Surface Tension Effects on Surface Instabilities of Dielectric Elastomers
Extracted source text ยท arXiv 1611.06419
%% This is file `elsarticle-template-1-num.tex',
%%
%% Copyright 2009 Elsevier Ltd
%%
%% This file is part of the 'Elsarticle Bundle'.
%% ---------------------------------------------
%%
%% It may be distributed under the conditions of the LaTeX Project Public
%% License, either version 1.2 of this license or (at your option) any
%% later version. The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.2 or later is part of all distributions of LaTeX
%% version 1999/12/01 or later.
%%
%% Template article for Elsevier's document class `elsarticle'
%% with numbered style bibliographic references
%%
%% $Id: elsarticle-template-1-num.tex 149 2009-10-08 05:01:15Z rishi $
%% $URL: http://lenova.river-valley.com/svn/elsbst/trunk/elsarticle-template-1-num.tex $
%%
%% \documentclass[preprint,12pt]{elsarticle}
%% Use the option review to obtain double line spacing
%% \documentclass[preprint,review,12pt]{elsarticle}
%% Use the options 1p,twocolumn; 3p; 3p,twocolumn; 5p; or 5p,twocolumn
%% for a journal layout:
%% \documentclass[final,1p,times]{elsarticle}
%% \documentclass[final,1p,times,twocolumn]{elsarticle}
%%\documentclass[final,3p,times]{elsarticle}
%% \documentclass[final,3p,times,twocolumn]{elsarticle}
%% \documentclass[final,5p,times]{elsarticle}
\documentclass[final,5p,times,twocolumn]{elsarticle}
%% The graphicx package provides the includegraphics command.
\usepackage{graphicx}
%% The amssymb package provides various useful mathematical symbols
\usepackage{amsmath, amssymb}
\usepackage{epstopdf}
\usepackage{lmodern}
\usepackage[latin9]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{color}
\usepackage{float}
\usepackage{tabularx,ragged2e,booktabs,caption}
\usepackage{breqn}
\usepackage{pgfplots}
\pgfplotsset{compat=1.5}
\usepackage{subcaption}
%%\usepackage{hyperref}
%%\usepackage{cite}
\newcommand{\mbf}{\mathbf}
%% The amsthm package provides extended theorem environments
%% \usepackage{amsthm}
%% The lineno packages adds line numbers. Start line numbering with
%% \begin{linenumbers}, end it with \end{linenumbers}. Or switch it on
%% for the whole article with \linenumbers after \end{frontmatter}.
%% \usepackage{lineno}
%% natbib.sty is loaded by default. However, natbib options can be
%% provided with \biboptions{...} command. Following options are
%% valid:
%% round - round parentheses are used (default)
%% square - square brackets are used [option]
%% curly - curly braces are used {option}
%% angle - angle brackets are used <option>
%% semicolon - multiple citations separated by semi-colon
%% colon - same as semicolon, an earlier confusion
%% comma - separated by comma
%% numbers- selects numerical citations
%% super - numerical citations as superscripts
%% sort - sorts multiple citations according to order in ref. list
%% sort&compress - like sort, but also compresses numerical citations
%% compress - compresses without sorting
%%
%%\biboptions{comma,round}
\bibliographystyle{model2-names.bst}\biboptions{authoryear}
% \biboptions{}
\journal{International Journal of Solids and Structures}
\newcommand{\sss}[1]{\textcolor{red}{[\textit{ss}: #1]}}
\newcommand{\sssi}[1]{\textcolor{green}{[\textit{ss}: #1]}}
\newcommand{\hsp}[1]{\textcolor{blue}{[\textit{hsp}: #1]}}
\newcommand{\hspi}[1]{\textcolor{red}{#1}}
\newcommand{\hsps}[1]{\textcolor{red}{\sout{#1}}}
\begin{document}
\begin{frontmatter}
%% Title, authors and addresses
\title{Surface Tension Effects on Surface Instabilities of Dielectric Elastomers}
%% use the tnoteref command within \title for footnotes;
%% use the tnotetext command for the associated footnote;
%% use the fnref command within \author or \address for footnotes;
%% use the fntext command for the associated footnote;
%% use the corref command within \author for corresponding author footnotes;
%% use the cortext command for the associated footnote;
%% use the ead command for the email address,
%% and the form \ead[url] for the home page:
%%
%% \title{Title\tnoteref{label1}}
%%\tnotetext[label1]{}
%%\author{Name\corref{cor1}\fnref{label2}}
%%\ead{email address}
%% \ead[url]{home page}
%% \fntext[label2]{}
%% \cortext[cor1]{}
%% \address{Address\fnref{label3}}
%% \fntext[label3]{}
%% use optional labels to link authors explicitly to addresses:
%% \author[label1,label2]{<author name>}
%% \address[label1]{<address>}
%% \address[label2]{<address>}
\author[ss]{Saman Seifi}
\ead[ss]{samansei@bu.edu}
\address[ss]{Department of Mechanical Engineering, Boston University, Boston, MA 02215}
\author[qm]{Qiming Wang}
\address[qm]{Department of
Civil and Environmental Engineering,
University of Southern California, Los Angeles, CA 90089}
\ead[qm]{qimingw@usc.edu}
\author[hsp]{Harold S. Park}
\ead[hsp]{parkhs@bu.edu}
\address[hsp]{Department of Mechanical Engineering, Boston University, Boston, MA 02215}
%%\address{California, United States}
\begin{abstract}
Dielectric elastomers have recently been proposed for various biologically-relevant applications, in which they may operate in fluidic environments where surface tension effects may have a significant effect on their stability and reliability. Here, we present a theoretical analysis coupled with computational modeling for a generalized electromechanical analysis of surface stability in dielectric elastomers accounting for surface tension effects. For mechanically deformed elastomers, significant increases in critical strain and instability wavelength are observed for small elastocapillary numbers. When the elastomers are deformed electrostatically, both surface tension and the amount of pre-compression are found to substantially increase the critical electric field while decreasing the instability wavelength.
\end{abstract}
\begin{keyword}
Wrinkling Instability \sep Elastocapillary \sep Perturbation Analysis
%% keywords here, in the form: keyword \sep keyword
%% MSC codes here, in the form: \MSC code \sep code
%% or \MSC[2008] code \sep code (2000 is the default)
\end{keyword}
\end{frontmatter}
%%
%% Start line numbering here if you want
%%
%% \linenumbers
%% main text
\section{Introduction}
Because soft materials like gels and elastomers often operate under states of compression, there have been significant efforts to examine their mechanical stability under such loading~\citep{Biot1963,gent1999surface,biot1965mechanics,tanaka1987mechanical,gent2005elastic,hong2009formation}. Recently, efforts have focused on examining the stability of surfaces due to the formation of instabilities such as wrinkles and creases under compression~\citep{cao2012wrinkling,li2012mechanics,jin2014creases,cai2012creasing,hong2013crease,weiss2013creases}. The studies of wrinkling instabilities have typically been analytical in nature, based on linear perturbation analysis, which enables predictions of critical strains and instability wavelengths in these soft structures. These studies have also been insightfully combined with experiments~\citep{cai2010osmotic,cai2012creasing,Jin2015a}, and also numerical (finite element) analyses~\citep{cao2012wrinkling,jin2015smoothening,Jin2015a,wangJAM2014,wangMRS2016}.
More recently, linear perturbation analyses have been applied to an interesting class of soft, active materials - dielectric elastomers (DEs). These materials have drawn significant interest due to the large deformations they can undergo resulting from applied electrostatic loading~\citep{carpiSCIENCE2010,brochuMRC2010,biddissMEP2008,mirMT2007}. Furthermore, DEs often form surface instabilities like creasing, wrinkling and cratering, which have been studied via experiment, theory and computation~\citep{suoAMSS2010,planteIJSS2006,zhouIJSS2008,wangAM2012,shivapoojaAM2013,wangPRL2011a,wang2013creasing,parkIJSS2012,parkCMAME2013}, and also using analytic techniques based on stability analyses~\citep{zhaoAPL2007,zhao2009electromechanical} and the nonlinear field theory of~\citet{suoJMPS2008}.
While DEs have drawn significant interest in recent years, many promising technological innovations, such as generating electromechanical motion during magnetic resonance imaging~\citep{Carpi2008mri}, operating soft, underwater robots~\citep{rusNATURE2015,kimTB2013}, manipulating microfluidic flow~\citep{Holmes2013}, focusing a tunable lens~\citep{Carpi2011}, the preparation of bioinspired surfaces~\citep{shivapoojaAM2013}, underwater grippers~\citep{Laschi2012} and soft body locomotion~\citep{Marchese2014}, involve operation of the DE in fluidic environments, where elastocapillary effects due to surface tension can become prominent~\citep{romanJPCM2010,liuAMS2012}. While prior works have examined either the effects of surface tension alone on surface instabilities in elastomers~\citep{chenPRL2012} and hydrogels~\citep{kangSM2010}, or the coupled effects of surface tension and electric fields on surface instabilities in constrained DE films~\citep{wang2013creasing,seifiIJSS2016,wangJMPS2016}, a general stability analysis of compressed DE films subject to both surface tension and electric fields has not been performed.
