Balancing Efficiency and Effectiveness: An LLM-Infused Approach for Optimized CTR Prediction
Extracted source text · arXiv 2412.06860
%%
%% This is file `sample-sigconf-authordraft.tex',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% samples.dtx (with options: `all,proceedings,bibtex,authordraft')
%%
%% IMPORTANT NOTICE:
%%
%% For the copyright see the source file.
%%
%% Any modified versions of this file must be renamed
%% with new filenames distinct from sample-sigconf-authordraft.tex.
%%
%% For distribution of the original source see the terms
%% for copying and modification in the file samples.dtx.
%%
%% This generated file may be distributed as long as the
%% original source files, as listed above, are part of the
%% same distribution. (The sources need not necessarily be
%% in the same archive or directory.)
%%
%%
%% Commands for TeXCount
%TC:macro \cite [option:text,text]
%TC:macro \citep [option:text,text]
%TC:macro \citet [option:text,text]
%TC:envir table 0 1
%TC:envir table* 0 1
%TC:envir tabular [ignore] word
%TC:envir displaymath 0 word
%TC:envir math 0 word
%TC:envir comment 0 0
%%
%%
%% The first command in your LaTeX source must be the \documentclass
%% command.
%%
%% For submission and review of your manuscript please change the
%% command to \documentclass[manuscript, screen, review]{acmart}.
%%
%% When submitting camera ready or to TAPS, please change the command
%% to \documentclass[sigconf]{acmart} or whichever template is required
%% for your publication.
%%
%%
\documentclass[sigconf,authordraft]{acmart}
%%
%% \BibTeX command to typeset BibTeX logo in the docs
\AtBeginDocument{%
\providecommand\BibTeX{{%
Bib\TeX}}}
%% Rights management information. This information is sent to you
%% when you complete the rights form. These commands have SAMPLE
%% values in them; it is your responsibility as an author to replace
%% the commands and values with those provided to you when you
%% complete the rights form.
\setcopyright{acmlicensed}
\copyrightyear{2018}
\acmYear{2018}
\acmDOI{XXXXXXX.XXXXXXX}
%% These commands are for a PROCEEDINGS abstract or paper.
\acmConference[Conference acronym 'XX]{Make sure to enter the correct
conference title from your rights confirmation emai}{June 03--05,
2018}{Woodstock, NY}
%%
%% Uncomment \acmBooktitle if the title of the proceedings is different
%% from ``Proceedings of ...''!
%%
%%\acmBooktitle{Woodstock '18: ACM Symposium on Neural Gaze Detection,
%% June 03--05, 2018, Woodstock, NY}
\acmISBN{978-1-4503-XXXX-X/18/06}
%%
%% Submission ID.
%% Use this when submitting an article to a sponsored event. You'll
%% receive a unique submission ID from the organizers
%% of the event, and this ID should be used as the parameter to this command.
%%\acmSubmissionID{123-A56-BU3}
%%
%% For managing citations, it is recommended to use bibliography
%% files in BibTeX format.
%%
%% You can then either use BibTeX with the ACM-Reference-Format style,
%% or BibLaTeX with the acmnumeric or acmauthoryear sytles, that include
%% support for advanced citation of software artefact from the
%% biblatex-software package, also separately available on CTAN.
%%
%% Look at the sample-*-biblatex.tex files for templates showcasing
%% the biblatex styles.
%%
%%
%% The majority of ACM publications use numbered citations and
%% references. The command \citestyle{authoryear} switches to the
%% "author year" style.
%%
%% If you are preparing content for an event
%% sponsored by ACM SIGGRAPH, you must use the "author year" style of
%% citations and references.
%% Uncommenting
%% the next command will enable that style.
%%\citestyle{acmauthoryear}
%%
%% end of the preamble, start of the body of the document source.
\begin{document}
%%
%% The "title" command has an optional parameter,
%% allowing the author to define a "short title" to be used in page headers.
\title{The Name of the Title Is Hope}
%%
%% The "author" command and its associated commands are used to define
%% the authors and their affiliations.
%% Of note is the shared affiliation of the first two authors, and the
%% "authornote" and "authornotemark" commands
%% used to denote shared contribution to the research.
\author{Ben Trovato}
\authornote{Both authors contributed equally to this research.}
\email{trovato@corporation.com}
\orcid{1234-5678-9012}
\author{G.K.M. Tobin}
\authornotemark[1]
\email{webmaster@marysville-ohio.com}
\affiliation{%
\institution{Institute for Clarity in Documentation}
\city{Dublin}
\state{Ohio}
\country{USA}
}
\author{Lars Th{\o}rv{\"a}ld}
\affiliation{%
\institution{The Th{\o}rv{\"a}ld Group}
\city{Hekla}
\country{Iceland}}
\email{larst@affiliation.org}
\author{Valerie B\'eranger}
\affiliation{%
\institution{Inria Paris-Rocquencourt}
\city{Rocquencourt}
\country{France}
}
\author{Aparna Patel}
\affiliation{%
\institution{Rajiv Gandhi University}
\city{Doimukh}
\state{Arunachal Pradesh}
\country{India}}
\author{Huifen Chan}
\affiliation{%
\institution{Tsinghua University}
\city{Haidian Qu}
\state{Beijing Shi}
\country{China}}
\author{Charles Palmer}
\affiliation{%
\institution{Palmer Research Laboratories}
\city{San Antonio}
\state{Texas}
\country{USA}}
\email{cpalmer@prl.com}
\author{John Smith}
\affiliation{%
\institution{The Th{\o}rv{\"a}ld Group}
\city{Hekla}
\country{Iceland}}
\email{jsmith@affiliation.org}
\author{Julius P. Kumquat}
\affiliation{%
\institution{The Kumquat Consortium}
\city{New York}
\country{USA}}
\email{jpkumquat@consortium.net}
%%
%% By default, the full list of authors will be used in the page
%% headers. Often, this list is too long, and will overlap
%% other information printed in the page headers. This command allows
%% the author to define a more concise list
%% of authors' names for this purpose.
\renewcommand{\shortauthors}{Trovato et al.}
%%
%% The abstract is a short summary of the work to be presented in the
%% article.
\begin{abstract}
A clear and well-documented \LaTeX\ document is presented as an
article formatted for publication by ACM in a conference proceedings
or journal publication. Based on the ``acmart'' document class, this
article presents and explains many of the common variations, as well
as many of the formatting elements an author may use in the
preparation of the documentation of their work.
\end{abstract}
%%
%% The code below is generated by the tool at http://dl.acm.org/ccs.cfm.
%% Please copy and paste the code instead of the example below.
%%
\begin{CCSXML}
<ccs2012>
<concept>
<concept_id>00000000.0000000.0000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>500</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>300</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>100</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>100</concept_significance>
</concept>
</ccs2012>
\end{CCSXML}
\ccsdesc[500]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc[300]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc[100]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
%%
%% Keywords. The author(s) should pick words that accurately describe
%% the work being presented. Separate the keywords with commas.
\keywords{Do, Not, Us, This, Code, Put, the, Correct, Terms, for,
Your, Paper}
%% A "teaser" image appears between the author and affiliation
%% information and the body of the document, and typically spans the
%% page.
\begin{teaserfigure}
\includegraphics[width=\textwidth]{sampleteaser}
\caption{Seattle Mariners at Spring Training, 2010.}
\Description{Enjoying the baseball game from the third-base
seats. Ichiro Suzuki preparing to bat.}
\label{fig:teaser}
\end{teaserfigure}
\received{20 February 2007}
\received[revised]{12 March 2009}
\received[accepted]{5 June 2009}
%%
%% This command processes the author and affiliation and title
%% information and builds the first part of the formatted document.
\maketitle
\section{Introduction}
ACM's consolidated article template, introduced in 2017, provides a
consistent \LaTeX\ style for use across ACM publications, and
incorporates accessibility and metadata-extraction functionality
necessary for future Digital Library endeavors. Numerous ACM and
SIG-specific \LaTeX\ templates have been examined, and their unique
features incorporated into this single new template.
If you are new to publishing with ACM, this document is a valuable
guide to the process of preparing your work for publication. If you
have published with ACM before, this document provides insight and
instruction into more recent changes to the article template.
The ``\verb|acmart|'' document class can be used to prepare articles
for any ACM publication --- conference or journal, and for any stage
of publication, from review to final ``camera-ready'' copy, to the
author's own version, with {\itshape very} few changes to the source.
\section{Template Overview}
As noted in the introduction, the ``\verb|acmart|'' document class can
be used to prepare many different kinds of documentation --- a
double-anonymous initial submission of a full-length technical paper, a
two-page SIGGRAPH Emerging Technologies abstract, a ``camera-ready''
journal article, a SIGCHI Extended Abstract, and more --- all by
selecting the appropriate {\itshape template style} and {\itshape
template parameters}.
This document will explain the major features of the document
class. For further information, the {\itshape \LaTeX\ User's Guide} is
available from
\url{https://www.acm.org/publications/proceedings-template}.
\subsection{Template Styles}
The primary parameter given to the ``\verb|acmart|'' document class is
the {\itshape template style} which corresponds to the kind of publication
or SIG publishing the work. This parameter is enclosed in square
brackets and is a part of the {\verb|documentclass|} command:
\begin{verbatim}
\documentclass[STYLE]{acmart}
\end{verbatim}
Journals use one of three template styles. All but three ACM journals
use the {\verb|acmsmall|} template style:
\begin{itemize}
\item {\texttt{acmsmall}}: The default journal template style.
\item {\texttt{acmlarge}}: Used by JOCCH and TAP.
\item {\texttt{acmtog}}: Used by TOG.
\end{itemize}
The majority of conference proceedings documentation will use the {\verb|acmconf|} template style.
\begin{itemize}
\item {\texttt{sigconf}}: The default proceedings template style.
\item{\texttt{sigchi}}: Used for SIGCHI conference articles.
\item{\texttt{sigplan}}: Used for SIGPLAN conference articles.
\end{itemize}
\subsection{Template Parameters}
In addition to specifying the {\itshape template style} to be used in
formatting your work, there are a number of {\itshape template parameters}
which modify some part of the applied template style. A complete list
of these parameters can be found in the {\itshape \LaTeX\ User's Guide.}
Frequently-used parameters, or combinations of parameters, include:
\begin{itemize}
\item {\texttt{anonymous,review}}: Suitable for a ``double-anonymous''
conference submission. Anonymizes the work and includes line
numbers. Use with the \texttt{\acmSubmissionID} command to print the
submission's unique ID on each page of the work.
\item{\texttt{authorversion}}: Produces a version of the work suitable
for posting by the author.
\item{\texttt{screen}}: Produces colored hyperlinks.
\end{itemize}
This document uses the following string as the first command in the
source file:
\begin{verbatim}
\documentclass[sigconf,authordraft]{acmart}
\end{verbatim}
\section{Modifications}
Modifying the template --- including but not limited to: adjusting
margins, typeface sizes, line spacing, paragraph and list definitions,
and the use of the \verb|\vspace| command to manually adjust the
vertical spacing between elements of your work --- is not allowed.
{\bfseries Your document will be returned to you for revision if
modifications are discovered.}
\section{Typefaces}
The ``\verb|acmart|'' document class requires the use of the
``Libertine'' typeface family. Your \TeX\ installation should include
this set of packages. Please do not substitute other typefaces. The
``\verb|lmodern|'' and ``\verb|ltimes|'' packages should not be used,
as they will override the built-in typeface families.
\section{Title Information}
The title of your work should use capital letters appropriately -
\url{https://capitalizemytitle.com/} has useful rules for
capitalization. Use the {\verb|title|} command to define the title of
your work. If your work has a subtitle, define it with the
{\verb|subtitle|} command. Do not insert line breaks in your title.
