (no x) seems to exist.}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you have to specify the option "mathptm" so that}
\typeout{* math formulas use the older version with upright greek letters.}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\gdef\psnfssproblemoption{mathptm,}
}
\fi
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The mathptm package, which is part of standard LaTeX}
\typeout{* (psnfss distribution) can not be found.}
\typeout{*}
\typeout{* The fact that this package cannot be found either means that}
\typeout{* this LaTeX release is too old or that it was installed}
\typeout{* only in parts!}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you have to specify the option "nomathfonts" so that}
\typeout{* math formulas will be typeset using Computer Modern.}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
\gdef\psnfssproblemoption{nomathfonts,}
}
\typeout{*}
\typeout{* Looking for mathtime.sty ... }
\IfFileExists{mathtime.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* The mathime package can not be found.}
\typeout{*}
\typeout{* This is not a real problem but an observation,}
\typeout{* because this package is only of interest}
\typeout{* if you own the commerical MathTime fonts.}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you cannot use the "mathtime" option of the class.}
\typeout{*}
\observationtrue
}
\typeout{*}
\typeout{* Looking for mtpro.sty ... }
\IfFileExists{mtpro.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* The mtpro package can not be found.}
\typeout{*}
\typeout{* This is not a real problem but an observation,}
\typeout{* because this package is only of interest}
\typeout{* if you own the commerical MathTime Professional fonts.}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you cannot use the "mtpro" option of the class.}
\typeout{*}
\observationtrue
}
\else
\fi % iftimesok
\typeout{*}
\typeout{* Looking for graphicx.sty ... }
\IfFileExists{graphicx.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The graphics package, which is part of standard LaTeX}
\typeout{* (graphics distribution) can not be found.}
\typeout{*}
\typeout{* The fact that this package cannot be found either means that}
\typeout{* this LaTeX release is too old or that it was installed}
\typeout{* only in parts!}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you cannot use commands like \protect\includegraphics
or \protect\resizebox}
\typeout{* in this case.}
\typeout{*}
\typeout{* Please note that you will get a further error message below}
\typeout{* about: "graphicx.sty not found" because the class will try}
\typeout{* to load this package! Type return in response to that error.}
\typeout{*}
\typeout{* As a result the illustrations in aipguide will look strange.}
\typeout{*}
\typein{* Type <return> to continue ...}
\gdef\resizebox##1##2{}
\gdef\includegraphics{\textbf{graphics package missing:}}
\problemtrue
}
\typeout{*}
\typeout{* Looking for textcomp.sty ... }
\IfFileExists{textcomp.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The textcomp package, which is part of standard LaTeX}
\typeout{* (base distribution) can not be found.}
\typeout{*}
\typeout{* The fact that this package cannot be found either means that}
\typeout{* this LaTeX release is too old or that it was installed}
\typeout{* only in parts!}
\typeout{*}
\typeout{* You can use the aipproc class without this package but }
\typeout{* you will always get the error: "textcomp.sty not found"}
\typeout{* because the class will try to load this package!}
\typeout{* Type return in response to that error.}
\typeout{*}
\typein{* Type <return> to continue ...}
\def\textdegree{$^\circ$} % used below but now
% not set up
\problemtrue
}
\typeout{*}
\typeout{* Looking for url.sty ... }
\IfFileExists{url.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The url package, which should be part of a good LaTeX}
\typeout{* distribution, can not be found.}
\typeout{*}
\typeout{* Without this package you will not be able to use the \string\url}
\typeout{* command. Try to download this package from a CTAN host.}
\typeout{* Refer to http://www.ctan.org and search for "url".}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
}
\typeout{*}
\typeout{* Looking for textcase.sty ... }
\IfFileExists{textcase.sty}
{
\typeout{* ... ok }
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Problem detected:}
\typeout{*}
\typeout{* The textcase package, which should be part of a good LaTeX}
\typeout{* distribution, can not be found.}
\typeout{*}
\typeout{* Without this package you should be careful not to put math}
\typeout{* formulas into \noexpand\section headings as these headings are}
\typeout{* converted to UPPERCASE and might spoil your formulas.}
\typeout{* Try to download this package from a CTAN host.}
\typeout{* Refer to http://www.ctan.org and search for "url".}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
}
\makeatletter
\typeout{*}
\typeout{* Looking for natbib.sty ... }
\IfFileExists{natbib.sty}
{