The objective of this work is to present a theoretical analysis coupled with computational modeling for surface tension effects on surface instabilities in DEs, with particular emphasis on surface instability wavelengths, and critical strains or electric fields needed to induce the surface instabilities. We consider first the case of surface tension effects on a mechanically compressed DE film, then move on to consider the general case of electrostatic loading on a mechanically compressed DE film.
\section{Governing Equations and Incremental Forms}
\label{AppexA}
We first present, for a DE film subject to surface tension and under compressive loading, the governing equations and their incremental forms. We assume that the surface of the film is subject to Young-Laplace boundary conditions in order to account for elastocapillary effects on the surface~\citep{saksonoCM2006}. We initially neglect the effects of applied electrostatic loading (i.e. voltages or electric fields), which will be accounted for in the subsequent section. The perturbation analysis we utilize is based on those performed by \citet{cai2010osmotic,kangSM2010,jin2014creases,Jin2015a}
\subsection{Dielectric Elastomer Subject to Surface Tension}
\begin{figure}
\centering
\includegraphics[scale=0.9]{pics/wrinkle_mech1.pdf}
\caption{A perfectly flat film subject to compression and surface tension $\gamma$. (a) Undeformed configuration; (b) the formation of wrinkles with wavelength $l_c$. }
\label{fig:mechfig}
\end{figure}
We first consider a DE film under compression, that is also subject to surface tension effects on its top surface, as illustrated in Figure (\ref{fig:mechfig}). The deformation of the body is described by the field $\mathbf{x}(\mathbf{X})$. The deformation gradient is:
\begin{equation}
F_{iK}=\frac{\partial x_{i}(\mathbf{X})}{\partial{X_{K}}}
\label{eq:defgrad1}
\end{equation}
The DE is modeled as an incompressible neo-Hookean material with the free energy function:
\begin{equation}
W(\mathbf{F})=\frac{\mu}{2}F_{iK}F_{iK}-\pi(\det{\mathbf{F}}-1)
\label{eq:neoHookean}
\end{equation}
The nominal stress $s_{iK}$ can be derived as:
\begin{equation}
s_{iK}=\frac{\partial W(\mathbf{F})}{\partial F_{iK}}=\frac{\mu}{J}F_{iK}-\pi H_{iK}
\label{eq:mechstress1}
\end{equation}
where $\mathbf{H}=\mathbf{F}^{-T}$, $\mu$ is the shear modulus, and $\pi=\pi(\mathbf{X})$ is the Lagrange multiplier to enforce the constraint of incompressibility: $J=\det{\mathbf{F}}=1$.
The nominal stress satisfies the equilibrium equation:
\begin{equation}
\frac{\partial s_{iK}}{\partial X_K}=0
\label{eq:equil_equ}
\end{equation}
On the surface of the body the film is subjected to the Young-Laplace boundary condition~\citep{saksonoCM2006} with surface tension $\gamma$:
\begin{equation}
s_{iK}N_{K}dA=2\gamma\kappa n_{i} da
\label{eq:YLBC}
\end{equation}
where $\mathbf{N}$ is the unit normal vector to the surface of the body in the undeformed state, $\mathbf{n}$ is the unit normal vector in the current state, and $\kappa$ is the mean curvature of the surface.
We now add a perturbation into the state of finite deformation with position $x^{0}_{i}(\mathbf{X})$, deformation gradient $F^{0}_{iK}(\mathbf{X})$ and nominal stress $s^{0}_{iK}(\mathbf{X})$. If the deformation in the $z$-direction is constrained, only 2D deformation is considered. The deformation gradient of this state is
\begin{equation}
\mathbf{F}^{0}=
\begin{bmatrix}
\lambda & 0 \\
0 & 1/\lambda \\
\end{bmatrix}
\end{equation}
Therefore the corresponding position is $\mathbf{x}^0 = \mathbf{F}^{0}\mathbf{X}$. Now by adding a small displacement perturbation of $\dot{\mathbf{x}}$, we write the perturbed state as $\mathbf{x} = \mathbf{x}^{0}(\mathbf{X})+ \dot{\mathbf{x}}(\mathbf{X})$. Both state $\mathbf{x}^{0}(\mathbf{X})$ and the perturbed state $\mathbf{x}^{0}(\mathbf{X} )+\dot{\mathbf{x}}(\mathbf{X})$ satisfy the same governing equations in (\ref{eq:defgrad1}) and (\ref{eq:equil_equ}). The incremental form of the deformation gradient reduces to
\begin{equation}
\dot{F}_{iK}=\frac{\partial \dot{x}_{i}(\mathbf{X})}{\partial X_K}
\label{eq:defgraddot}
\end{equation}
and the equilibrium equation to
\begin{equation}
\frac{\partial \dot{s}_{iK}}{\partial X_K}=0
\label{eq:dot_equilbrium}
\end{equation}
where the incremental nominal stress can be obtained using Taylor's expansion at $\mathbf{F}^{0}$ of the stress in (\ref{eq:mechstress1}):
\begin{equation}
\dot{s}_{iK}=\mu \dot{F}_{iK}-\dot{\pi} H^{0}_{iK}+\pi^{0} H^{0}_{iL} H^{0}_{jK}\dot{F}_{jL}
\label{eq:Sigma_ij}
\end{equation}
%%\begin{equation}
%% \dot{s}_{iK}=\frac{\partial^{2}W(\mathbf{F})}{\partial F_{iK}\partial F_{jL}}\dot{F}_{jL}
%% \label{eq:stressdot1}
%%\end{equation}
Inserting (\ref{eq:Sigma_ij}) into (\ref{eq:dot_equilbrium}) we can obtain the following equation:
\begin{equation}
\left(\mu \delta_{ij}\delta_{KL}+\pi^{0}H^{0}_{iL}H^{0}_{jK}\right)\frac{\partial^{2} \dot{x}_j(\mathbf{X})}{\partial X_K \partial X_L}-H^{0}_{iK}\frac{\partial \dot{\pi}}{\partial X_K}=0
\label{eq:dotequil1}
\end{equation}
The perturbation of the incompressibility condition becomes
\begin{equation}
H^{0}_{iK}\dot{F}_{iK}=0
\label{eq:icompressdot}
\end{equation}
where the perturbation of the boundary-condition is:
\begin{equation}
\dot{s}_{iK}N_{K}=2\gamma\dot{\kappa}H^{0}_{iK}N_{K}+2\gamma\kappa \dot{H}^{0}_{iK}N_{K}
\label{eq:YPBCdot}
\end{equation}
Finally, the boundary condition on the top the film (\ref{eq:YPBCdot}) reduces to
\begin{equation}
\dot{s}_{iK}N_K=2\gamma\dot{\kappa}H^{0}_{iK}N_K
\label{eq:BC_gamma}
\end{equation}
where the term involving $\kappa$ in (\ref{eq:YPBCdot}) drops out as $\kappa=0$. At the bottom of the film, we have the boundary conditions:
\begin{equation}
\dot{s}_{12}=0 \quad \text{and} \quad \dot{x}_2=0
\label{eq:BC_bottom1}
\end{equation}
\subsection{Dielectric Elastomer with Surface Tension and Electric Field Effects}
\begin{figure}
\centering
\includegraphics[scale=0.9]{pics/wrinkle_elec_mech1.pdf}
\caption{A perfectly flat film subject to compression, electric field and surface tension $\gamma$. (a) Undeformed configuration; (b) Compressed to a given strain $\varepsilon^{pre}$, after which voltage $\Phi(t)$ is applied to the top surface while $\Phi=0$ on the bottom surface; (c) The formation of wrinkles with critical wavelength $l_c$ at critical electric potential $\Phi_c$. }
\label{fig:elecmechfig}
\end{figure}
We now consider the general problem of interest, that of a DE film that is subject to compressive loading, while accounting for both surface tension and electrostatic loading via electric fields. This is illustrated in Figure (\ref{fig:elecmechfig}). In this case, the reference state is a pre-compressed plane strain film, subject to the deformation gradient
\begin{equation}
\mathbf{F}^{pre}=
\begin{bmatrix}
\lambda^{pre} & 0 \\
0 & 1/\lambda^{pre} \\
\end{bmatrix}
\end{equation}
For this film, the net deformation gradient between the current state and the undeformed state is $F_{iK} F^{pre}_{Km}$, and the free energy of equation in (\ref{eq:neoHookean}) becomes
\begin{equation}
W(\mathbf{F})=\frac{\mu}{2}F_{iK}F^{pre}_{Km}F_{iL}F^{pre}_{Lm}-\pi(\det{\mathbf{F}}-1)
\label{eq:neHookean_pre}
\end{equation}
and therefore the nominal stress of (\ref{eq:mechstress1}) becomes
\begin{equation}
s_{iK}=\frac{\mu}{J}F^{pre}_{Km}F^{pre}_{Lm}F_{iL}-\pi H_{iK}.