If your title is lengthy, you must define a short version to be used
in the page headers, to prevent overlapping text. The \verb|title|
command has a ``short title'' parameter:
\begin{verbatim}
\title[short title]{full title}
\end{verbatim}
\section{Authors and Affiliations}
Each author must be defined separately for accurate metadata
identification. As an exception, multiple authors may share one
affiliation. Authors' names should not be abbreviated; use full first
names wherever possible. Include authors' e-mail addresses whenever
possible.
Grouping authors' names or e-mail addresses, or providing an ``e-mail
alias,'' as shown below, is not acceptable:
\begin{verbatim}
\author{Brooke Aster, David Mehldau}
\email{dave,judy,steve@university.edu}
\email{firstname.lastname@phillips.org}
\end{verbatim}
The \verb|authornote| and \verb|authornotemark| commands allow a note
to apply to multiple authors --- for example, if the first two authors
of an article contributed equally to the work.
If your author list is lengthy, you must define a shortened version of
the list of authors to be used in the page headers, to prevent
overlapping text. The following command should be placed just after
the last \verb|\author{}| definition:
\begin{verbatim}
\renewcommand{\shortauthors}{McCartney, et al.}
\end{verbatim}
Omitting this command will force the use of a concatenated list of all
of the authors' names, which may result in overlapping text in the
page headers.
The article template's documentation, available at
\url{https://www.acm.org/publications/proceedings-template}, has a
complete explanation of these commands and tips for their effective
use.
Note that authors' addresses are mandatory for journal articles.
\section{Rights Information}
Authors of any work published by ACM will need to complete a rights
form. Depending on the kind of work, and the rights management choice
made by the author, this may be copyright transfer, permission,
license, or an OA (open access) agreement.
Regardless of the rights management choice, the author will receive a
copy of the completed rights form once it has been submitted. This
form contains \LaTeX\ commands that must be copied into the source
document. When the document source is compiled, these commands and
their parameters add formatted text to several areas of the final
document:
\begin{itemize}
\item the ``ACM Reference Format'' text on the first page.
\item the ``rights management'' text on the first page.
\item the conference information in the page header(s).
\end{itemize}
Rights information is unique to the work; if you are preparing several
works for an event, make sure to use the correct set of commands with
each of the works.
The ACM Reference Format text is required for all articles over one
page in length, and is optional for one-page articles (abstracts).
\section{CCS Concepts and User-Defined Keywords}
Two elements of the ``acmart'' document class provide powerful
taxonomic tools for you to help readers find your work in an online
search.
The ACM Computing Classification System ---
\url{https://www.acm.org/publications/class-2012} --- is a set of
classifiers and concepts that describe the computing
discipline. Authors can select entries from this classification
system, via \url{https://dl.acm.org/ccs/ccs.cfm}, and generate the
commands to be included in the \LaTeX\ source.
User-defined keywords are a comma-separated list of words and phrases
of the authors' choosing, providing a more flexible way of describing
the research being presented.
CCS concepts and user-defined keywords are required for for all
articles over two pages in length, and are optional for one- and
two-page articles (or abstracts).
\section{Sectioning Commands}
Your work should use standard \LaTeX\ sectioning commands:
\verb|section|, \verb|subsection|, \verb|subsubsection|, and
\verb|paragraph|. They should be numbered; do not remove the numbering
from the commands.
Simulating a sectioning command by setting the first word or words of
a paragraph in boldface or italicized text is {\bfseries not allowed.}
\section{Tables}
The ``\verb|acmart|'' document class includes the ``\verb|booktabs|''
package --- \url{https://ctan.org/pkg/booktabs} --- for preparing
high-quality tables.
Table captions are placed {\itshape above} the table.
Because tables cannot be split across pages, the best placement for
them is typically the top of the page nearest their initial cite. To
ensure this proper ``floating'' placement of tables, use the
environment \textbf{table} to enclose the table's contents and the
table caption. The contents of the table itself must go in the
\textbf{tabular} environment, to be aligned properly in rows and
columns, with the desired horizontal and vertical rules. Again,
detailed instructions on \textbf{tabular} material are found in the
\textit{\LaTeX\ User's Guide}.
Immediately following this sentence is the point at which
Table~\ref{tab:freq} is included in the input file; compare the
placement of the table here with the table in the printed output of
this document.
\begin{table}
\caption{Frequency of Special Characters}
\label{tab:freq}
\begin{tabular}{ccl}
\toprule
Non-English or Math&Frequency&Comments\\
\midrule
\O & 1 in 1,000& For Swedish names\\
$\pi$ & 1 in 5& Common in math\\
\$ & 4 in 5 & Used in business\\
$\Psi^2_1$ & 1 in 40,000& Unexplained usage\\
\bottomrule
\end{tabular}
\end{table}
To set a wider table, which takes up the whole width of the page's
live area, use the environment \textbf{table*} to enclose the table's
contents and the table caption. As with a single-column table, this
wide table will ``float'' to a location deemed more
desirable. Immediately following this sentence is the point at which
Table~\ref{tab:commands} is included in the input file; again, it is
instructive to compare the placement of the table here with the table
in the printed output of this document.
\begin{table*}
\caption{Some Typical Commands}
\label{tab:commands}
\begin{tabular}{ccl}
\toprule
Command &A Number & Comments\\
\midrule
\texttt{{\char'134}author} & 100& Author \\
\texttt{{\char'134}table}& 300 & For tables\\
\texttt{{\char'134}table*}& 400& For wider tables\\
\bottomrule
\end{tabular}
\end{table*}
Always use midrule to separate table header rows from data rows, and
use it only for this purpose. This enables assistive technologies to
recognise table headers and support their users in navigating tables
more easily.
\section{Math Equations}
You may want to display math equations in three distinct styles:
inline, numbered or non-numbered display. Each of the three are
discussed in the next sections.
\subsection{Inline (In-text) Equations}
A formula that appears in the running text is called an inline or
in-text formula. It is produced by the \textbf{math} environment,
which can be invoked with the usual
\texttt{{\char'134}begin\,\ldots{\char'134}end} construction or with
the short form \texttt{\$\,\ldots\$}. You can use any of the symbols
and structures, from $\alpha$ to $\omega$, available in
\LaTeX~\cite{Lamport:LaTeX}; this section will simply show a few
examples of in-text equations in context. Notice how this equation:
\begin{math}
\lim_{n\rightarrow \infty}x=0
\end{math},
set here in in-line math style, looks slightly different when
set in display style. (See next section).
\subsection{Display Equations}
A numbered display equation---one set off by vertical space from the
text and centered horizontally---is produced by the \textbf{equation}
environment. An unnumbered display equation is produced by the
\textbf{displaymath} environment.
Again, in either environment, you can use any of the symbols and
structures available in \LaTeX\@; this section will just give a couple
of examples of display equations in context. First, consider the
equation, shown as an inline equation above:
\begin{equation}
\lim_{n\rightarrow \infty}x=0
\end{equation}
Notice how it is formatted somewhat differently in
the \textbf{displaymath}
environment. Now, we'll enter an unnumbered equation:
\begin{displaymath}
\sum_{i=0}^{\infty} x + 1
\end{displaymath}
and follow it with another numbered equation:
\begin{equation}
\sum_{i=0}^{\infty}x_i=\int_{0}^{\pi+2} f
\end{equation}
just to demonstrate \LaTeX's able handling of numbering.
\section{Figures}
The ``\verb|figure|'' environment should be used for figures. One or
more images can be placed within a figure. If your figure contains
third-party material, you must clearly identify it as such, as shown
in the example below.
\begin{figure}[h]
\centering
\includegraphics[width=\linewidth]{sample-franklin}
\caption{1907 Franklin Model D roadster. Photograph by Harris \&
Ewing, Inc. [Public domain], via Wikimedia
Commons. (\url{https://goo.gl/VLCRBB}).}
\Description{A woman and a girl in white dresses sit in an open car.}
\end{figure}
Your figures should contain a caption which describes the figure to
the reader.
Figure captions are placed {\itshape below} the figure.
Every figure should also have a figure description unless it is purely
decorative. These descriptions convey what’s in the image to someone
who cannot see it. They are also used by search engine crawlers for
indexing images, and when images cannot be loaded.
A figure description must be unformatted plain text less than 2000
characters long (including spaces). {\bfseries Figure descriptions
should not repeat the figure caption – their purpose is to capture
important information that is not already provided in the caption or
the main text of the paper.} For figures that convey important and
complex new information, a short text description may not be
adequate. More complex alternative descriptions can be placed in an
appendix and referenced in a short figure description. For example,
provide a data table capturing the information in a bar chart, or a
structured list representing a graph. For additional information
regarding how best to write figure descriptions and why doing this is
so important, please see
\url{https://www.acm.org/publications/taps/describing-figures/}.
\subsection{The ``Teaser Figure''}
A ``teaser figure'' is an image, or set of images in one figure, that
are placed after all author and affiliation information, and before
the body of the article, spanning the page. If you wish to have such a
figure in your article, place the command immediately before the
\verb|\maketitle| command:
\begin{verbatim}
\begin{teaserfigure}
\includegraphics[width=\textwidth]{sampleteaser}
\caption{figure caption}
\Description{figure description}
\end{teaserfigure}
\end{verbatim}
\section{Citations and Bibliographies}
The use of \BibTeX\ for the preparation and formatting of one's
references is strongly recommended. Authors' names should be complete
--- use full first names (``Donald E. Knuth'') not initials
(``D. E. Knuth'') --- and the salient identifying features of a
reference should be included: title, year, volume, number, pages,
article DOI, etc.
The bibliography is included in your source document with these two
commands, placed just before the \verb|\end{document}| command:
\begin{verbatim}
\bibliographystyle{ACM-Reference-Format}
\bibliography{bibfile}
\end{verbatim}
where ``\verb|bibfile|'' is the name, without the ``\verb|.bib|''
suffix, of the \BibTeX\ file.
Citations and references are numbered by default. A small number of
ACM publications have citations and references formatted in the
``author year'' style; for these exceptions, please include this
command in the {\bfseries preamble} (before the command
``\verb|\begin{document}|'') of your \LaTeX\ source:
\begin{verbatim}
\citestyle{acmauthoryear}
\end{verbatim}
Some examples. A paginated journal article \cite{Abril07}, an
enumerated journal article \cite{Cohen07}, a reference to an entire
issue \cite{JCohen96}, a monograph (whole book) \cite{Kosiur01}, a
monograph/whole book in a series (see 2a in spec. document)
\cite{Harel79}, a divisible-book such as an anthology or compilation
\cite{Editor00} followed by the same example, however we only output
the series if the volume number is given \cite{Editor00a} (so
Editor00a's series should NOT be present since it has no vol. no.),
a chapter in a divisible book \cite{Spector90}, a chapter in a
divisible book in a series \cite{Douglass98}, a multi-volume work as
book \cite{Knuth97}, a couple of articles in a proceedings (of a
conference, symposium, workshop for example) (paginated proceedings
article) \cite{Andler79, Hagerup1993}, a proceedings article with
all possible elements \cite{Smith10}, an example of an enumerated
proceedings article \cite{VanGundy07}, an informally published work
\cite{Harel78}, a couple of preprints \cite{Bornmann2019,
AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a
master's thesis: \cite{anisi03}, an online document / world wide web
resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game
(Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05}
and (Case 3) a patent \cite{JoeScientist001}, work accepted for
publication \cite{rous08}, 'YYYYb'-test for prolific author
\cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might
contain 'duplicate' DOI and URLs (some SIAM articles)
\cite{Kirschmer:2010:AEI:1958016.1958018}. Boris / Barbara Beeton:
multi-volume works as books \cite{MR781536} and \cite{MR781537}. A
couple of citations with DOIs:
\cite{2004:ITE:1009386.1010128,Kirschmer:2010:AEI:1958016.1958018}. Online
citations: \cite{TUGInstmem, Thornburg01, CTANacmart}.