\IfStandaloneCheck
{\begingroup
\let\@listi\relax
\let\thebibliography\@empty
\let\bibstyle\@empty
\RequirePackage{natbib}
\@ifpackagelater{natbib}{1999/05/29}
{
\typeout{* ... ok }
}{
\typeout{* ... might be too old! }
\typeout{*}
\typeout{* Your version of the natbib package might be too}
\typeout{* old to be usable. This class was designed to}
\typeout{* work with the version 7.0 dated 1999/05/28}
\typeout{*}
\typeout{* If problems occur download a}
\typeout{* recent version from a CTAN host.}
\typeout{*}
\typeout{* Refer to http://www.ctan.org and search for "natbib".}
\typeout{*}
\typein{* Type <return> to continue ...}
\global\problemtrue
}
\endgroup
}{}
}
{
\typeout{* ... not found! }
\typeout{*}
\typeout{* Serious problem detected:}
\typeout{*}
\typeout{* The natbib package, which should be part of a good LaTeX}
\typeout{* distribution, can not be found.}
\typeout{*}
\typeout{* Without this package you will not be able to use certain}
\typeout{* citation styles. See the aipguide documentation!}
\typeout{*}
\typeout{* Especially the layout for ARLO requires this package!}
\typeout{*}
\typeout{* Try to download this package from a CTAN host.}
\typeout{* Refer to http://www.ctan.org and search for "natbib".}
\typeout{*}
\typein{* Type <return> to continue ...}
\problemtrue
}
\makeatother
\typeout{*}
\typeout{* ... finished testing}
\typeout{*}
\ifproblem
\typeout{* The tests have revealed some problems in your TeX installation.}
\typeout{*}
\typeout{* Please review the above comments carefully and read the file}
\typeout{* README for further information.}
\typeout{*}
\typeout{*****************************************************************}
\typein{* Type <return> to continue ...}
\else
\ifobservation
\typeout{****************************************************************}
\typeout{*}
\typeout{* The tests have reveiled no problems in your TeX installation,}
\typeout{* but some observations have been made; see above.}
\typeout{*}
\typeout{****************************************************************}
\else
\typeout{****************************************************************}
\typeout{*}
\typeout{* The tests have reveiled no problems in your TeX installation.}
\typeout{*}
\typeout{****************************************************************}
\fi
\fi
% if this file is run standalone stop otherwise continue
\makeatletter
\IfStandaloneCheck
{
\typeout{*}
\typeout{* This document only produces terminal output.}
\typeout{*}
\stop
}
{
\AtBeginDocument{\relax\ifx\xfm@address@loop\@undefined
\typeout{***************************}
\typeout{* Oooops ... you seem to have picked up an obsolete}
\typeout{* aipproc.cls file from a previous installation!}
\typeout{*}
\typeout{* Please check that LaTeX finds the right one.}
\typeout{*}
\typeout{* Sorry have to give up ....}
\typeout{***************************}
\stop
\fi}
}
\makeatother
\endinput
%%% Local Variables:
%%% mode: latex
%%% TeX-master: t
%%% End:
\hyphenation{Post-Script Sprin-ger}
\begin{thebibliography}{12}
\expandafter\ifx\csname natexlab\endcsname\relax\def\natexlab#1{#1}\fi
\providecommand{\enquote}[1]{``#1''}
\expandafter\ifx\csname url\endcsname\relax
\def\url#1{\texttt{#1}}\fi
\expandafter\ifx\csname urlprefix\endcsname\relax\def\urlprefix{URL }\fi
\providecommand{\eprint}[2][]{\url{#2}}
\bibitem[Grana(2006)]{Grana:2005jc}
M.~Grana, \emph{Phys. Rept.} \textbf{423}, 91--158 (2006),
\eprint{hep-th/0509003}.
\bibitem[Freed and Witten(1999)]{Freed:1999vc}
D.~S. Freed, and E.~Witten (1999), \eprint{hep-th/9907189}.
\bibitem[Maldacena et~al.(2001)]{Maldacena:2001xj}
J.~M. Maldacena, G.~W. Moore, and N.~Seiberg, \emph{JHEP} \textbf{11}, 062
(2001), \eprint{hep-th/0108100}.
\bibitem[Wecht(2007)]{Wecht:2007wu}
B.~Wecht, \emph{Class. Quant. Grav.} \textbf{24}, S773--S794 (2007),
\eprint{0708.3984}.
\bibitem[Marchesano(2006)]{Marchesano:2006ns}
F.~Marchesano, \emph{JHEP} \textbf{05}, 019 (2006), \eprint{hep-th/0603210}.
\bibitem[Loaiza-Brito(2007)]{LoaizaBrito:2006se}
O.~Loaiza-Brito, \emph{Phys. Rev.} \textbf{D76}, 106015 (2007),
\eprint{hep-th/0612088}.
\bibitem[Suzuki(1996)]{Suzuki:1995rt}
H.~Suzuki, \emph{Mod. Phys. Lett.} \textbf{A11}, 623--630 (1996),
\eprint{hep-th/9508001}.
\bibitem[Danielsson et~al.(2006)]{Danielsson:2006jg}
U.~H. Danielsson, N.~Johansson, and M.~Larfors, \emph{JHEP} \textbf{09}, 069
(2006), \eprint{hep-th/0605106}.
\bibitem[Loaiza-Brito and Oda(2007)]{LoaizaBrito:2007kz}
O.~Loaiza-Brito, and K.-y. Oda, \emph{JHEP} \textbf{08}, 002 (2007),
\eprint{hep-th/0703033}.
\bibitem[Mathur(2005)]{Mathur:2005zp}
S.~D. Mathur, \emph{Fortsch. Phys.} \textbf{53}, 793--827 (2005),
\eprint{hep-th/0502050}.
\bibitem[Greene et~al.(1995)]{Greene:1995hu}
B.~R. Greene, D.~R. Morrison, and A.~Strominger, \emph{Nucl. Phys.}
\textbf{B451}, 109--120 (1995), \eprint{hep-th/9504145}.
\bibitem[Herrera-Suarez and Loaiza-Brito(2010)]{HerreraSuarez:2009ne}
W.~Herrera-Suarez, and O.~Loaiza-Brito, \emph{Phys. Rev.} \textbf{D81}, 046002
(2010), \eprint{0906.0608}.
\end{thebibliography}