\label{eq:mechstress_pre}
\end{equation}
At this state (Figure \ref{fig:elecmechfig}-b), an electric potential $\Phi$ is applied on top of the film along with the surface tension $\gamma$. When the elastomer is at the flat state, the electric field in the elastomer film is homogeneous, with the electric field vector as
\begin{equation}
\mathbf{E}=\begin{bmatrix}
0 \\
E_2 \\
\end{bmatrix}
\label{eq:elecfield}
\end{equation}
where $E_2=\Phi/h_f$ is the applied electric field where $h_f=H_f/\lambda^{pre}$ is the height of the pre-compressed film.
The electric field $\mathbf{E}$ generates an extra stress $\mathbf{s}^{e}$ inside the film. The nominal electric stress can be calculated as $\mathbf{s}^{e}=J {\sigma}^{e}\mathbf{H}^{0}$ where $\sigma^{e}=\epsilon\mathbf{E}\otimes \mathbf{E}-\frac{\epsilon}{2}|\mathbf{E}|^{2} \mathbf{I}$. Also here $\mathbf{H}^{0}=(\mathbf{F}^0)^{-T}$ where $\mathbf{F}^{0}$ is the deformation gradient that describes the post-compressed motion. Therefore we can obtain the nominal electric stress as
\begin{equation}
\mathbf{s}^{e}=J \begin{bmatrix}
-\frac{1}{2}\epsilon E^{2}_{2} & 0 \\
0 & \frac{1}{2}\epsilon E^{2}_{2}
\end{bmatrix}\mathbf{H}^{0}.
\label{eq:se1}
\end{equation}
The equilibrium equation becomes
\begin{equation}
\frac{\partial (s_{iK}+s^{e}_{iK})}{\partial X_{K}}=0
\end{equation}
With relation (\ref{eq:se1}), and the fact that the film remains flat before the onset of surface wrinkling, we have the approximation $\mathbf{F}^{0}\approx\mathbf{I}$ and therefore $(\mathbf{F}^0)^{-T}= \mathbf{H}^{0}\approx\mathbf{I}$, we can obtain $\frac{\partial s^{e}_{iK}}{\partial X_{K}}\approx0$. Thus the the stress equilibrium reduces to:
%We ramp up the voltage very slowly where it approximates a qusi-static loading, then the elastomer is taken as incompressible neo-Hookean material with negligible viscoelastic effect.
\begin{equation}
\frac{\partial s_{iK}}{\partial X_{K}} =0
\end{equation}
%We write the difference in deformation gradient, stress as $\dot{\mathbf{F}}=\mathbf{F}-\mathbf{F}^{pre}$ and $\dot{\mathbf{s}}=\mathbf{s}-\mathbf{s}^{pre}$ then the equilibrium equation becomes \citep{jin2015smoothening}:
Now similar to the previous case, we perturb the post-compressed state of deformation, of displacement $x^{0}_{i}$ and deformation gradient $\mathbf{F}^{0}$. The incremental state of stress becomes:
%%\begin{equation}
%% \dot{s}_{iK}=\left[\frac{\partial^{2} W(\mathbf{F})}{\partial{F_{iK}}\partial{F_{iL}}} \right]_{\mathbf{F}=\mathbf{F}^{pre}}\dot{F}_{iL}
%%\end{equation}
\begin{equation}
\dot{s}_{iK}=\mu F^{pre}_{Km}F^{pre}_{Lm}\dot{F}_{jL}+\pi^{0} H^{0}_{iL}H^{0}_{jK}\dot{F}_{jL}-H^{0}_{iK}\dot{\pi}
\end{equation}
and the equilibrium equation becomes:
\begin{equation}
\frac{\partial \dot{s}_{iK}}{\partial X_K}=0
\label{eq:equil_2}
\end{equation}
where it can be rewritten as:
\begin{equation}
\left(\mu F^{pre}_{Km}F^{pre}_{Lm}\delta_{ij}+\pi^{0}H^{0}_{iL}H^{0}_{jK}\right)\frac{\partial^2 x_{j}}{\partial X_K \partial X_L}-H^{0}_{iL}\frac{\partial\dot{\pi}}{\partial X_K}=0
\label{eq:equil_2_pre}
\end{equation}
%Therefore the incremental equilibrium equation is going to be:
%%\begin{equation}
%% \Sigma_{ij}=\dot{s}_{iK}F_{jK}=\mu F^{pre}_{jK}F^{pre}_{pK}L_{ip}+\pi L_{ji}-\dot{\pi}\delta_{ij}
%%\end{equation}
%\begin{equation}
% (\mu\delta_{KL}+\pi H^{pre}_{iL}H^{pre}_{jK})\frac{\partial^2 \dot{x}_j}{\partial X_{L}\partial X_{K}}-H^{pre}_{iK}\frac{\partial \dot{\pi}}{\partial X_{K}}=0
% \label{eq:dot_equilbrium2}
%\end{equation}
After rearrangement of electric stress the boundary condition on top of the film is:
\begin{equation}
\dot{s}_{iK}N_{K}=2\gamma\dot{\kappa}n_i-\dot{s}^{e}_{iK}N_K
\label{eq:BC_elec_gamma}
\end{equation}
where according to (\ref{eq:se1}) we have $\dot{s}^{e}_{iK}=\dot{\sigma}^{e}_{ij}$ as a consequence of the fact that $\mathbf{H}^{0}\approx\mathbf{I}$. By assuming the fact that the DE film undergoes a sinusoidal undulation with small amplitude $\delta$ at the onset of wrinkling, the electric field then is $(E_2)_{\delta}=\Phi/(h_f+\delta)$, and therefore the linear approximation of the electrical stress using Taylor's series becomes:
\begin{equation}
\dot{{\sigma}}^{e}=\begin{bmatrix}
\epsilon E^{2}_{2}\left(\frac{\delta}{h_f} \right) & 0 \\
0 & -\epsilon E^{2}_{2}\left(\frac{\delta}{h_f} \right)
\end{bmatrix}
\end{equation}
And finally the boundary conditions at the bottom of the film is fixed:
\begin{equation}
\dot{x}_1(X_1, H_f)=\dot{x}_2(X_1,H_f)=0
\label{eq:BC_bottom2}
\end{equation}
\section{Linear Perturbation Analysis for Wrinkles}
\label{AppexB}
\subsection{Compression with elastocapillary effect}
To determine the onset of wrinkling, we require the existence of non-trivial solutions to the eigenvalue problem corresponding to the incremental boundary value problems derived in the previous section.
Separated solution exists in the incremental boundary value problem with the perturbation in the following form:
\begin{equation}
\begin{aligned}
\dot{x}_{1}(X_1,X_2)=f_{1}(X_2)\sin( K X_1) \\
\dot{x}_{2}(X_1,X_2)=f_{2}(X_2)\cos(K X_1) \\
\dot{\pi}(X_1,X_2)=f_{3}(X_2)\cos(K X_1)
\end{aligned}
\label{eq:per_sol}
\end{equation}
Substituting these equations into (\ref{eq:dotequil1}) we obtain
\begin{equation}
f''''_{2}- K^2\left(\lambda^{-4}+1\right)f''_{2}+{K^4}{{\lambda}^{-4}}f=0
\label{eq:ODE_2}
\end{equation}
The derivatives of $f_2$ are with respect to $X_2$ and $K=2\pi/L$ is the wave number. The wavelength in the reference state $L$ relates to wavelength in current $l$ state by $L=l/\lambda$. The ODE in (\ref{eq:ODE_2}), accompanied with the boundary conditions in (\ref{eq:BC_gamma}) and (\ref{eq:BC_bottom1}), leads to an eigenvalue problem, of which the non-trivial solutions correspond to the wrinkling state. The corresponding algebraic equation of the following form then can be obtained
\begin{equation}
\varmathbb{A}\begin{bmatrix}
C_1 \\
C_2 \\
C_3 \\
C_4
\end{bmatrix}=0
\label{eq:eigen_1}
\end{equation}
The existence of a non-trivial solution to the perturbed boundary value problem requires
\begin{equation}
\det \varmathbb{A}=0
\label{eq:eig_1}
\end{equation}
where matrix $\det\varmathbb{A}$ can be written as a function of $\det\varmathbb{A}=f(\lambda,K H_f,\gamma/(\mu H_f))$. The explicit expression of this matrix is given as follows:
\begin{equation}
\begin{gathered}
A_{11}=-\frac{\gamma K H_f}{\lambda \mu }- H_f K\left(\lambda^2 +\frac{ 1}{\lambda ^2}\right) \\
A_{12}=-\frac{\gamma K H_f}{\lambda \mu }+ H_f K\left(\lambda^2 +\frac{ 1}{\lambda ^2}\right) \\
A_{13}=-\frac{\gamma H_f K^2}{\mu \lambda }-2 K H_f \\
A_{14}=-\frac{\gamma H_f K^2}{\mu \lambda }+2 K H_f
\end{gathered}
\end{equation}
\begin{equation}
\begin{gathered}
A_{21}=A_{22}=\frac{2 K H_f}{\lambda ^2} \\
A_{23}=A_{24}= \lambda ^2 K H_f+\frac{K H_f}{\lambda ^2}
\end{gathered}
\end{equation}
\begin{equation}
\begin{gathered}
A_{31}=\frac{2 K H_f \,e^{-K H_f {\lambda ^{-2}}}}{\lambda ^2} \\
A_{32}=\frac{2 K H_f \,e^{K H_f {\lambda ^{-2}}}}{\lambda ^2} \\
A_{33}=\lambda ^2 K H_f e^{-K H_f}+\frac{ K H_f e^{-K H_f}}{\lambda ^2} \\
A_{34}=\lambda ^2 K H_f e^{K H_f}+\frac{ K H_f e^{K H_f}}{\lambda ^2}
\end{gathered}
\end{equation}
\begin{equation}
\begin{gathered}
A_{41}=e^{-{K H_f}{\lambda ^{-2}}}\ ,\ A_{42}=e^{{K H_f}{\lambda ^{-2}}}\\
A_{43}=e^{-K H_f}\ , \ A_{44}=e^{K H_f}
\end{gathered}
\end{equation}
By solving the eigenvalue problem in (\ref{eq:eig_1}), we obtain the relation between stretch $\lambda$, and therefore the compressive strain $\varepsilon=1-\lambda$ with the wavelength $l$ (Figure \ref{fig:mechfig_plot}). For each curve, the minimal critical strain $\varepsilon_c=1-\lambda_c$ reaches a minimum for wrinkles of certain wavelength $l_c$. The relation of these critical values with elastocapillary number $\gamma/(\mu H_f)$ is plotted in Figure \ref{fig:mechfig_plot_fem}.