Artifacts: \cite{R} and \cite{UMassCitations}.
\section{Acknowledgments}
Identification of funding sources and other support, and thanks to
individuals and groups that assisted in the research and the
preparation of the work should be included in an acknowledgment
section, which is placed just before the reference section in your
document.
This section has a special environment:
\begin{verbatim}
\begin{acks}
...
\end{acks}
\end{verbatim}
so that the information contained therein can be more easily collected
during the article metadata extraction phase, and to ensure
consistency in the spelling of the section heading.
Authors should not prepare this section as a numbered or unnumbered {\verb|\section|}; please use the ``{\verb|acks|}'' environment.
\section{Appendices}
If your work needs an appendix, add it before the
``\verb|\end{document}|'' command at the conclusion of your source
document.
Start the appendix with the ``\verb|appendix|'' command:
\begin{verbatim}
\appendix
\end{verbatim}
and note that in the appendix, sections are lettered, not
numbered. This document has two appendices, demonstrating the section
and subsection identification method.
\section{Multi-language papers}
Papers may be written in languages other than English or include
titles, subtitles, keywords and abstracts in different languages (as a
rule, a paper in a language other than English should include an
English title and an English abstract). Use \verb|language=...| for
every language used in the paper. The last language indicated is the
main language of the paper. For example, a French paper with
additional titles and abstracts in English and German may start with
the following command
\begin{verbatim}
\documentclass[sigconf, language=english, language=german,
language=french]{acmart}
\end{verbatim}
The title, subtitle, keywords and abstract will be typeset in the main
language of the paper. The commands \verb|\translatedXXX|, \verb|XXX|
begin title, subtitle and keywords, can be used to set these elements
in the other languages. The environment \verb|translatedabstract| is
used to set the translation of the abstract. These commands and
environment have a mandatory first argument: the language of the
second argument. See \verb|sample-sigconf-i13n.tex| file for examples
of their usage.
\section{SIGCHI Extended Abstracts}
The ``\verb|sigchi-a|'' template style (available only in \LaTeX\ and
not in Word) produces a landscape-orientation formatted article, with
a wide left margin. Three environments are available for use with the
``\verb|sigchi-a|'' template style, and produce formatted output in
the margin:
\begin{description}
\item[\texttt{sidebar}:] Place formatted text in the margin.
\item[\texttt{marginfigure}:] Place a figure in the margin.
\item[\texttt{margintable}:] Place a table in the margin.
\end{description}
%%
%% The acknowledgments section is defined using the "acks" environment
%% (and NOT an unnumbered section). This ensures the proper
%% identification of the section in the article metadata, and the
%% consistent spelling of the heading.
\begin{acks}
To Robert, for the bagels and explaining CMYK and color spaces.
\end{acks}
%%
%% The next two lines define the bibliography style to be used, and
%% the bibliography file.
\bibliographystyle{ACM-Reference-Format}
\bibliography{sample-base}
%%
%% If your work has an appendix, this is the place to put it.
\appendix
\section{Research Methods}
\subsection{Part One}
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi
malesuada, quam in pulvinar varius, metus nunc fermentum urna, id
sollicitudin purus odio sit amet enim. Aliquam ullamcorper eu ipsum
vel mollis. Curabitur quis dictum nisl. Phasellus vel semper risus, et
lacinia dolor. Integer ultricies commodo sem nec semper.
\subsection{Part Two}
Etiam commodo feugiat nisl pulvinar pellentesque. Etiam auctor sodales
ligula, non varius nibh pulvinar semper. Suspendisse nec lectus non
ipsum convallis congue hendrerit vitae sapien. Donec at laoreet
eros. Vivamus non purus placerat, scelerisque diam eu, cursus
ante. Etiam aliquam tortor auctor efficitur mattis.
\section{Online Resources}
Nam id fermentum dui. Suspendisse sagittis tortor a nulla mollis, in
pulvinar ex pretium. Sed interdum orci quis metus euismod, et sagittis
enim maximus. Vestibulum gravida massa ut felis suscipit
congue. Quisque mattis elit a risus ultrices commodo venenatis eget
dui. Etiam sagittis eleifend elementum.
Nam interdum magna at lectus dignissim, ac dignissim lorem
rhoncus. Maecenas eu arcu ac neque placerat aliquam. Nunc pulvinar
massa et mattis lacinia.
\end{document}
\endinput
%%
%% End of file `sample-sigconf-authordraft.tex'.
%%
%% This is file `sample-sigconf-i13n.tex',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% samples.dtx (with options: `all,proceedings,bibtex,sigconf-i13n')
%%
%% IMPORTANT NOTICE:
%%
%% For the copyright see the source file.
%%
%% Any modified versions of this file must be renamed
%% with new filenames distinct from sample-sigconf-i13n.tex.
%%
%% For distribution of the original source see the terms
%% for copying and modification in the file samples.dtx.
%%
%% This generated file may be distributed as long as the
%% original source files, as listed above, are part of the
%% same distribution. (The sources need not necessarily be
%% in the same archive or directory.)
%%
%%
%% Commands for TeXCount
%TC:macro \cite [option:text,text]
%TC:macro \citep [option:text,text]
%TC:macro \citet [option:text,text]
%TC:envir table 0 1
%TC:envir table* 0 1
%TC:envir tabular [ignore] word
%TC:envir displaymath 0 word
%TC:envir math 0 word
%TC:envir comment 0 0
%%
%%
%% The first command in your LaTeX source must be the \documentclass
%% command.
%%
%% For submission and review of your manuscript please change the
%% command to \documentclass[manuscript, screen, review]{acmart}.
%%
%% When submitting camera ready or to TAPS, please change the command
%% to \documentclass[sigconf]{acmart} or whichever template is required
%% for your publication.
%%
%%
\documentclass[sigconf, language=french,
language=german, language=spanish, language=english]{acmart}
%%
%% \BibTeX command to typeset BibTeX logo in the docs
\AtBeginDocument{%
\providecommand\BibTeX{{%
Bib\TeX}}}
%% Rights management information. This information is sent to you
%% when you complete the rights form. These commands have SAMPLE
%% values in them; it is your responsibility as an author to replace
%% the commands and values with those provided to you when you
%% complete the rights form.
\setcopyright{acmlicensed}
\copyrightyear{2018}
\acmYear{2018}
\acmDOI{XXXXXXX.XXXXXXX}
%% These commands are for a PROCEEDINGS abstract or paper.
\acmConference[Conference acronym 'XX]{Make sure to enter the correct
conference title from your rights confirmation emai}{June 03--05,
2018}{Woodstock, NY}
%%
%% Uncomment \acmBooktitle if the title of the proceedings is different
%% from ``Proceedings of ...''!
%%
%%\acmBooktitle{Woodstock '18: ACM Symposium on Neural Gaze Detection,
%% June 03--05, 2018, Woodstock, NY}
\acmISBN{978-1-4503-XXXX-X/18/06}
%%
%% Submission ID.
%% Use this when submitting an article to a sponsored event. You'll
%% receive a unique submission ID from the organizers
%% of the event, and this ID should be used as the parameter to this command.
%%\acmSubmissionID{123-A56-BU3}
%%
%% For managing citations, it is recommended to use bibliography
%% files in BibTeX format.
%%
%% You can then either use BibTeX with the ACM-Reference-Format style,
%% or BibLaTeX with the acmnumeric or acmauthoryear sytles, that include
%% support for advanced citation of software artefact from the
%% biblatex-software package, also separately available on CTAN.
%%
%% Look at the sample-*-biblatex.tex files for templates showcasing
%% the biblatex styles.
%%
%%
%% The majority of ACM publications use numbered citations and
%% references. The command \citestyle{authoryear} switches to the
%% "author year" style.
%%
%% If you are preparing content for an event
%% sponsored by ACM SIGGRAPH, you must use the "author year" style of
%% citations and references.
%% Uncommenting
%% the next command will enable that style.
%%\citestyle{acmauthoryear}
%%
%% end of the preamble, start of the body of the document source.
\begin{document}
%%
%% The "title" command has an optional parameter,
%% allowing the author to define a "short title" to be used in page headers.
\title{The Name of the Title Is Hope}
\translatedtitle{french}{Le nom du titre est l'espoir}
\translatedtitle{german}{Der Name des Titels ist 'Hoffnung'}
\translatedtitle{spanish}{El nombre del título es esperanza}
%%
%% The "author" command and its associated commands are used to define
%% the authors and their affiliations.
%% Of note is the shared affiliation of the first two authors, and the
%% "authornote" and "authornotemark" commands
%% used to denote shared contribution to the research.
\author{Ben Trovato}
\authornote{Both authors contributed equally to this research.}
\email{trovato@corporation.com}
\orcid{1234-5678-9012}
\author{G.K.M. Tobin}
\authornotemark[1]
\email{webmaster@marysville-ohio.com}
\affiliation{%
\institution{Institute for Clarity in Documentation}
\city{Dublin}
\state{Ohio}
\country{USA}
}
\author{Lars Th{\o}rv{\"a}ld}
\affiliation{%
\institution{The Th{\o}rv{\"a}ld Group}
\city{Hekla}
\country{Iceland}}
\email{larst@affiliation.org}
\author{Valerie B\'eranger}
\affiliation{%
\institution{Inria Paris-Rocquencourt}
\city{Rocquencourt}
\country{France}
}
\author{Aparna Patel}
\affiliation{%
\institution{Rajiv Gandhi University}
\city{Doimukh}
\state{Arunachal Pradesh}
\country{India}}
\author{Huifen Chan}
\affiliation{%
\institution{Tsinghua University}
\city{Haidian Qu}
\state{Beijing Shi}
\country{China}}
\author{Charles Palmer}
\affiliation{%
\institution{Palmer Research Laboratories}
\city{San Antonio}
\state{Texas}
\country{USA}}
\email{cpalmer@prl.com}
\author{John Smith}
\affiliation{%
\institution{The Th{\o}rv{\"a}ld Group}
\city{Hekla}
\country{Iceland}}
\email{jsmith@affiliation.org}
\author{Julius P. Kumquat}
\affiliation{%
\institution{The Kumquat Consortium}
\city{New York}
\country{USA}}
\email{jpkumquat@consortium.net}
%%
%% By default, the full list of authors will be used in the page
%% headers. Often, this list is too long, and will overlap
%% other information printed in the page headers. This command allows
%% the author to define a more concise list
%% of authors' names for this purpose.
\renewcommand{\shortauthors}{Trovato et al.}
%%
%% The abstract is a short summary of the work to be presented in the
%% article.
\begin{abstract}
A clear and well-documented \LaTeX\ document is presented as an
article formatted for publication by ACM in a conference proceedings
or journal publication. Based on the ``acmart'' document class, this
article presents and explains many of the common variations, as well
as many of the formatting elements an author may use in the
preparation of the documentation of their work.
\end{abstract}
\begin{translatedabstract}{french}
Un document \LaTeX\ clair et bien documenté est présenté comme un
article formaté pour publication par ACM dans les actes d'une
conférence ou parution dans une revue. Basé sur la classe de
document ``acmart'', ce l'article présente et explique de nombreuses
variations courantes, ainsi que autant d'éléments de mise en forme
qu'un auteur peut utiliser dans le préparation de la documentation
de leur travail.