\begin{figure}
\centering
\includegraphics[scale=0.9]{pics/ew_mech.pdf}
\caption{Strain vs. wavelength for a range of elastocapillary numbers}
\label{fig:mechfig_plot}
\end{figure}
When surface tension is neglected ($\gamma=0$), we recover Biot's value of wrinkling at $\varepsilon_{w}\approx0.46$ as shown in Figure \ref{fig:mechfig_plot}~\citep{Biot1963}. When surface tension is present ($\gamma>0$), the strain $\varepsilon$ first decreases and then increases as the normalized wavelength $l/H_f$ increases (Figure \ref{fig:mechfig_plot}). The key effect of surface tension is that it inhibits bifurcation, as both the critical strain $\varepsilon_c$ and corresponding normalized wavelength $l_c/H_f$ increase with increasing $\gamma/(\mu H_f)$ (Figure \ref{fig:mechfig_plot_fem}). These results are consistent with previous studies on surface tension effects on surface instabilities~\citep{chenPRL2012}, and are expected since a smaller wavelength $l/H_f$ implies a larger energy penalty in terms of surface energy \citep{Shenoy2001}.
In addition, we find that for large elastocapillary numbers, the critical strain approaches a limiting value of $\varepsilon_{c}\approx0.85$. The largest change in critical strain occurs for small elastocapillary numbers, i.e. $0\leqslant\gamma/(\mu H_f)\leqslant 2$, where the change in $\varepsilon_c$ is more than $34\%$ from $\varepsilon_c=0.46$ for $\gamma/(\mu H_f)=0$ to $\varepsilon_c\approx0.7$ for $\gamma/(\mu H_f)=2$, while for $\gamma/(\mu H_f)>2$ the increase in $\varepsilon_c$ is less than $18\%$ (Figure \ref{fig:mechfig_plot_fem}a).
The solutions to the critical wavelength are different from the critical strain in that there is no limit to the wavelength. As with the critical strain in Figure \ref{fig:mechfig_plot_fem}a, a rapid increase in normalized wavelength is observed for small elastocapillary numbers. For $\gamma/(\mu H_f)>4$, where the change in critical strain is not significant, the normalized wavelength continues increasing in a linear fashion.
\begin{figure}
\centering
\begin{subfigure}[b]{0.425\textwidth}
\includegraphics[scale=0.9]{pics/ge_mech.pdf}
\caption{}
\end{subfigure}
\begin{subfigure}[b]{0.42\textwidth}
\includegraphics[scale=0.9]{pics/gl_mech.pdf}
\caption{}
\end{subfigure}
\caption{(a): Critical strain $\varepsilon_c$ vs. elasto-capillary number $\gamma/(\mu H_f)$; (b): Critical wavelength $l_c/H_f$ vs. elasto-capillary number $\gamma/(\mu H_f)$}
\label{fig:mechfig_plot_fem}
\end{figure}
We also verified the theoretical model by performing dynamic, nonlinear finite element (FE) calculations using the methodology for electro-elastocapillary phenomena in DEs previously developed by~\citet{seifiIJSS2016}, while neglecting the electrostatic effects, thus considering a purely mechanical problem. All numerical simulations using open source simulation code~\citet{tahoe} using standard 4-node, bilinear quadrilateral finite elements within a two-dimensional, plane strain approximation. Simulations were performed on a elastomer film with length $L_f=40$ and height of $H_f=4$ with a mesh size of $d=1/16$.
%For the first case, the mechanical instability of the elastomer film under compression is of interest. A film with length of $L_f=10$ and height of $H_f=1$ is chosen. The film is subjected to a compression in plane strain condition with constant and small strain rate. Wrinkles on top of the film surface appeared at the critical strain of $\varepsilon_c$. An extremely fine mesh is chosen $d=1/32$ where our mesh study for the classic Biot's problem with $\gamma/(\mu H_f)=0$ and $L_f/H_f=10$ shows as little as $\%3$ error with Biot's wrinkling strain $\varepsilon_w=0.46$ (Table \ref{tab:title}).
%\begin{center}
%\captionof{table}{Mesh study for Biot's problem} \label{tab:title}
%\begin{tabular}{l*{6}{c}r}
%Mesh size & $\varepsilon_c$ & Err. (${\varepsilon_w=0.46}$) \\
%\hline
%1/2 & 0.720 & \%55 \\
%1/4 & 0.571 & \%22 \\
%1/8 & 0.507 & \%9 \\
%1/16 & 0.497 & \%6 \\
%1/32 & 0.480 & \%3 \\
%\end{tabular}
%\end{center}
In the FE simulations, we measured the critical strain $\varepsilon_c$ as soon as the wrinkling pattern on surface appears, see for example (Figure \ref{fig:fem_s12}). For the comparisons to the critical strain in Figure \ref{fig:mechfig_plot_fem}(a), the FE results match the theoretical model very closely. For the normalized wavelength $l_{c}/H_{f}$ in Figure \ref{fig:mechfig_plot_fem}(b), the FE results match also closely match the theoretical model. However, we were not able to obtain the wavelength of the wrinkles for $\gamma/(\mu H_f)>2$ where the film is more than $\%70$ compressed due to the computational expense needed in modeling very long films.
\begin{figure}
\centering
\includegraphics[scale=0.3]{pics/wrinkle_mech_fe.pdf}
\caption{Results for FE simulation of a mechanical compression-induced instability of an $40\times4$ elastomer film. (a) Undeformed film (b) Onset of wrinkling instability on the top surface at the critical strain $\varepsilon_c=0.547$ and elastocapillary number $\gamma/(\mu H_f)=0.2$. _D_VEC is the displacement magnitude.}
\label{fig:fem_s12}
\end{figure}
%\hsp{Questions about Figure 4: (1) What is the limiting value of the critical strain in the plot vs. elasto-capillary number? \sss{It's $\approx0.85$ do we need to obtain it exactly from equations?)} (2) It doesn't look like there's a limiting value of the critical wavelength in the plot vs. elasto-capillary number. Why is there no limiting value there, but there is for the critical strain? \sss{There's not! This is interesting I'm still thinking about it! } (3) If we plotted the critical strain vs. elasto-capillary number out to very large elasto-capillary numbers (i.e. 100-1000), would we see any changes?\sss{I'll check}}
\subsection{Compressed film subject to surface tension and electric field}
To account for electromechanical coupling on the compression-induced instability, we substitute equations in (\ref{eq:per_sol}) into (\ref{eq:equil_2_pre}) giving the following differential equation:
\begin{equation}
f''''_2-K^2\left((\lambda^{pre})^{4}+1 \right)f''_2+K^4 (\lambda^{pre})^{4}f_2=0.
\label{eq:ODE_3}
\end{equation}
This equation along with the boundary conditions in (\ref{eq:BC_elec_gamma}) and (\ref{eq:BC_bottom2}) gives the second algebraic equation:
\begin{equation}
\varmathbb{B}\begin{bmatrix}
C_1 \\
C_2 \\
C_3 \\
C_4
\end{bmatrix}=0
\label{eq:eigen_2}
\end{equation}
The existence of a non-trivial solution requires:
\begin{equation}
\det{\varmathbb{B}}=0
\label{eq:eig_2}
\end{equation}
where the matrix $\det\varmathbb{B}$ can be written as function of dimensionless parameters $\det\varmathbb{B}=g(K H_f, \tilde{E}\sqrt{\epsilon/\mu}, \gamma/(\mu H_f) )$ and the stretch $\lambda^{pre}$ is a prescribed constant and where $\tilde{E}=\Phi/H_f$ is the nominal electric field. The explicit expression of the matrix $\varmathbb{B}$ is:
\begin{equation}
\begin{gathered}
B_{11}=-\frac{(\lambda^{pre}) ^2 \Phi^2 \epsilon }{\mu H_{f}^{2}}-\frac{\gamma H_f K^2}{\mu (\lambda^{pre}) }-2 K H_f \\
B_{12}=-\frac{(\lambda^{pre}) ^2 \Phi^2 \epsilon }{\mu H_{f}^{2}}-\frac{\gamma H_f K^2}{\mu (\lambda^{pre}) }+2 K H_f \\
B_{13}=-\frac{(\lambda^{pre}) ^2 \Phi^2 \epsilon }{\mu H_f^2}-\frac{\gamma H_f K^2}{\mu (\lambda^{pre}) }\\ - K H_f\left((\lambda^{pre}) ^2 +\frac{1}{(\lambda^{pre}) ^2}\right)\\
B_{14}=-\frac{(\lambda^{pre}) ^2 \Phi^2 \epsilon }{\mu H_f^2}-\frac{\gamma H_f K^2}{\mu (\lambda^{pre}) }\\ + K H_f\left((\lambda^{pre}) ^2 +\frac{1}{(\lambda^{pre}) ^2}\right)
\end{gathered}
\end{equation}
\begin{equation}
\begin{gathered}
B_{21}=B_{22} = -(\lambda^{pre}) ^2 K H_f-\frac{K H_f}{(\lambda^{pre}) ^2} \\
B_{23}=B_{34} = -\frac{2 K H_f}{(\lambda^{pre}) ^2}
\end{gathered}
\end{equation}
\begin{equation}
\begin{gathered}
B_{31} = (\lambda^{pre}) ^2 K H_f \left(-e^{-H_f K (\lambda^{pre})}\right) \\
B_{32} = (\lambda^{pre}) ^2 K H_f \left(e^{H_f K (\lambda^{pre})}\right) \\
B_{32} = K H_f \left(-e^{-\frac{K H_f}{(\lambda^{pre}) }}\right) \ , \
B_{34} = K H_f \left(e^{\frac{K H_f}{(\lambda^{pre}) }}\right)
\end{gathered}
\end{equation}
\begin{equation}
\begin{gathered}
B_{41} = e^{-K H_f (\lambda^{pre})} \ , \
B_{42} = e^{K H_f (\lambda^{pre})} \\
B_{43} = e^{-\frac{K H_f}{(\lambda^{pre}) }}\ , \
B_{44} = e^{\frac{K H_f}{(\lambda^{pre}) }}
\end{gathered}
\end{equation}
The solution to the eigenvalue problem in (\ref{eq:eig_2}) gives the relation between the nominal electric field and the wavelength at a given stretch $\lambda^{pre}$ for various elastocapillary numbers. For instance, Figure \ref{fig:e2_elec} shows the calculated nominal electric-field $\tilde{E}\sqrt{\epsilon/\mu}$ for inducing the wrinkling instabilities in DEs for a uniaxial compression of $\varepsilon^{pre}=0.2$. The normalized nominal electric-field first decreases and then increases as the wavelength increases. The lowest electric-field in each curve gives the critical nominal electric-field $\tilde{E}_c\sqrt{\epsilon/\mu}$ for wrinkling instability.
\begin{figure}
\centering
\includegraphics[scale=0.9]{pics/e2_elec.pdf}
\caption{Analytic solution for $\lambda^{pre}=0.8$ (or $\varepsilon^{pre}=0.2$) shows normalized nominal electric field vs. normalized wavelength for various elastocapillary numbers $\gamma/(\mu H_f)$}
\label{fig:e2_elec}
\end{figure}
\begin{figure}
\centering
\includegraphics[scale=0.9]{pics/wrinkle_elec1.pdf}
\caption{Critical electric field vs. elastocapillary number. The solid lines are the analytical results and the corresponding markers are the finite element solutions. }
\label{fig:elecfig_plot}
\end{figure}
We have recovered the analytic result in \citet{wang2013creasing} for wrinkling instability of a film without pre-compression $\varepsilon^{pre}=0$, as shown in Figure \ref{fig:elecfig_plot}. The results in Figure \ref{fig:elecfig_plot} also demonstrate that pre-compressing the DE film leads to a significant increase in the electric field that is needed to induce the surface wrinkling instability, i.e. a near doubling of the voltage is needed as the initial compressive strain increases from 0 to 40\%. Pre-stretch has been widely observed to decrease the nominal electric field required for pull-in instability~\citep{zhaoAPL2007}, thus compression induces the opposite effect, that of increasing the nominal electric field $\tilde{E}$ required for electromechanical instability.
Increasing the surface tension, and thus the elastocapillary number has a similar effect, in that the critical nominal electric field needed to induce surface wrinkling increases substantially for a given pre-compression as the elastocapillary number increases. Again, a near-doubling of the critical electric field is needed as the elastocapillary number increases from 1 to 100.
\begin{figure}
\centering
\includegraphics[scale=0.3]{pics/wrinkle_elec_fe.pdf}
\caption{FE simulation for electrically induced instability of a $160\times4$ DE film. (a) Undeformed film (b) Compressed film (in this case $\varepsilon^{pre}=0.2$) (c) Wrinkled structure due to applied electric field and surface tension (here $\gamma/(\mu H_f)=8$).}
\label{fig:elec_fem}
\end{figure}
These results were verified using the nonlinear FE method of~\citet{seifiIJSS2016}. To study the surface instability of a pre-compressed film subjected to electric field, we first statically compress a film with length of $L_f=160$ and height $H_f=4$ with mesh size $d=1/16$ to various strains of $\varepsilon^{pre}=0.1,\ 0.2,\ 0.3\ \text{and}\ 0.4$, all of which are smaller than Biot's wrinkling strain $\varepsilon_w=0.46$. Once the film is compressed, an electric potential on top of the film is applied (Figure \ref{fig:elecmechfig}-b) in conjunction with surface tension $\gamma$. The electric potential $\Phi$ was then increased linearly with time until the surface wrinkling instability occurs, where an illustration of the resulting surface wrinkling instability that is observed is shown in Figure \ref{fig:elec_fem}. The normalized critical nominal electric field $\tilde{E}_c\sqrt{\epsilon/\mu}$ is then measured as soon as the wrinkles appears on the surface. In Figure \ref{fig:elecfig_plot}, this critical electric field is plotted using symbols as a function of elastocapillary number $\gamma/(\mu H_f)$. The FE results are in a good agreement with our perturbation analysis.
\begin{figure}
\centering
\includegraphics[scale=0.9]{pics/wrinkle_elec2.pdf}
\caption{Analytic solution of critical wavelength vs. elasto-capillary number. }
\label{fig:elecfig_plot2}
\end{figure}
Finally, Figure \ref{fig:elecfig_plot2} shows that for a given elastocapillary number, the wrinkling wavelength decreases with increasing DE film compressive strain. This trend is opposite from Figure \ref{fig:mechfig_plot_fem}, where the wavelength increases with increasing elastocapillary number. This is because the pre-compressive strain $\varepsilon^{pre}$ reduces the surface area. This reduction in surface area also reduces the surface energy, which results in a decrease in the critical wavelength.
\section{Conclusions}
In conclusion, we have presented a theoretical model augmented with computational analysis to examine the surface instabilities of dielectric elastomers accounting for surface tension effects. Surface tension is found to significantly impact the nature of the surface instabilities in the DEs, both through increasing the electric fields required to induce the instability, as well as in increasing the wavelength of the resulting instability. We note that in the purely mechanical compression of soft materials, creases always occur before wrinkles regardless of the surface tension value~\citep{chenPRL2012}. However, in electromechanically coupled soft materials like DEs, wrinkles occur before creases when the elastocapillary number is larger than one~\citep{wang2013creasing}. Indeed, here we have focused on the analysis for elastocapillary numbers larger than one, as illustrated in Figs. \ref{fig:elec_fem} and \ref{fig:elecfig_plot2}.
\section{Acknowledgements}
HSP and SS acknowledge funding from the ARO, grant W911NF-14-1-0022.
%% The Appendices part is started with the command \appendix;
%% appendix sections are then done as normal sections
%\appendix
%%\begin{equation}
%% W(\mathbf{F})=\frac{\mu}{2}F_{iK}F_{iK}-\pi(\det{\mathbf{F}}-1)+\frac{J}
%%{2\varepsilon}|\mathbf{D}|^2
%%\end{equation}
%% References
%%
%% Following citation commands can be used in the body text:
%% Usage of \cite is as follows:
%% \cite{key} ==>> [#]
%% \cite[chap. 2]{key} ==>> [#, chap. 2]
%% \citet{key} ==>> Author [#]
%% References with bibTeX database:
%%\bibliographystyle{elsarticle-harv}
\bibliography{biball,park_holmes_nsf_2016.bib}
%% Authors are advised to submit their bibtex database files. They are
%% requested to list a bibtex style file in the manuscript if they do
%% not want to use model1-num-names.bst.
%% References without bibTeX database:
% \begin{thebibliography}{00}
%% \bibitem must have the following form:
%% \bibitem{key}...