\end{translatedabstract}
\begin{translatedabstract}{german}
Es wird ein übersichtliches und gut dokumentiertes \LaTeX\-Dokument präsentiert,
welches für die Veröffentlichung durch ACM in einem Tagungsband oder
als Zeitschriftenpublikation formatiert wurde.
Basierend auf der Dokumentenklasse ``acmart'' präsentiert und erklärt dieser Artikel
viele der Formatierungselemente sowie auch viele der gängigen Variationen,
die ein Autor bei der Beschreibung seiner Arbeit verwenden darf.
\end{translatedabstract}
\begin{translatedabstract}{spanish}
Un documento \LaTeX\ claro y bien documentado se presenta como un
artículo formateado para su publicación por ACM en las actas de una
conferencia o publicación de una revista. Basado en la clase de
documento ``acmart'', este artículo presenta y explica muchas de las
variaciones comunes, así como tantos de los elementos de formato que
un autor puede usar en el preparación de la documentación de su
trabajo.
\end{translatedabstract}
%%
%% The code below is generated by the tool at http://dl.acm.org/ccs.cfm.
%% Please copy and paste the code instead of the example below.
%%
\begin{CCSXML}
<ccs2012>
<concept>
<concept_id>00000000.0000000.0000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>500</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>300</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>100</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>100</concept_significance>
</concept>
</ccs2012>
\end{CCSXML}
\ccsdesc[500]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc[300]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc[100]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
%%
%% Keywords. The author(s) should pick words that accurately describe
%% the work being presented. Separate the keywords with commas.
\keywords{Do, Not, Us, This, Code, Put, the, Correct, Terms, for,
Your, Paper}
\translatedkeywords{french}{ensembles de données,
réseaux de neurones,
détection du regard, marquage de texte}
\translatedkeywords{german}{Datensammlungen,
neuronale Netze, Blickerkennung, Textklassifizierung}
\translatedkeywords{spanish}{conjuntos de datos,
redes neuronales, detección de mirada, etiquetado de texto}
%% A "teaser" image appears between the author and affiliation
%% information and the body of the document, and typically spans the
%% page.
\begin{teaserfigure}
\includegraphics[width=\textwidth]{sampleteaser}
\caption{Seattle Mariners at Spring Training, 2010.}
\Description{Enjoying the baseball game from the third-base
seats. Ichiro Suzuki preparing to bat.}
\label{fig:teaser}
\end{teaserfigure}
\received{20 February 2007}
\received[revised]{12 March 2009}
\received[accepted]{5 June 2009}
%%
%% This command processes the author and affiliation and title
%% information and builds the first part of the formatted document.
\maketitle
\section{Introduction}
ACM's consolidated article template, introduced in 2017, provides a
consistent \LaTeX\ style for use across ACM publications, and
incorporates accessibility and metadata-extraction functionality
necessary for future Digital Library endeavors. Numerous ACM and
SIG-specific \LaTeX\ templates have been examined, and their unique
features incorporated into this single new template.
If you are new to publishing with ACM, this document is a valuable
guide to the process of preparing your work for publication. If you
have published with ACM before, this document provides insight and
instruction into more recent changes to the article template.
The ``\verb|acmart|'' document class can be used to prepare articles
for any ACM publication --- conference or journal, and for any stage
of publication, from review to final ``camera-ready'' copy, to the
author's own version, with {\itshape very} few changes to the source.
\section{Template Overview}
As noted in the introduction, the ``\verb|acmart|'' document class can
be used to prepare many different kinds of documentation --- a
double-anonymous initial submission of a full-length technical paper, a
two-page SIGGRAPH Emerging Technologies abstract, a ``camera-ready''
journal article, a SIGCHI Extended Abstract, and more --- all by
selecting the appropriate {\itshape template style} and {\itshape
template parameters}.
This document will explain the major features of the document
class. For further information, the {\itshape \LaTeX\ User's Guide} is
available from
\url{https://www.acm.org/publications/proceedings-template}.
\subsection{Template Styles}
The primary parameter given to the ``\verb|acmart|'' document class is
the {\itshape template style} which corresponds to the kind of publication
or SIG publishing the work. This parameter is enclosed in square
brackets and is a part of the {\verb|documentclass|} command:
\begin{verbatim}
\documentclass[STYLE]{acmart}
\end{verbatim}
Journals use one of three template styles. All but three ACM journals
use the {\verb|acmsmall|} template style:
\begin{itemize}
\item {\texttt{acmsmall}}: The default journal template style.
\item {\texttt{acmlarge}}: Used by JOCCH and TAP.
\item {\texttt{acmtog}}: Used by TOG.
\end{itemize}
The majority of conference proceedings documentation will use the {\verb|acmconf|} template style.
\begin{itemize}
\item {\texttt{sigconf}}: The default proceedings template style.
\item{\texttt{sigchi}}: Used for SIGCHI conference articles.
\item{\texttt{sigplan}}: Used for SIGPLAN conference articles.
\end{itemize}
\subsection{Related but not used}
Dynamic Fusion for Multimodal Input
The theoretical foundation of dynamic fusion methods suggests that when the fusion weights are negatively correlated with the generalization error of individual modalities, dynamic fusion methods outperform static fusion in terms of generalization capability. In our business system, data is typically sparse and exhibits a strong Matthew effect. Consequently, in click-through rate (CTR) model training, the representation of product IDs may be inadequately learned. However, our scenario involves products with both textual and visual multimodal data. Product descriptions contain significant information, and images occupy substantial space on the page as shown in Figure \ref{fig:mobile_page}. Applying dynamic fusion methods in our context can leverage information from different modalities to generate better user and item representations, thereby enhancing the accuracy and robustness of recommendations. Dynamic fusion methods can dynamically adjust the weights of ID, text, and image data based on their quality in the recommendation system.
\begin{figure}[h]
\centering
\includegraphics[width=0.8\textwidth]{mobile_page}
\caption{Screenshot for app}
\label{fig:mobile_page}
\end{figure}
We refer to the methodology outlined in the paper DynMM \cite{REFERENCE}, employing the DynMM approach to model the three modalities of target products. It adapts the fusion path based on the characteristics of the input data, achieving computational savings and performance enhancements during inference. For "simple" inputs, DynMM can activate only a subset of modality paths, conserving computational resources. For "complex" inputs, DynMM can utilize all modalities and complex fusion operations to ensure prediction accuracy. At the modality level, DynMM employs a gating network to select which modality paths to activate. The model design can be seen in Figure \ref{fig:DynMM}. The specific steps are as follows:
\begin{figure}[ht]
\centering
\includegraphics[width=\linewidth]{DynMM.png}
\caption{The illustration of DynMM}
\label{fig:DynMM}
\end{figure}
\begin{enumerate}
\item \textbf{Expert Network Design:} Design a set of expert networks, each specializing in processing part or all of the modalities. For instance, for tri-modal data (text, image, audio), there could be up to seven expert networks, each handling single, dual, and tri-modal combinations.
\item \textbf{Gating Network:} The gating network \( G(x) \) generates a sparse vector \( g \) based on the input data, determining which expert networks to activate. The output \( y \) can be represented as:
\end{enumerate}
\begin{equation}
y = \sum_{i=1}^{B} g_i E_i(x_i)
\end{equation}
where \( E_i \) is the \( i \)-th expert network, and \( x_i \) is its input modality subset. Combining all the modalities for the input of CTR task gives the following:
\begin{enumerate}
\item \textbf{Input Representation:}
\begin{equation}
x = [x_{\text{text}}, x_{\text{image}}]
\end{equation}
The input \( x \) consists of textual data \( x_{\text{text}} \) and image data \( x_{\text{image}} \).
\item \textbf{Feature Extraction:}
\begin{equation}
h_{\text{text}} = f_{\text{text}}(x_{\text{text}})
\end{equation}
\begin{equation}
h_{\text{image}} = f_{\text{image}}(x_{\text{image}})
\end{equation}
The features are extracted from the textual data using a textual feature extractor \( f_{\text{text}} \) and from the image data using an image feature extractor \( f_{\text{image}} \). The resulting features are \( h_{\text{text}} \) and \( h_{\text{image}} \), respectively.
\item \textbf{Dynamic Fusion:}
\begin{equation}
w_{\text{text}}, w_{\text{image}} = \text{DynamicWeights}(h_{\text{text}}, h_{\text{image}})
\end{equation}
\begin{equation}
h_{\text{fused}} = w_{\text{text}} \cdot h_{\text{text}} + w_{\text{image}} \cdot h_{\text{image}}
\end{equation}
The dynamic fusion weights \( w_{\text{text}} \) and \( w_{\text{image}} \) are computed based on the extracted features. These weights are used to combine the features into a fused representation \( h_{\text{fused}} \).
\item \textbf{CTR Prediction:}
\begin{equation}
\hat{y} = g(h_{\text{fused}})
\end{equation}
The fused representation \( h_{\text{fused}} \) is fed into the CTR prediction model \( g \) to produce the final prediction \( \hat{y} \).
\item \textbf{Loss Function:}
\begin{equation}
\mathcal{L}_{\text{CTR}} = \text{Loss}(\hat{y}, y)
\end{equation}
The loss function \( \mathcal{L}_{\text{CTR}} \) measures the difference between the predicted CTR \( \hat{y} \) and the true CTR \( y \).
\item \textbf{Optimization:}
\begin{equation}
\theta^* = \arg \min_{\theta} \mathcal{L}_{\text{CTR}}
\end{equation}
The model parameters \( \theta \) are optimized to minimize the CTR loss \( \mathcal{L}_{\text{CTR}} \), resulting in the optimized parameters \( \theta^* \).
\end{enumerate}
The proposed approach integrates advanced natural language generation models through knowledge distillation with multi-modal data fusion techniques to improve the accuracy and robustness of CTR models. The methodology is structured to address the unique challenges posed by computational and memory constraints to train LLM in CTR by an end-to-end fashion, as well as the inherent sparsity and variability in the quality of multi-modal data. We aim to demonstrate the potential of combining LLMs with multi-modal data fusion to advance our current best model in CTR prediction tasks, providing a robust and scalable solution for our business system and other sernairo alike.
The process of knowledge distillation is essential in translating the expansive capabilities of LLMs into more efficient and deployable models. Such distilled models are crucial for applications in resource-constrained environments, making advanced language processing accessible and practical. The generation capability of LLMs is a pivotal metric for evaluating their performance.
Given the time and memory constraints, it is most likely not feasible to train LLMs and CTR tasks together. To integrate LLM capabilities into CTR tasks, it is common to use embeddings from LLMs, using items' text descriptions as input features for the CTR model. Fine-tuning on related tasks for better LLM representation is also customary. For example, one can fine-tune an LLM on a query-item relation dataset for search CTR to achieve better performance \cite{REFERENCE}. However, the size of candidate items is commonly in the order of billions. Storing all item embeddings would require an impractical amount of space, given that state-of-the-art LLMs usually output thousand-dimension embedding for each item. To address this, we take the following steps for our base model for comparsion:
\begin{itemize}
\item Perform dimensionality reduction using techniques such as Autoencoder or PCA. These methods are mostly unrelated to the downstream task.
\item Store only a subset of items, typically the top items within the range of tens of millions, to reduce memory consumption.
\end{itemize}
These two strategies are often employed simultaneously to make the combination of LLM and CTR tasks feasible. However, we argue that these commonly used approaches do not fully utilize the potential of LLMs. For users' interaction sequences representation through LLMs, apart from the aforementioned difficulties, feature leakage poses a significant challenge. Given the large number of users, in the order of hundreds of millions, it is impractical to calculate each user's click sequence embedding over a few months due to time and space constraints.
Also the dymanic fusion is used to better ultilize and align the text, image and id features of different modalilties.
To overcome computational complexity, we employ the aforementioned distilled model, which can infer relatively quickly and consume less memory while maintaining most of the original LLM's capacity. This model acts as an embedding generator for both item and user interaction sequences integrated into the existing CTR model. Since this projection layer is trained simultaneously with the CTR task, we argue that it yields better performance.
Given the large number of parameters in the distilled model (in the order of billions), fine-tuning remains impractical. Consequently, we consider using Low-Rank Adaptation (LoRA), a widely used technique to fine-tune LLMs in NLP tasks. By combining these two components, we achieve a method to train the LLM within the CTR task in an end-to-end fashion. With minimal modifications, the LLM sub-module can be integrated into existing CTR training schemas, making end-to-end and real-time training feasible.
For each interaction sequence, the embedding of each item is first randomly masked, and top-
k similar items (using cosine similarity to the target item) are selected for a pooling operation. The pooled embedding and the similarity scores are then used as fine-grained features for the CTR task. Additionally, the embeddings of interaction sequences are projected by an MLP, and the resulting output is used as a feature for the CTR model.
\subsection{Template Parameters}
In addition to specifying the {\itshape template style} to be used in
formatting your work, there are a number of {\itshape template parameters}
which modify some part of the applied template style. A complete list
of these parameters can be found in the {\itshape \LaTeX\ User's Guide.}
Frequently-used parameters, or combinations of parameters, include:
\begin{itemize}
\item {\texttt{anonymous,review}}: Suitable for a ``double-anonymous''
conference submission. Anonymizes the work and includes line
numbers. Use with the \texttt{\acmSubmissionID} command to print the
submission's unique ID on each page of the work.
\item{\texttt{authorversion}}: Produces a version of the work suitable
for posting by the author.
\item{\texttt{screen}}: Produces colored hyperlinks.
\end{itemize}
This document uses the following string as the first command in the
source file:
\begin{verbatim}
\documentclass[sigconf, language=french,
language=german, language=spanish, language=english]{acmart}
\end{verbatim}
\section{Modifications}
Modifying the template --- including but not limited to: adjusting
margins, typeface sizes, line spacing, paragraph and list definitions,
and the use of the \verb|\vspace| command to manually adjust the
vertical spacing between elements of your work --- is not allowed.
{\bfseries Your document will be returned to you for revision if
modifications are discovered.}
\section{Typefaces}
The ``\verb|acmart|'' document class requires the use of the
``Libertine'' typeface family. Your \TeX\ installation should include
this set of packages. Please do not substitute other typefaces. The
``\verb|lmodern|'' and ``\verb|ltimes|'' packages should not be used,
as they will override the built-in typeface families.
\section{Title Information}
The title of your work should use capital letters appropriately -
\url{https://capitalizemytitle.com/} has useful rules for
capitalization. Use the {\verb|title|} command to define the title of
your work. If your work has a subtitle, define it with the
{\verb|subtitle|} command. Do not insert line breaks in your title.
If your title is lengthy, you must define a short version to be used
in the page headers, to prevent overlapping text. The \verb|title|
command has a ``short title'' parameter:
\begin{verbatim}
\title[short title]{full title}
\end{verbatim}
\section{Authors and Affiliations}
Each author must be defined separately for accurate metadata
identification. As an exception, multiple authors may share one
affiliation. Authors' names should not be abbreviated; use full first
names wherever possible. Include authors' e-mail addresses whenever
possible.
Grouping authors' names or e-mail addresses, or providing an ``e-mail
alias,'' as shown below, is not acceptable:
\begin{verbatim}
\author{Brooke Aster, David Mehldau}
\email{dave,judy,steve@university.edu}
\email{firstname.lastname@phillips.org}
\end{verbatim}
The \verb|authornote| and \verb|authornotemark| commands allow a note
to apply to multiple authors --- for example, if the first two authors
of an article contributed equally to the work.
If your author list is lengthy, you must define a shortened version of
the list of authors to be used in the page headers, to prevent
overlapping text. The following command should be placed just after
the last \verb|\author{}| definition:
\begin{verbatim}
\renewcommand{\shortauthors}{McCartney, et al.}
\end{verbatim}
Omitting this command will force the use of a concatenated list of all
of the authors' names, which may result in overlapping text in the
page headers.
The article template's documentation, available at
\url{https://www.acm.org/publications/proceedings-template}, has a
complete explanation of these commands and tips for their effective
use.
Note that authors' addresses are mandatory for journal articles.
\section{Rights Information}
Authors of any work published by ACM will need to complete a rights
form. Depending on the kind of work, and the rights management choice
made by the author, this may be copyright transfer, permission,
license, or an OA (open access) agreement.
Regardless of the rights management choice, the author will receive a
copy of the completed rights form once it has been submitted. This
form contains \LaTeX\ commands that must be copied into the source
document. When the document source is compiled, these commands and
their parameters add formatted text to several areas of the final
document:
\begin{itemize}
\item the ``ACM Reference Format'' text on the first page.
\item the ``rights management'' text on the first page.
\item the conference information in the page header(s).
\end{itemize}
Rights information is unique to the work; if you are preparing several
works for an event, make sure to use the correct set of commands with
each of the works.
The ACM Reference Format text is required for all articles over one
page in length, and is optional for one-page articles (abstracts).
\section{CCS Concepts and User-Defined Keywords}
Two elements of the ``acmart'' document class provide powerful
taxonomic tools for you to help readers find your work in an online
search.
The ACM Computing Classification System ---
\url{https://www.acm.org/publications/class-2012} --- is a set of
classifiers and concepts that describe the computing
discipline. Authors can select entries from this classification
system, via \url{https://dl.acm.org/ccs/ccs.cfm}, and generate the
commands to be included in the \LaTeX\ source.
User-defined keywords are a comma-separated list of words and phrases
of the authors' choosing, providing a more flexible way of describing
the research being presented.
CCS concepts and user-defined keywords are required for for all
articles over two pages in length, and are optional for one- and
two-page articles (or abstracts).
\section{Sectioning Commands}
Your work should use standard \LaTeX\ sectioning commands:
\verb|section|, \verb|subsection|, \verb|subsubsection|, and
\verb|paragraph|. They should be numbered; do not remove the numbering
from the commands.
Simulating a sectioning command by setting the first word or words of
a paragraph in boldface or italicized text is {\bfseries not allowed.}
\section{Tables}
The ``\verb|acmart|'' document class includes the ``\verb|booktabs|''
package --- \url{https://ctan.org/pkg/booktabs} --- for preparing
high-quality tables.
Table captions are placed {\itshape above} the table.
Because tables cannot be split across pages, the best placement for
them is typically the top of the page nearest their initial cite. To
ensure this proper ``floating'' placement of tables, use the
environment \textbf{table} to enclose the table's contents and the
table caption. The contents of the table itself must go in the
\textbf{tabular} environment, to be aligned properly in rows and
columns, with the desired horizontal and vertical rules. Again,
detailed instructions on \textbf{tabular} material are found in the
\textit{\LaTeX\ User's Guide}.
Immediately following this sentence is the point at which
Table~\ref{tab:freq} is included in the input file; compare the
placement of the table here with the table in the printed output of
this document.
\begin{table}
\caption{Frequency of Special Characters}
\label{tab:freq}
\begin{tabular}{ccl}
\toprule
Non-English or Math&Frequency&Comments\\
\midrule
\O & 1 in 1,000& For Swedish names\\
$\pi$ & 1 in 5& Common in math\\
\$ & 4 in 5 & Used in business\\
$\Psi^2_1$ & 1 in 40,000& Unexplained usage\\
\bottomrule
\end{tabular}
\end{table}
To set a wider table, which takes up the whole width of the page's
live area, use the environment \textbf{table*} to enclose the table's
contents and the table caption. As with a single-column table, this
wide table will ``float'' to a location deemed more
desirable. Immediately following this sentence is the point at which
Table~\ref{tab:commands} is included in the input file; again, it is
instructive to compare the placement of the table here with the table
in the printed output of this document.
\begin{table*}
\caption{Some Typical Commands}
\label{tab:commands}
\begin{tabular}{ccl}
\toprule
Command &A Number & Comments\\
\midrule
\texttt{{\char'134}author} & 100& Author \\
\texttt{{\char'134}table}& 300 & For tables\\
\texttt{{\char'134}table*}& 400& For wider tables\\
\bottomrule
\end{tabular}
\end{table*}
Always use midrule to separate table header rows from data rows, and
use it only for this purpose. This enables assistive technologies to
recognise table headers and support their users in navigating tables
more easily.
\section{Math Equations}
You may want to display math equations in three distinct styles:
inline, numbered or non-numbered display. Each of the three are
discussed in the next sections.
\subsection{Inline (In-text) Equations}
A formula that appears in the running text is called an inline or
in-text formula. It is produced by the \textbf{math} environment,
which can be invoked with the usual
\texttt{{\char'134}begin\,\ldots{\char'134}end} construction or with
the short form \texttt{\$\,\ldots\$}. You can use any of the symbols
and structures, from $\alpha$ to $\omega$, available in
\LaTeX~\cite{Lamport:LaTeX}; this section will simply show a few
examples of in-text equations in context. Notice how this equation:
\begin{math}
\lim_{n\rightarrow \infty}x=0
\end{math},
set here in in-line math style, looks slightly different when
set in display style. (See next section).
\subsection{Display Equations}
A numbered display equation---one set off by vertical space from the
text and centered horizontally---is produced by the \textbf{equation}
environment. An unnumbered display equation is produced by the
\textbf{displaymath} environment.
Again, in either environment, you can use any of the symbols and
structures available in \LaTeX\@; this section will just give a couple
of examples of display equations in context. First, consider the
equation, shown as an inline equation above:
\begin{equation}
\lim_{n\rightarrow \infty}x=0
\end{equation}
Notice how it is formatted somewhat differently in
the \textbf{displaymath}
environment. Now, we'll enter an unnumbered equation:
\begin{displaymath}
\sum_{i=0}^{\infty} x + 1
\end{displaymath}
and follow it with another numbered equation:
\begin{equation}
\sum_{i=0}^{\infty}x_i=\int_{0}^{\pi+2} f
\end{equation}
just to demonstrate \LaTeX's able handling of numbering.
\section{Figures}
The ``\verb|figure|'' environment should be used for figures. One or
more images can be placed within a figure. If your figure contains
third-party material, you must clearly identify it as such, as shown
in the example below.
\begin{figure}[h]
\centering
\includegraphics[width=\linewidth]{sample-franklin}
\caption{1907 Franklin Model D roadster. Photograph by Harris \&
Ewing, Inc. [Public domain], via Wikimedia
Commons. (\url{https://goo.gl/VLCRBB}).}
\Description{A woman and a girl in white dresses sit in an open car.}
\end{figure}
Your figures should contain a caption which describes the figure to
the reader.
Figure captions are placed {\itshape below} the figure.
Every figure should also have a figure description unless it is purely
decorative. These descriptions convey what’s in the image to someone
who cannot see it. They are also used by search engine crawlers for
indexing images, and when images cannot be loaded.
A figure description must be unformatted plain text less than 2000
characters long (including spaces). {\bfseries Figure descriptions
should not repeat the figure caption – their purpose is to capture
important information that is not already provided in the caption or
the main text of the paper.} For figures that convey important and
complex new information, a short text description may not be
adequate. More complex alternative descriptions can be placed in an
appendix and referenced in a short figure description. For example,
provide a data table capturing the information in a bar chart, or a
structured list representing a graph. For additional information
regarding how best to write figure descriptions and why doing this is
so important, please see
\url{https://www.acm.org/publications/taps/describing-figures/}.