%%
% \bibitem{}
% \end{thebibliography}
\end{document}
%%
%% End of file `elsarticle-template-1-num.tex'.
\begin{thebibliography}{49}
\expandafter\ifx\csname natexlab\endcsname\relax\def\natexlab#1{#1}\fi
\providecommand{\url}[1]{\texttt{#1}}
\providecommand{\href}[2]{#2}
\providecommand{\path}[1]{#1}
\providecommand{\DOIprefix}{doi:}
\providecommand{\ArXivprefix}{arXiv:}
\providecommand{\URLprefix}{URL: }
\providecommand{\Pubmedprefix}{pmid:}
\providecommand{\doi}[1]{\href{http://dx.doi.org/#1}{\path{#1}}}
\providecommand{\Pubmed}[1]{\href{pmid:#1}{\path{#1}}}
\providecommand{\bibinfo}[2]{#2}
\ifx\xfnm\relax \def\xfnm[#1]{\unskip,\space#1}\fi
%Type = Article
\bibitem[{Biddiss and Chau(2008)}]{biddissMEP2008}
\bibinfo{author}{Biddiss, E.}, \bibinfo{author}{Chau, T.},
\bibinfo{year}{2008}.
\newblock \bibinfo{title}{Dielectric elastomers as actuators for upper limb
prosthetics: challenges and opportunities}.
\newblock \bibinfo{journal}{Medical Engineering and Physics}
\bibinfo{volume}{30}, \bibinfo{pages}{403--418}.
%Type = Article
\bibitem[{Biot(1963)}]{Biot1963}
\bibinfo{author}{Biot, M.}, \bibinfo{year}{1963}.
\newblock \bibinfo{title}{Surface instability of rubber in compression}.
\newblock \bibinfo{journal}{Applied Scientific Research, Section A}
\bibinfo{volume}{12}, \bibinfo{pages}{168--182}.
%Type = Article
\bibitem[{Biot and Romain(1965)}]{biot1965mechanics}
\bibinfo{author}{Biot, M.A.}, \bibinfo{author}{Romain, J.E.},
\bibinfo{year}{1965}.
\newblock \bibinfo{title}{Mechanics of incremental deformations}.
\newblock \bibinfo{journal}{Physics Today} \bibinfo{volume}{18},
\bibinfo{pages}{68}.
%Type = Article
\bibitem[{Brochu and Pei(2010)}]{brochuMRC2010}
\bibinfo{author}{Brochu, P.}, \bibinfo{author}{Pei, Q.}, \bibinfo{year}{2010}.
\newblock \bibinfo{title}{Advances in dielectric elastomers for actuators and
artificial muscles}.
\newblock \bibinfo{journal}{Macromolecular Rapid Communications}
\bibinfo{volume}{31}, \bibinfo{pages}{10--36}.
%Type = Article
\bibitem[{Cai et~al.(2010)Cai, Bertoldi, Wang and Suo}]{cai2010osmotic}
\bibinfo{author}{Cai, S.}, \bibinfo{author}{Bertoldi, K.},
\bibinfo{author}{Wang, H.}, \bibinfo{author}{Suo, Z.}, \bibinfo{year}{2010}.
\newblock \bibinfo{title}{Osmotic collapse of a void in an elastomer:
breathing, buckling and creasing}.
\newblock \bibinfo{journal}{Soft Matter} \bibinfo{volume}{6},
\bibinfo{pages}{5770--5777}.
%Type = Article
\bibitem[{Cai et~al.(2012)Cai, Chen, Suo and Hayward}]{cai2012creasing}
\bibinfo{author}{Cai, S.}, \bibinfo{author}{Chen, D.}, \bibinfo{author}{Suo,
Z.}, \bibinfo{author}{Hayward, R.C.}, \bibinfo{year}{2012}.
\newblock \bibinfo{title}{Creasing instability of elastomer films}.
\newblock \bibinfo{journal}{Soft Matter} \bibinfo{volume}{8},
\bibinfo{pages}{1301--1304}.
%Type = Article
\bibitem[{Cao and Hutchinson(2012)}]{cao2012wrinkling}
\bibinfo{author}{Cao, Y.}, \bibinfo{author}{Hutchinson, J.W.},
\bibinfo{year}{2012}.
\newblock \bibinfo{title}{Wrinkling phenomena in neo-hookean film/substrate
bilayers}.
\newblock \bibinfo{journal}{Journal of applied mechanics} \bibinfo{volume}{79},
\bibinfo{pages}{031019}.
%Type = Article
\bibitem[{Carpi et~al.(2010)Carpi, Bauer and Rossi}]{carpiSCIENCE2010}
\bibinfo{author}{Carpi, F.}, \bibinfo{author}{Bauer, S.},
\bibinfo{author}{Rossi, D.D.}, \bibinfo{year}{2010}.
\newblock \bibinfo{title}{Stretching dielectric elastomer performance}.
\newblock \bibinfo{journal}{Science} \bibinfo{volume}{330},
\bibinfo{pages}{1759--1761}.
%Type = Article
\bibitem[{Carpi et~al.(2011)Carpi, Frediani, Turco and De~Rossi}]{Carpi2011}
\bibinfo{author}{Carpi, F.}, \bibinfo{author}{Frediani, G.},
\bibinfo{author}{Turco, S.}, \bibinfo{author}{De~Rossi, D.},
\bibinfo{year}{2011}.
\newblock \bibinfo{title}{Bioinspired tunable lens with muscle-like
electroactive elastomers}.
\newblock \bibinfo{journal}{Advanced Functional Materials}
\bibinfo{volume}{21}, \bibinfo{pages}{4152--4158}.
%Type = Article
\bibitem[{Carpi et~al.(2008)Carpi, Khanicheh, Mavroidis and
De~Rossi}]{Carpi2008mri}
\bibinfo{author}{Carpi, F.}, \bibinfo{author}{Khanicheh, A.},
\bibinfo{author}{Mavroidis, C.}, \bibinfo{author}{De~Rossi, D.},
\bibinfo{year}{2008}.
\newblock \bibinfo{title}{Mri compatibility of silicone-made contractile
dielectric elastomer actuators}.
\newblock \bibinfo{journal}{Mechatronics, IEEE/ASME Transactions on}
\bibinfo{volume}{13}, \bibinfo{pages}{370--374}.
%Type = Article
\bibitem[{Chen et~al.(2012)Chen, Cai, Suo and Hayward}]{chenPRL2012}
\bibinfo{author}{Chen, D.}, \bibinfo{author}{Cai, S.}, \bibinfo{author}{Suo,
Z.}, \bibinfo{author}{Hayward, R.C.}, \bibinfo{year}{2012}.
\newblock \bibinfo{title}{Surface energy as a barrier to creasing of elastomer
films: an elastic analogy to classical nucleation}.
\newblock \bibinfo{journal}{Physical Review Letters} \bibinfo{volume}{109},
\bibinfo{pages}{038001}.
%Type = Article
\bibitem[{Gent(2005)}]{gent2005elastic}
\bibinfo{author}{Gent, A.}, \bibinfo{year}{2005}.
\newblock \bibinfo{title}{Elastic instabilities in rubber}.
\newblock \bibinfo{journal}{International Journal of Non-Linear Mechanics}
\bibinfo{volume}{40}, \bibinfo{pages}{165--175}.
%Type = Article
\bibitem[{Gent and Cho(1999)}]{gent1999surface}
\bibinfo{author}{Gent, A.}, \bibinfo{author}{Cho, I.}, \bibinfo{year}{1999}.
\newblock \bibinfo{title}{Surface instabilities in compressed or bent rubber
blocks}.
\newblock \bibinfo{journal}{Rubber Chemistry and Technology}
\bibinfo{volume}{72}, \bibinfo{pages}{253--262}.
%Type = Article
\bibitem[{Holmes et~al.(2013)Holmes, Tavakol, Froehlicher and
Stone}]{Holmes2013}
\bibinfo{author}{Holmes, D.P.}, \bibinfo{author}{Tavakol, B.},
\bibinfo{author}{Froehlicher, G.}, \bibinfo{author}{Stone, H.A.},
\bibinfo{year}{2013}.
\newblock \bibinfo{title}{Control and manipulation of microfluidic flow via
elastic deformations}.
\newblock \bibinfo{journal}{Soft Matter} \bibinfo{volume}{9},
\bibinfo{pages}{7049--7053}.
%Type = Incollection
\bibitem[{Hong and Gao(2013)}]{hong2013crease}
\bibinfo{author}{Hong, W.}, \bibinfo{author}{Gao, F.}, \bibinfo{year}{2013}.
\newblock \bibinfo{title}{Crease instability on the surface of a solid}, in:
\bibinfo{booktitle}{Mechanical Self-Assembly}. \bibinfo{publisher}{Springer},
pp. \bibinfo{pages}{111--130}.
%Type = Article
\bibitem[{Hong et~al.(2009)Hong, Zhao and Suo}]{hong2009formation}
\bibinfo{author}{Hong, W.}, \bibinfo{author}{Zhao, X.}, \bibinfo{author}{Suo,
Z.}, \bibinfo{year}{2009}.
\newblock \bibinfo{title}{Formation of creases on the surfaces of elastomers
and gels}.
\newblock \bibinfo{journal}{Applied Physics Letters} \bibinfo{volume}{95},
\bibinfo{pages}{111901}.
%Type = Article
\bibitem[{Jin et~al.(2015)Jin, Auguste, Hayward and Suo}]{Jin2015a}
\bibinfo{author}{Jin, L.}, \bibinfo{author}{Auguste, A.},
\bibinfo{author}{Hayward, R.C.}, \bibinfo{author}{Suo, Z.},
\bibinfo{year}{2015}.
\newblock \bibinfo{title}{Bifurcation diagrams for the formation of wrinkles or
creases in soft bilayers}.
\newblock \bibinfo{journal}{Journal of Applied Mechanics} \bibinfo{volume}{82},
\bibinfo{pages}{061008}.
%Type = Article
\bibitem[{Jin et~al.(2014)Jin, Chen, Hayward and Suo}]{jin2014creases}
\bibinfo{author}{Jin, L.}, \bibinfo{author}{Chen, D.},
\bibinfo{author}{Hayward, R.C.}, \bibinfo{author}{Suo, Z.},
\bibinfo{year}{2014}.
\newblock \bibinfo{title}{Creases on the interface between two soft materials}.
\newblock \bibinfo{journal}{Soft Matter} \bibinfo{volume}{10},
\bibinfo{pages}{303--311}.
%Type = Article
\bibitem[{Jin and Suo(2015)}]{jin2015smoothening}
\bibinfo{author}{Jin, L.}, \bibinfo{author}{Suo, Z.}, \bibinfo{year}{2015}.
\newblock \bibinfo{title}{Smoothening creases on surfaces of strain-stiffening
materials}.
\newblock \bibinfo{journal}{Journal of the Mechanics and Physics of Solids}
\bibinfo{volume}{74}, \bibinfo{pages}{68--79}.
%Type = Article
\bibitem[{Kang and Huang(2010)}]{kangSM2010}
\bibinfo{author}{Kang, M.K.}, \bibinfo{author}{Huang, R.},
\bibinfo{year}{2010}.
\newblock \bibinfo{title}{Effect of surface tension on swell-induced surface
instability of substrate-confined hydrogel layers}.
\newblock \bibinfo{journal}{Soft Matter} \bibinfo{volume}{6},
\bibinfo{pages}{5637--5742}.
%Type = Article
\bibitem[{Kim et~al.(2013)Kim, Laschi and Trimmer}]{kimTB2013}
\bibinfo{author}{Kim, S.}, \bibinfo{author}{Laschi, C.},
\bibinfo{author}{Trimmer, B.}, \bibinfo{year}{2013}.
\newblock \bibinfo{title}{Soft robotics: a bioinspired evolution in robotics}.
\newblock \bibinfo{journal}{Trends in Biotechnology} \bibinfo{volume}{31},
\bibinfo{pages}{287--294}.
%Type = Article
\bibitem[{Laschi et~al.(2012)Laschi, Cianchetti, Mazzolai, Margheri, Follador
and Dario}]{Laschi2012}
\bibinfo{author}{Laschi, C.}, \bibinfo{author}{Cianchetti, M.},
\bibinfo{author}{Mazzolai, B.}, \bibinfo{author}{Margheri, L.},
\bibinfo{author}{Follador, M.}, \bibinfo{author}{Dario, P.},
\bibinfo{year}{2012}.
\newblock \bibinfo{title}{Soft robot arm inspired by the octopus}.
\newblock \bibinfo{journal}{Advanced Robotics} \bibinfo{volume}{26},
\bibinfo{pages}{709--727}.
%Type = Article
\bibitem[{Li et~al.(2012)Li, Cao, Feng and Gao}]{li2012mechanics}
\bibinfo{author}{Li, B.}, \bibinfo{author}{Cao, Y.P.}, \bibinfo{author}{Feng,
X.Q.}, \bibinfo{author}{Gao, H.}, \bibinfo{year}{2012}.
\newblock \bibinfo{title}{Mechanics of morphological instabilities and surface
wrinkling in soft materials: a review}.
\newblock \bibinfo{journal}{Soft Matter} \bibinfo{volume}{8},
\bibinfo{pages}{5728--5745}.
%Type = Article
\bibitem[{Liu and Feng(2012)}]{liuAMS2012}
\bibinfo{author}{Liu, J.L.}, \bibinfo{author}{Feng, X.Q.},
\bibinfo{year}{2012}.
\newblock \bibinfo{title}{On elastocapillarity: a review}.
\newblock \bibinfo{journal}{Acta Mechanica Sinica} \bibinfo{volume}{28},
\bibinfo{pages}{928--940}.
%Type = Article
\bibitem[{Marchese et~al.(2014)Marchese, Onal and Rus}]{Marchese2014}
\bibinfo{author}{Marchese, A.D.}, \bibinfo{author}{Onal, C.D.},
\bibinfo{author}{Rus, D.}, \bibinfo{year}{2014}.
\newblock \bibinfo{title}{Autonomous soft robotic fish capable of escape
maneuvers using fluidic elastomer actuators}.
\newblock \bibinfo{journal}{Soft Robotics} \bibinfo{volume}{1},
\bibinfo{pages}{75--87}.
%Type = Article
\bibitem[{Mirfakhrai et~al.(2007)Mirfakhrai, Madden and Baughman}]{mirMT2007}
\bibinfo{author}{Mirfakhrai, T.}, \bibinfo{author}{Madden, J.D.W.},
\bibinfo{author}{Baughman, R.H.}, \bibinfo{year}{2007}.
\newblock \bibinfo{title}{Polymer artificial muscles}.
\newblock \bibinfo{journal}{Materials Today} \bibinfo{volume}{10},
\bibinfo{pages}{30--38}.
%Type = Article
\bibitem[{Park et~al.(2012)Park, Suo, Zhou and Klein}]{parkIJSS2012}
\bibinfo{author}{Park, H.S.}, \bibinfo{author}{Suo, Z.}, \bibinfo{author}{Zhou,
J.}, \bibinfo{author}{Klein, P.A.}, \bibinfo{year}{2012}.
\newblock \bibinfo{title}{A dynamic finite element method for inhomogeneous
deformation and electromechanical instability of dielectric elastomer
transducers}.
\newblock \bibinfo{journal}{International Journal of Solids and Structures}
\bibinfo{volume}{49}, \bibinfo{pages}{2187--2194}.
%Type = Article
\bibitem[{Park et~al.(2013)Park, Wang, Zhao and Klein}]{parkCMAME2013}
\bibinfo{author}{Park, H.S.}, \bibinfo{author}{Wang, Q.},
\bibinfo{author}{Zhao, X.}, \bibinfo{author}{Klein, P.A.},
\bibinfo{year}{2013}.
\newblock \bibinfo{title}{Electromechanical instability on dielectric polymer
surface: modeling and experiment}.
\newblock \bibinfo{journal}{Computer Methods in Applied Mechanics and
Engineering} \bibinfo{volume}{260}, \bibinfo{pages}{40--49}.
%Type = Article
\bibitem[{Plante and Dubowsky(2006)}]{planteIJSS2006}
\bibinfo{author}{Plante, J.S.}, \bibinfo{author}{Dubowsky, S.},
\bibinfo{year}{2006}.
\newblock \bibinfo{title}{Large-scale failure modes of dielectric elastomer
actuators}.
\newblock \bibinfo{journal}{International Journal of Solids and Structures}
\bibinfo{volume}{43}, \bibinfo{pages}{7727--7751}.
%Type = Article
\bibitem[{Roman and Bico(2010)}]{romanJPCM2010}
\bibinfo{author}{Roman, B.}, \bibinfo{author}{Bico, J.}, \bibinfo{year}{2010}.
\newblock \bibinfo{title}{Elasto-capillarity: deforming an elastic structure
with a liquid droplet}.
\newblock \bibinfo{journal}{Journal of Physics: Condensed Matter}
\bibinfo{volume}{22}, \bibinfo{pages}{493101}.
%Type = Article
\bibitem[{Rus and Tolley(2015)}]{rusNATURE2015}
\bibinfo{author}{Rus, D.}, \bibinfo{author}{Tolley, M.T.},
\bibinfo{year}{2015}.
\newblock \bibinfo{title}{Design, fabrication and control of soft robots}.
\newblock \bibinfo{journal}{Nature} \bibinfo{volume}{521},
\bibinfo{pages}{467--475}.
%Type = Article
\bibitem[{Saksono and Peric(2006)}]{saksonoCM2006}
\bibinfo{author}{Saksono, P.H.}, \bibinfo{author}{Peric, D.},
\bibinfo{year}{2006}.
\newblock \bibinfo{title}{On finite element modelling of surface tension.
variational formulation and applications - part {I}: quasistatic problems}.
\newblock \bibinfo{journal}{Computational Mechanics} \bibinfo{volume}{38},
\bibinfo{pages}{265--281}.
%Type = Article
\bibitem[{Seifi and Park(2016)}]{seifiIJSS2016}
\bibinfo{author}{Seifi, S.}, \bibinfo{author}{Park, H.S.},
\bibinfo{year}{2016}.