\subsection{The ``Teaser Figure''}
A ``teaser figure'' is an image, or set of images in one figure, that
are placed after all author and affiliation information, and before
the body of the article, spanning the page. If you wish to have such a
figure in your article, place the command immediately before the
\verb|\maketitle| command:
\begin{verbatim}
\begin{teaserfigure}
\includegraphics[width=\textwidth]{sampleteaser}
\caption{figure caption}
\Description{figure description}
\end{teaserfigure}
\end{verbatim}
\section{Citations and Bibliographies}
The use of \BibTeX\ for the preparation and formatting of one's
references is strongly recommended. Authors' names should be complete
--- use full first names (``Donald E. Knuth'') not initials
(``D. E. Knuth'') --- and the salient identifying features of a
reference should be included: title, year, volume, number, pages,
article DOI, etc.
The bibliography is included in your source document with these two
commands, placed just before the \verb|\end{document}| command:
\begin{verbatim}
\bibliographystyle{ACM-Reference-Format}
\bibliography{bibfile}
\end{verbatim}
where ``\verb|bibfile|'' is the name, without the ``\verb|.bib|''
suffix, of the \BibTeX\ file.
Citations and references are numbered by default. A small number of
ACM publications have citations and references formatted in the
``author year'' style; for these exceptions, please include this
command in the {\bfseries preamble} (before the command
``\verb|\begin{document}|'') of your \LaTeX\ source:
\begin{verbatim}
\citestyle{acmauthoryear}
\end{verbatim}
Some examples. A paginated journal article \cite{Abril07}, an
enumerated journal article \cite{Cohen07}, a reference to an entire
issue \cite{JCohen96}, a monograph (whole book) \cite{Kosiur01}, a
monograph/whole book in a series (see 2a in spec. document)
\cite{Harel79}, a divisible-book such as an anthology or compilation
\cite{Editor00} followed by the same example, however we only output
the series if the volume number is given \cite{Editor00a} (so
Editor00a's series should NOT be present since it has no vol. no.),
a chapter in a divisible book \cite{Spector90}, a chapter in a
divisible book in a series \cite{Douglass98}, a multi-volume work as
book \cite{Knuth97}, a couple of articles in a proceedings (of a
conference, symposium, workshop for example) (paginated proceedings
article) \cite{Andler79, Hagerup1993}, a proceedings article with
all possible elements \cite{Smith10}, an example of an enumerated
proceedings article \cite{VanGundy07}, an informally published work
\cite{Harel78}, a couple of preprints \cite{Bornmann2019,
AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a
master's thesis: \cite{anisi03}, an online document / world wide web
resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game
(Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05}
and (Case 3) a patent \cite{JoeScientist001}, work accepted for
publication \cite{rous08}, 'YYYYb'-test for prolific author
\cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might
contain 'duplicate' DOI and URLs (some SIAM articles)
\cite{Kirschmer:2010:AEI:1958016.1958018}. Boris / Barbara Beeton:
multi-volume works as books \cite{MR781536} and \cite{MR781537}. A
couple of citations with DOIs:
\cite{2004:ITE:1009386.1010128,Kirschmer:2010:AEI:1958016.1958018}. Online
citations: \cite{TUGInstmem, Thornburg01, CTANacmart}.
Artifacts: \cite{R} and \cite{UMassCitations}.
\section{Acknowledgments}
Identification of funding sources and other support, and thanks to
individuals and groups that assisted in the research and the
preparation of the work should be included in an acknowledgment
section, which is placed just before the reference section in your
document.
This section has a special environment:
\begin{verbatim}
\begin{acks}
...
\end{acks}
\end{verbatim}
so that the information contained therein can be more easily collected
during the article metadata extraction phase, and to ensure
consistency in the spelling of the section heading.
Authors should not prepare this section as a numbered or unnumbered {\verb|\section|}; please use the ``{\verb|acks|}'' environment.
\section{Appendices}
If your work needs an appendix, add it before the
``\verb|\end{document}|'' command at the conclusion of your source
document.
Start the appendix with the ``\verb|appendix|'' command:
\begin{verbatim}
\appendix
\end{verbatim}
and note that in the appendix, sections are lettered, not
numbered. This document has two appendices, demonstrating the section
and subsection identification method.
\section{Multi-language papers}
Papers may be written in languages other than English or include
titles, subtitles, keywords and abstracts in different languages (as a
rule, a paper in a language other than English should include an
English title and an English abstract). Use \verb|language=...| for
every language used in the paper. The last language indicated is the
main language of the paper. For example, a French paper with
additional titles and abstracts in English and German may start with
the following command
\begin{verbatim}
\documentclass[sigconf, language=english, language=german,
language=french]{acmart}
\end{verbatim}
The title, subtitle, keywords and abstract will be typeset in the main
language of the paper. The commands \verb|\translatedXXX|, \verb|XXX|
begin title, subtitle and keywords, can be used to set these elements
in the other languages. The environment \verb|translatedabstract| is
used to set the translation of the abstract. These commands and
environment have a mandatory first argument: the language of the
second argument. See \verb|sample-sigconf-i13n.tex| file for examples
of their usage.
\section{SIGCHI Extended Abstracts}
The ``\verb|sigchi-a|'' template style (available only in \LaTeX\ and
not in Word) produces a landscape-orientation formatted article, with
a wide left margin. Three environments are available for use with the
``\verb|sigchi-a|'' template style, and produce formatted output in
the margin:
\begin{description}
\item[\texttt{sidebar}:] Place formatted text in the margin.
\item[\texttt{marginfigure}:] Place a figure in the margin.
\item[\texttt{margintable}:] Place a table in the margin.
\end{description}
%%
%% The acknowledgments section is defined using the "acks" environment
%% (and NOT an unnumbered section). This ensures the proper
%% identification of the section in the article metadata, and the
%% consistent spelling of the heading.
\begin{acks}
To Robert, for the bagels and explaining CMYK and color spaces.
\end{acks}
%%
%% The next two lines define the bibliography style to be used, and
%% the bibliography file.
\bibliographystyle{ACM-Reference-Format}
\bibliography{sample-base}
%%
%% If your work has an appendix, this is the place to put it.
\appendix
\section{Research Methods}
\subsection{Part One}
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi
malesuada, quam in pulvinar varius, metus nunc fermentum urna, id
sollicitudin purus odio sit amet enim. Aliquam ullamcorper eu ipsum
vel mollis. Curabitur quis dictum nisl. Phasellus vel semper risus, et
lacinia dolor. Integer ultricies commodo sem nec semper.
\subsection{Part Two}
Etiam commodo feugiat nisl pulvinar pellentesque. Etiam auctor sodales
ligula, non varius nibh pulvinar semper. Suspendisse nec lectus non
ipsum convallis congue hendrerit vitae sapien. Donec at laoreet
eros. Vivamus non purus placerat, scelerisque diam eu, cursus
ante. Etiam aliquam tortor auctor efficitur mattis.
\section{Online Resources}
Nam id fermentum dui. Suspendisse sagittis tortor a nulla mollis, in
pulvinar ex pretium. Sed interdum orci quis metus euismod, et sagittis
enim maximus. Vestibulum gravida massa ut felis suscipit
congue. Quisque mattis elit a risus ultrices commodo venenatis eget
dui. Etiam sagittis eleifend elementum.
Nam interdum magna at lectus dignissim, ac dignissim lorem
rhoncus. Maecenas eu arcu ac neque placerat aliquam. Nunc pulvinar
massa et mattis lacinia.
\end{document}
\endinput
%%
%% End of file `sample-sigconf-i13n.tex'.
%%
%% This is file `sample-sigconf-lualatex.tex',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% samples.dtx (with options: `all,proceedings,bibtex,sigconf')
%%
%% IMPORTANT NOTICE:
%%
%% For the copyright see the source file.
%%
%% Any modified versions of this file must be renamed
%% with new filenames distinct from sample-sigconf-lualatex.tex.
%%
%% For distribution of the original source see the terms
%% for copying and modification in the file samples.dtx.
%%
%% This generated file may be distributed as long as the
%% original source files, as listed above, are part of the
%% same distribution. (The sources need not necessarily be
%% in the same archive or directory.)
%%
%%
%% Commands for TeXCount
%TC:macro \cite [option:text,text]
%TC:macro \citep [option:text,text]
%TC:macro \citet [option:text,text]
%TC:envir table 0 1
%TC:envir table* 0 1
%TC:envir tabular [ignore] word
%TC:envir displaymath 0 word
%TC:envir math 0 word
%TC:envir comment 0 0
%%
%%
%% The first command in your LaTeX source must be the \documentclass
%% command.
%%
%% For submission and review of your manuscript please change the
%% command to \documentclass[manuscript, screen, review]{acmart}.
%%
%% When submitting camera ready or to TAPS, please change the command
%% to \documentclass[sigconf]{acmart} or whichever template is required
%% for your publication.
%%
%%
\documentclass[sigconf]{acmart}
%%
%% \BibTeX command to typeset BibTeX logo in the docs
\AtBeginDocument{%
\providecommand\BibTeX{{%
Bib\TeX}}}
%% Rights management information. This information is sent to you
%% when you complete the rights form. These commands have SAMPLE
%% values in them; it is your responsibility as an author to replace
%% the commands and values with those provided to you when you
%% complete the rights form.
\setcopyright{acmlicensed}
\copyrightyear{2018}
\acmYear{2018}
\acmDOI{XXXXXXX.XXXXXXX}
%% These commands are for a PROCEEDINGS abstract or paper.
\acmConference[Conference acronym 'XX]{Make sure to enter the correct
conference title from your rights confirmation emai}{June 03--05,
2018}{Woodstock, NY}
%%
%% Uncomment \acmBooktitle if the title of the proceedings is different
%% from ``Proceedings of ...''!
%%
%%\acmBooktitle{Woodstock '18: ACM Symposium on Neural Gaze Detection,
%% June 03--05, 2018, Woodstock, NY}
\acmISBN{978-1-4503-XXXX-X/18/06}
%%
%% Submission ID.
%% Use this when submitting an article to a sponsored event. You'll
%% receive a unique submission ID from the organizers
%% of the event, and this ID should be used as the parameter to this command.
%%\acmSubmissionID{123-A56-BU3}
%%
%% For managing citations, it is recommended to use bibliography
%% files in BibTeX format.
%%
%% You can then either use BibTeX with the ACM-Reference-Format style,
%% or BibLaTeX with the acmnumeric or acmauthoryear sytles, that include
%% support for advanced citation of software artefact from the
%% biblatex-software package, also separately available on CTAN.
%%
%% Look at the sample-*-biblatex.tex files for templates showcasing
%% the biblatex styles.
%%
%%
%% The majority of ACM publications use numbered citations and
%% references. The command \citestyle{authoryear} switches to the
%% "author year" style.
%%
%% If you are preparing content for an event
%% sponsored by ACM SIGGRAPH, you must use the "author year" style of
%% citations and references.
%% Uncommenting
%% the next command will enable that style.
%%\citestyle{acmauthoryear}
%%
%% end of the preamble, start of the body of the document source.
\begin{document}
%%
%% The "title" command has an optional parameter,
%% allowing the author to define a "short title" to be used in page headers.
\title{The Name of the Title Is Hope}
%%
%% The "author" command and its associated commands are used to define
%% the authors and their affiliations.
%% Of note is the shared affiliation of the first two authors, and the
%% "authornote" and "authornotemark" commands
%% used to denote shared contribution to the research.
\author{Ben Trovato}
\authornote{Both authors contributed equally to this research.}
\email{trovato@corporation.com}
\orcid{1234-5678-9012}
\author{G.K.M. Tobin}
\authornotemark[1]
\email{webmaster@marysville-ohio.com}
\affiliation{%
\institution{Institute for Clarity in Documentation}
\city{Dublin}
\state{Ohio}
\country{USA}
}
\author{Lars Th{\o}rv{\"a}ld}
\affiliation{%
\institution{The Th{\o}rv{\"a}ld Group}
\city{Hekla}
\country{Iceland}}
\email{larst@affiliation.org}
\author{Valerie B\'eranger}
\affiliation{%
\institution{Inria Paris-Rocquencourt}
\city{Rocquencourt}
\country{France}
}
\author{Aparna Patel}
\affiliation{%
\institution{Rajiv Gandhi University}
\city{Doimukh}
\state{Arunachal Pradesh}
\country{India}}
\author{Huifen Chan}
\affiliation{%
\institution{Tsinghua University}
\city{Haidian Qu}
\state{Beijing Shi}
\country{China}}
\author{Charles Palmer}
\affiliation{%
\institution{Palmer Research Laboratories}
\city{San Antonio}
\state{Texas}
\country{USA}}
\email{cpalmer@prl.com}
\author{John Smith}
\affiliation{%
\institution{The Th{\o}rv{\"a}ld Group}
\city{Hekla}
\country{Iceland}}
\email{jsmith@affiliation.org}
\author{Julius P. Kumquat}
\affiliation{%
\institution{The Kumquat Consortium}
\city{New York}
\country{USA}}
\email{jpkumquat@consortium.net}
%%
%% By default, the full list of authors will be used in the page
%% headers. Often, this list is too long, and will overlap
%% other information printed in the page headers. This command allows
%% the author to define a more concise list
%% of authors' names for this purpose.
\renewcommand{\shortauthors}{Trovato et al.}
%%
%% The abstract is a short summary of the work to be presented in the
%% article.
\begin{abstract}
A clear and well-documented \LaTeX\ document is presented as an
article formatted for publication by ACM in a conference proceedings
or journal publication. Based on the ``acmart'' document class, this
article presents and explains many of the common variations, as well
as many of the formatting elements an author may use in the
preparation of the documentation of their work.
\end{abstract}
%%
%% The code below is generated by the tool at http://dl.acm.org/ccs.cfm.
%% Please copy and paste the code instead of the example below.
%%
\begin{CCSXML}
<ccs2012>
<concept>
<concept_id>00000000.0000000.0000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>500</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>300</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>100</concept_significance>
</concept>
<concept>
<concept_id>00000000.00000000.00000000</concept_id>
<concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
<concept_significance>100</concept_significance>
</concept>
</ccs2012>
\end{CCSXML}
\ccsdesc[500]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc[300]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc[100]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
%%
%% Keywords. The author(s) should pick words that accurately describe
%% the work being presented. Separate the keywords with commas.
\keywords{Do, Not, Us, This, Code, Put, the, Correct, Terms, for,
Your, Paper}
%% A "teaser" image appears between the author and affiliation
%% information and the body of the document, and typically spans the
%% page.
\begin{teaserfigure}
\includegraphics[width=\textwidth]{sampleteaser}
\caption{Seattle Mariners at Spring Training, 2010.}
\Description{Enjoying the baseball game from the third-base
seats. Ichiro Suzuki preparing to bat.}
\label{fig:teaser}
\end{teaserfigure}
\received{20 February 2007}
\received[revised]{12 March 2009}
\received[accepted]{5 June 2009}
%%
%% This command processes the author and affiliation and title
%% information and builds the first part of the formatted document.
\maketitle
\section{Introduction}
ACM's consolidated article template, introduced in 2017, provides a
consistent \LaTeX\ style for use across ACM publications, and
incorporates accessibility and metadata-extraction functionality
necessary for future Digital Library endeavors. Numerous ACM and
SIG-specific \LaTeX\ templates have been examined, and their unique
features incorporated into this single new template.
If you are new to publishing with ACM, this document is a valuable
guide to the process of preparing your work for publication. If you
have published with ACM before, this document provides insight and
instruction into more recent changes to the article template.
The ``\verb|acmart|'' document class can be used to prepare articles
for any ACM publication --- conference or journal, and for any stage
of publication, from review to final ``camera-ready'' copy, to the
author's own version, with {\itshape very} few changes to the source.
\section{Template Overview}
As noted in the introduction, the ``\verb|acmart|'' document class can
be used to prepare many different kinds of documentation --- a
double-anonymous initial submission of a full-length technical paper, a
two-page SIGGRAPH Emerging Technologies abstract, a ``camera-ready''
journal article, a SIGCHI Extended Abstract, and more --- all by
selecting the appropriate {\itshape template style} and {\itshape
template parameters}.
This document will explain the major features of the document
class. For further information, the {\itshape \LaTeX\ User's Guide} is
available from
\url{https://www.acm.org/publications/proceedings-template}.
\subsection{Template Styles}
The primary parameter given to the ``\verb|acmart|'' document class is
the {\itshape template style} which corresponds to the kind of publication
or SIG publishing the work. This parameter is enclosed in square
brackets and is a part of the {\verb|documentclass|} command:
\begin{verbatim}
\documentclass[STYLE]{acmart}
\end{verbatim}
Journals use one of three template styles. All but three ACM journals
use the {\verb|acmsmall|} template style:
\begin{itemize}
\item {\texttt{acmsmall}}: The default journal template style.
\item {\texttt{acmlarge}}: Used by JOCCH and TAP.
\item {\texttt{acmtog}}: Used by TOG.
\end{itemize}
The majority of conference proceedings documentation will use the {\verb|acmconf|} template style.
\begin{itemize}
\item {\texttt{sigconf}}: The default proceedings template style.
\item{\texttt{sigchi}}: Used for SIGCHI conference articles.
\item{\texttt{sigplan}}: Used for SIGPLAN conference articles.
\end{itemize}
\subsection{Template Parameters}
In addition to specifying the {\itshape template style} to be used in
formatting your work, there are a number of {\itshape template parameters}
which modify some part of the applied template style. A complete list
of these parameters can be found in the {\itshape \LaTeX\ User's Guide.}
Frequently-used parameters, or combinations of parameters, include:
\begin{itemize}
\item {\texttt{anonymous,review}}: Suitable for a ``double-anonymous''
conference submission. Anonymizes the work and includes line
numbers. Use with the \texttt{\acmSubmissionID} command to print the
submission's unique ID on each page of the work.
\item{\texttt{authorversion}}: Produces a version of the work suitable
for posting by the author.
\item{\texttt{screen}}: Produces colored hyperlinks.
\end{itemize}
This document uses the following string as the first command in the
source file:
\begin{verbatim}
\documentclass[sigconf]{acmart}
\end{verbatim}
\section{Modifications}
Modifying the template --- including but not limited to: adjusting
margins, typeface sizes, line spacing, paragraph and list definitions,
and the use of the \verb|\vspace| command to manually adjust the
vertical spacing between elements of your work --- is not allowed.
{\bfseries Your document will be returned to you for revision if
modifications are discovered.}
\section{Typefaces}
The ``\verb|acmart|'' document class requires the use of the
``Libertine'' typeface family. Your \TeX\ installation should include
this set of packages. Please do not substitute other typefaces. The
``\verb|lmodern|'' and ``\verb|ltimes|'' packages should not be used,
as they will override the built-in typeface families.
\section{Title Information}
The title of your work should use capital letters appropriately -
\url{https://capitalizemytitle.com/} has useful rules for
capitalization. Use the {\verb|title|} command to define the title of
your work. If your work has a subtitle, define it with the
{\verb|subtitle|} command. Do not insert line breaks in your title.
If your title is lengthy, you must define a short version to be used
in the page headers, to prevent overlapping text. The \verb|title|
command has a ``short title'' parameter:
\begin{verbatim}
\title[short title]{full title}
\end{verbatim}
\section{Authors and Affiliations}
Each author must be defined separately for accurate metadata
identification. As an exception, multiple authors may share one
affiliation. Authors' names should not be abbreviated; use full first
names wherever possible. Include authors' e-mail addresses whenever
possible.
Grouping authors' names or e-mail addresses, or providing an ``e-mail
alias,'' as shown below, is not acceptable:
\begin{verbatim}
\author{Brooke Aster, David Mehldau}
\email{dave,judy,steve@university.edu}
\email{firstname.lastname@phillips.org}
\end{verbatim}
The \verb|authornote| and \verb|authornotemark| commands allow a note
to apply to multiple authors --- for example, if the first two authors
of an article contributed equally to the work.
If your author list is lengthy, you must define a shortened version of
the list of authors to be used in the page headers, to prevent
overlapping text. The following command should be placed just after
the last \verb|\author{}| definition:
\begin{verbatim}
\renewcommand{\shortauthors}{McCartney, et al.}
\end{verbatim}
Omitting this command will force the use of a concatenated list of all
of the authors' names, which may result in overlapping text in the
page headers.
The article template's documentation, available at
\url{https://www.acm.org/publications/proceedings-template}, has a
complete explanation of these commands and tips for their effective
use.
Note that authors' addresses are mandatory for journal articles.
\section{Rights Information}
Authors of any work published by ACM will need to complete a rights
form. Depending on the kind of work, and the rights management choice
made by the author, this may be copyright transfer, permission,
license, or an OA (open access) agreement.
Regardless of the rights management choice, the author will receive a
copy of the completed rights form once it has been submitted. This
form contains \LaTeX\ commands that must be copied into the source
document. When the document source is compiled, these commands and
their parameters add formatted text to several areas of the final
document:
\begin{itemize}
\item the ``ACM Reference Format'' text on the first page.
\item the ``rights management'' text on the first page.
\item the conference information in the page header(s).
\end{itemize}
Rights information is unique to the work; if you are preparing several
works for an event, make sure to use the correct set of commands with
each of the works.
The ACM Reference Format text is required for all articles over one
page in length, and is optional for one-page articles (abstracts).
\section{CCS Concepts and User-Defined Keywords}
Two elements of the ``acmart'' document class provide powerful
taxonomic tools for you to help readers find your work in an online
search.
The ACM Computing Classification System ---
\url{https://www.acm.org/publications/class-2012} --- is a set of
classifiers and concepts that describe the computing
discipline. Authors can select entries from this classification
system, via \url{https://dl.acm.org/ccs/ccs.cfm}, and generate the
commands to be included in the \LaTeX\ source.
User-defined keywords are a comma-separated list of words and phrases
of the authors' choosing, providing a more flexible way of describing
the research being presented.
CCS concepts and user-defined keywords are required for for all
articles over two pages in length, and are optional for one- and
two-page articles (or abstracts).
\section{Sectioning Commands}
Your work should use standard \LaTeX\ sectioning commands:
\verb|section|, \verb|subsection|, \verb|subsubsection|, and
\verb|paragraph|. They should be numbered; do not remove the numbering
from the commands.
Simulating a sectioning command by setting the first word or words of
a paragraph in boldface or italicized text is {\bfseries not allowed.}
\section{Tables}
The ``\verb|acmart|'' document class includes the ``\verb|booktabs|''
package --- \url{https://ctan.org/pkg/booktabs} --- for preparing
high-quality tables.
Table captions are placed {\itshape above} the table.
Because tables cannot be split across pages, the best placement for
them is typically the top of the page nearest their initial cite. To
ensure this proper ``floating'' placement of tables, use the
environment \textbf{table} to enclose the table's contents and the
table caption. The contents of the table itself must go in the
\textbf{tabular} environment, to be aligned properly in rows and
columns, with the desired horizontal and vertical rules. Again,
detailed instructions on \textbf{tabular} material are found in the
\textit{\LaTeX\ User's Guide}.