\newblock \bibinfo{title}{Computational modeling of electro-elasto-capillary
phenomena in dielectric elastomers}.
\newblock \bibinfo{journal}{International Journal of Solids and Structures}
\bibinfo{volume}{87}, \bibinfo{pages}{236--244}.
%Type = Article
\bibitem[{Shenoy and Sharma(2001)}]{Shenoy2001}
\bibinfo{author}{Shenoy, V.}, \bibinfo{author}{Sharma, A.},
\bibinfo{year}{2001}.
\newblock \bibinfo{title}{Pattern formation in a thin solid film with
interactions}.
\newblock \bibinfo{journal}{Physical Review Letters} \bibinfo{volume}{86},
\bibinfo{pages}{119}.
%Type = Article
\bibitem[{Shivapooja et~al.(2013)Shivapooja, Wang, Orihuela, Rittschof, Lopez
and Zhao}]{shivapoojaAM2013}
\bibinfo{author}{Shivapooja, P.}, \bibinfo{author}{Wang, Q.},
\bibinfo{author}{Orihuela, B.}, \bibinfo{author}{Rittschof, D.},
\bibinfo{author}{Lopez, G.P.}, \bibinfo{author}{Zhao, X.},
\bibinfo{year}{2013}.
\newblock \bibinfo{title}{Bioinspired surfaces with dynamic topography for
active control of biofouling}.
\newblock \bibinfo{journal}{Advanced Materials} \bibinfo{volume}{25},
\bibinfo{pages}{1430--1434}.
%Type = Article
\bibitem[{Suo(2010)}]{suoAMSS2010}
\bibinfo{author}{Suo, Z.}, \bibinfo{year}{2010}.
\newblock \bibinfo{title}{Theory of dielectric elastomers}.
\newblock \bibinfo{journal}{Acta Mechanica Solida Sinica} \bibinfo{volume}{23},
\bibinfo{pages}{549--578}.
%Type = Article
\bibitem[{Suo et~al.(2008)Suo, Zhao and Greene}]{suoJMPS2008}
\bibinfo{author}{Suo, Z.}, \bibinfo{author}{Zhao, X.}, \bibinfo{author}{Greene,
W.H.}, \bibinfo{year}{2008}.
\newblock \bibinfo{title}{A nonlinear field theory of deformable dielectrics}.
\newblock \bibinfo{journal}{Journal of the Mechanics and Physics of Solids}
\bibinfo{volume}{56}, \bibinfo{pages}{467--486}.
%Type = Article
\bibitem[{Tahoe(2015)}]{tahoe}
\bibinfo{author}{Tahoe}, \bibinfo{year}{2015}.
\newblock \bibinfo{journal}{http://sourceforge.net/projects/tahoe/} .
%Type = Article
\bibitem[{Tanaka et~al.(1987)Tanaka, Sun, Hirokawa, Katayama, Kucera, Hirose
and Amiya}]{tanaka1987mechanical}
\bibinfo{author}{Tanaka, T.}, \bibinfo{author}{Sun, S.T.},
\bibinfo{author}{Hirokawa, Y.}, \bibinfo{author}{Katayama, S.},
\bibinfo{author}{Kucera, J.}, \bibinfo{author}{Hirose, Y.},
\bibinfo{author}{Amiya, T.}, \bibinfo{year}{1987}.
\newblock \bibinfo{title}{Mechanical instability of gels at the phase
transition}.
\newblock \bibinfo{journal}{Nature} \bibinfo{volume}{325},
\bibinfo{pages}{796--798}.
%Type = Article
\bibitem[{Wang et~al.(2012)Wang, Tahir, Zang and Zhao}]{wangAM2012}
\bibinfo{author}{Wang, Q.}, \bibinfo{author}{Tahir, M.}, \bibinfo{author}{Zang,
J.}, \bibinfo{author}{Zhao, X.}, \bibinfo{year}{2012}.
\newblock \bibinfo{title}{Dynamic electrostatic lithography: multiscale
on-demand patterning on large-area substrates}.
\newblock \bibinfo{journal}{Advanced Materials} \bibinfo{volume}{24},
\bibinfo{pages}{1947--1951}.
%Type = Article
\bibitem[{Wang et~al.(2011)Wang, Zhang and Zhao}]{wangPRL2011a}
\bibinfo{author}{Wang, Q.}, \bibinfo{author}{Zhang, L.}, \bibinfo{author}{Zhao,
X.}, \bibinfo{year}{2011}.
\newblock \bibinfo{title}{Creasing to cratering instability in polymers under
ultrahigh electric fields}.
\newblock \bibinfo{journal}{Physical Review Letters} \bibinfo{volume}{106},
\bibinfo{pages}{118301}.
%Type = Article
\bibitem[{Wang and Zhao(2013)}]{wang2013creasing}
\bibinfo{author}{Wang, Q.}, \bibinfo{author}{Zhao, X.}, \bibinfo{year}{2013}.
\newblock \bibinfo{title}{Creasing-wrinkling transition in elastomer films
under electric fields}.
\newblock \bibinfo{journal}{Physical Review E} \bibinfo{volume}{88},
\bibinfo{pages}{042403}.
%Type = Article
\bibitem[{Wang and Zhao(2014)}]{wangJAM2014}
\bibinfo{author}{Wang, Q.}, \bibinfo{author}{Zhao, X.}, \bibinfo{year}{2014}.
\newblock \bibinfo{title}{Phase diagrams of instabilities in compressed
film-substrate systems}.
\newblock \bibinfo{journal}{Journal of Applied Mechanics} \bibinfo{volume}{81},
\bibinfo{pages}{051004}.
%Type = Article
\bibitem[{Wang and Zhao(2016)}]{wangMRS2016}
\bibinfo{author}{Wang, Q.}, \bibinfo{author}{Zhao, X.}, \bibinfo{year}{2016}.
\newblock \bibinfo{title}{Beyond wrinkles: multimodal surface instabilities for
multifunctional patterning}.
\newblock \bibinfo{journal}{MRS Bulletin} \bibinfo{volume}{41},
\bibinfo{pages}{115--122}.
%Type = Article
\bibitem[{Wang et~al.(2016)Wang, Decker, Henann and Chester}]{wangJMPS2016}
\bibinfo{author}{Wang, S.}, \bibinfo{author}{Decker, M.},
\bibinfo{author}{Henann, D.L.}, \bibinfo{author}{Chester, S.A.},
\bibinfo{year}{2016}.
\newblock \bibinfo{title}{Modeling of dielectric viscoelastomers with
application to electromechanical instabilities}.
\newblock \bibinfo{journal}{Journal of the Mechanics and Physics of Solids}
\bibinfo{volume}{95}, \bibinfo{pages}{213--229}.
%Type = Article
\bibitem[{Weiss et~al.(2013)Weiss, Cai, Hu, Kang, Huang and
Suo}]{weiss2013creases}
\bibinfo{author}{Weiss, F.}, \bibinfo{author}{Cai, S.}, \bibinfo{author}{Hu,
Y.}, \bibinfo{author}{Kang, M.K.}, \bibinfo{author}{Huang, R.},
\bibinfo{author}{Suo, Z.}, \bibinfo{year}{2013}.
\newblock \bibinfo{title}{Creases and wrinkles on the surface of a swollen
gel}.
\newblock \bibinfo{journal}{Journal of Applied Physics} \bibinfo{volume}{114},
\bibinfo{pages}{073507}.
%Type = Article
\bibitem[{Zhao and Suo(2007)}]{zhaoAPL2007}
\bibinfo{author}{Zhao, X.}, \bibinfo{author}{Suo, Z.}, \bibinfo{year}{2007}.
\newblock \bibinfo{title}{Method to analyze electromechanical instability of
dielectric elastomers}.
\newblock \bibinfo{journal}{Applied Physics Letters} \bibinfo{volume}{91},
\bibinfo{pages}{061921}.
%Type = Article
\bibitem[{Zhao and Suo(2009)}]{zhao2009electromechanical}
\bibinfo{author}{Zhao, X.}, \bibinfo{author}{Suo, Z.}, \bibinfo{year}{2009}.
\newblock \bibinfo{title}{Electromechanical instability in semicrystalline
polymers}.
\newblock \bibinfo{journal}{Applied Physics Letters} \bibinfo{volume}{95},
\bibinfo{pages}{031904}.
%Type = Article
\bibitem[{Zhou et~al.(2008)Zhou, Hong, Zhao, Zhang and Suo}]{zhouIJSS2008}
\bibinfo{author}{Zhou, J.}, \bibinfo{author}{Hong, W.}, \bibinfo{author}{Zhao,
X.}, \bibinfo{author}{Zhang, Z.}, \bibinfo{author}{Suo, Z.},
\bibinfo{year}{2008}.
\newblock \bibinfo{title}{Propagation of instability in dielectric elastomers}.
\newblock \bibinfo{journal}{International Journal of Solids and Structures}
\bibinfo{volume}{45}, \bibinfo{pages}{3739--3750}.
\end{thebibliography}