Immediately following this sentence is the point at which
Table~\ref{tab:freq} is included in the input file; compare the
placement of the table here with the table in the printed output of
this document.
\begin{table}
\caption{Frequency of Special Characters}
\label{tab:freq}
\begin{tabular}{ccl}
\toprule
Non-English or Math&Frequency&Comments\\
\midrule
\O & 1 in 1,000& For Swedish names\\
$\pi$ & 1 in 5& Common in math\\
\$ & 4 in 5 & Used in business\\
$\Psi^2_1$ & 1 in 40,000& Unexplained usage\\
\bottomrule
\end{tabular}
\end{table}
To set a wider table, which takes up the whole width of the page's
live area, use the environment \textbf{table*} to enclose the table's
contents and the table caption. As with a single-column table, this
wide table will ``float'' to a location deemed more
desirable. Immediately following this sentence is the point at which
Table~\ref{tab:commands} is included in the input file; again, it is
instructive to compare the placement of the table here with the table
in the printed output of this document.
\begin{table*}
\caption{Some Typical Commands}
\label{tab:commands}
\begin{tabular}{ccl}
\toprule
Command &A Number & Comments\\
\midrule
\texttt{{\char'134}author} & 100& Author \\
\texttt{{\char'134}table}& 300 & For tables\\
\texttt{{\char'134}table*}& 400& For wider tables\\
\bottomrule
\end{tabular}
\end{table*}
Always use midrule to separate table header rows from data rows, and
use it only for this purpose. This enables assistive technologies to
recognise table headers and support their users in navigating tables
more easily.
\section{Math Equations}
You may want to display math equations in three distinct styles:
inline, numbered or non-numbered display. Each of the three are
discussed in the next sections.
\subsection{Inline (In-text) Equations}
A formula that appears in the running text is called an inline or
in-text formula. It is produced by the \textbf{math} environment,
which can be invoked with the usual
\texttt{{\char'134}begin\,\ldots{\char'134}end} construction or with
the short form \texttt{\$\,\ldots\$}. You can use any of the symbols
and structures, from $\alpha$ to $\omega$, available in
\LaTeX~\cite{Lamport:LaTeX}; this section will simply show a few
examples of in-text equations in context. Notice how this equation:
\begin{math}
\lim_{n\rightarrow \infty}x=0
\end{math},
set here in in-line math style, looks slightly different when
set in display style. (See next section).
\subsection{Display Equations}
A numbered display equation---one set off by vertical space from the
text and centered horizontally---is produced by the \textbf{equation}
environment. An unnumbered display equation is produced by the
\textbf{displaymath} environment.
Again, in either environment, you can use any of the symbols and
structures available in \LaTeX\@; this section will just give a couple
of examples of display equations in context. First, consider the
equation, shown as an inline equation above:
\begin{equation}
\lim_{n\rightarrow \infty}x=0
\end{equation}
Notice how it is formatted somewhat differently in
the \textbf{displaymath}
environment. Now, we'll enter an unnumbered equation:
\begin{displaymath}
\sum_{i=0}^{\infty} x + 1
\end{displaymath}
and follow it with another numbered equation:
\begin{equation}
\sum_{i=0}^{\infty}x_i=\int_{0}^{\pi+2} f
\end{equation}
just to demonstrate \LaTeX's able handling of numbering.
\section{Figures}
The ``\verb|figure|'' environment should be used for figures. One or
more images can be placed within a figure. If your figure contains
third-party material, you must clearly identify it as such, as shown
in the example below.
\begin{figure}[h]
\centering
\includegraphics[width=\linewidth]{sample-franklin}
\caption{1907 Franklin Model D roadster. Photograph by Harris \&
Ewing, Inc. [Public domain], via Wikimedia
Commons. (\url{https://goo.gl/VLCRBB}).}
\Description{A woman and a girl in white dresses sit in an open car.}
\end{figure}
Your figures should contain a caption which describes the figure to
the reader.
Figure captions are placed {\itshape below} the figure.
Every figure should also have a figure description unless it is purely
decorative. These descriptions convey what’s in the image to someone
who cannot see it. They are also used by search engine crawlers for
indexing images, and when images cannot be loaded.
A figure description must be unformatted plain text less than 2000
characters long (including spaces). {\bfseries Figure descriptions
should not repeat the figure caption – their purpose is to capture
important information that is not already provided in the caption or
the main text of the paper.} For figures that convey important and
complex new information, a short text description may not be
adequate. More complex alternative descriptions can be placed in an
appendix and referenced in a short figure description. For example,
provide a data table capturing the information in a bar chart, or a
structured list representing a graph. For additional information
regarding how best to write figure descriptions and why doing this is
so important, please see
\url{https://www.acm.org/publications/taps/describing-figures/}.
\subsection{The ``Teaser Figure''}
A ``teaser figure'' is an image, or set of images in one figure, that
are placed after all author and affiliation information, and before
the body of the article, spanning the page. If you wish to have such a
figure in your article, place the command immediately before the
\verb|\maketitle| command:
\begin{verbatim}
\begin{teaserfigure}
\includegraphics[width=\textwidth]{sampleteaser}
\caption{figure caption}
\Description{figure description}
\end{teaserfigure}
\end{verbatim}
\section{Citations and Bibliographies}
The use of \BibTeX\ for the preparation and formatting of one's
references is strongly recommended. Authors' names should be complete
--- use full first names (``Donald E. Knuth'') not initials
(``D. E. Knuth'') --- and the salient identifying features of a
reference should be included: title, year, volume, number, pages,
article DOI, etc.
The bibliography is included in your source document with these two
commands, placed just before the \verb|\end{document}| command:
\begin{verbatim}
\bibliographystyle{ACM-Reference-Format}
\bibliography{bibfile}
\end{verbatim}
where ``\verb|bibfile|'' is the name, without the ``\verb|.bib|''
suffix, of the \BibTeX\ file.
Citations and references are numbered by default. A small number of
ACM publications have citations and references formatted in the
``author year'' style; for these exceptions, please include this
command in the {\bfseries preamble} (before the command
``\verb|\begin{document}|'') of your \LaTeX\ source:
\begin{verbatim}
\citestyle{acmauthoryear}
\end{verbatim}
Some examples. A paginated journal article \cite{Abril07}, an
enumerated journal article \cite{Cohen07}, a reference to an entire
issue \cite{JCohen96}, a monograph (whole book) \cite{Kosiur01}, a
monograph/whole book in a series (see 2a in spec. document)
\cite{Harel79}, a divisible-book such as an anthology or compilation
\cite{Editor00} followed by the same example, however we only output
the series if the volume number is given \cite{Editor00a} (so
Editor00a's series should NOT be present since it has no vol. no.),
a chapter in a divisible book \cite{Spector90}, a chapter in a
divisible book in a series \cite{Douglass98}, a multi-volume work as
book \cite{Knuth97}, a couple of articles in a proceedings (of a
conference, symposium, workshop for example) (paginated proceedings
article) \cite{Andler79, Hagerup1993}, a proceedings article with
all possible elements \cite{Smith10}, an example of an enumerated
proceedings article \cite{VanGundy07}, an informally published work
\cite{Harel78}, a couple of preprints \cite{Bornmann2019,
AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a
master's thesis: \cite{anisi03}, an online document / world wide web
resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game
(Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05}
and (Case 3) a patent \cite{JoeScientist001}, work accepted for
publication \cite{rous08}, 'YYYYb'-test for prolific author
\cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might
contain 'duplicate' DOI and URLs (some SIAM articles)
\cite{Kirschmer:2010:AEI:1958016.1958018}. Boris / Barbara Beeton:
multi-volume works as books \cite{MR781536} and \cite{MR781537}. A
couple of citations with DOIs:
\cite{2004:ITE:1009386.1010128,Kirschmer:2010:AEI:1958016.1958018}. Online
citations: \cite{TUGInstmem, Thornburg01, CTANacmart}.
Artifacts: \cite{R} and \cite{UMassCitations}.
\section{Acknowledgments}
Identification of funding sources and other support, and thanks to
individuals and groups that assisted in the research and the
preparation of the work should be included in an acknowledgment
section, which is placed just before the reference section in your
document.
This section has a special environment:
\begin{verbatim}
\begin{acks}
...
\end{acks}
\end{verbatim}
so that the information contained therein can be more easily collected
during the article metadata extraction phase, and to ensure
consistency in the spelling of the section heading.
Authors should not prepare this section as a numbered or unnumbered {\verb|\section|}; please use the ``{\verb|acks|}'' environment.
\section{Appendices}
If your work needs an appendix, add it before the
``\verb|\end{document}|'' command at the conclusion of your source
document.
Start the appendix with the ``\verb|appendix|'' command:
\begin{verbatim}
\appendix
\end{verbatim}
and note that in the appendix, sections are lettered, not
numbered. This document has two appendices, demonstrating the section
and subsection identification method.
\section{Multi-language papers}
Papers may be written in languages other than English or include
titles, subtitles, keywords and abstracts in different languages (as a
rule, a paper in a language other than English should include an
English title and an English abstract). Use \verb|language=...| for
every language used in the paper. The last language indicated is the
main language of the paper. For example, a French paper with
additional titles and abstracts in English and German may start with
the following command
\begin{verbatim}
\documentclass[sigconf, language=english, language=german,
language=french]{acmart}
\end{verbatim}
The title, subtitle, keywords and abstract will be typeset in the main
language of the paper. The commands \verb|\translatedXXX|, \verb|XXX|
begin title, subtitle and keywords, can be used to set these elements
in the other languages. The environment \verb|translatedabstract| is
used to set the translation of the abstract. These commands and
environment have a mandatory first argument: the language of the
second argument. See \verb|sample-sigconf-i13n.tex| file for examples
of their usage.
\section{SIGCHI Extended Abstracts}
The ``\verb|sigchi-a|'' template style (available only in \LaTeX\ and
not in Word) produces a landscape-orientation formatted article, with
a wide left margin. Three environments are available for use with the
``\verb|sigchi-a|'' template style, and produce formatted output in
the margin:
\begin{description}
\item[\texttt{sidebar}:] Place formatted text in the margin.
\item[\texttt{marginfigure}:] Place a figure in the margin.
\item[\texttt{margintable}:] Place a table in the margin.
\end{description}
%%
%% The acknowledgments section is defined using the "acks" environment
%% (and NOT an unnumbered section). This ensures the proper
%% identification of the section in the article metadata, and the
%% consistent spelling of the heading.
\begin{acks}
To Robert, for the bagels and explaining CMYK and color spaces.
\end{acks}
%%
%% The next two lines define the bibliography style to be used, and
%% the bibliography file.
\bibliographystyle{ACM-Reference-Format}
\bibliography{sample-base}
%%
%% If your work has an appendix, this is the place to put it.
\appendix
\section{Research Methods}
\subsection{Part One}
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi
malesuada, quam in pulvinar varius, metus nunc fermentum urna, id
sollicitudin purus odio sit amet enim. Aliquam ullamcorper eu ipsum
vel mollis. Curabitur quis dictum nisl. Phasellus vel semper risus, et
lacinia dolor. Integer ultricies commodo sem nec semper.
\subsection{Part Two}
Etiam commodo feugiat nisl pulvinar pellentesque. Etiam auctor sodales
ligula, non varius nibh pulvinar semper. Suspendisse nec lectus non
ipsum convallis congue hendrerit vitae sapien. Donec at laoreet
eros. Vivamus non purus placerat, scelerisque diam eu, cursus
ante. Etiam aliquam tortor auctor efficitur mattis.
\section{Online Resources}
Nam id fermentum dui. Suspendisse sagittis tortor a nulla mollis, in
pulvinar ex pretium. Sed interdum orci quis metus euismod, et sagittis
enim maximus. Vestibulum gravida massa ut felis suscipit
congue. Quisque mattis elit a risus ultrices commodo venenatis eget
dui. Etiam sagittis eleifend elementum.
Nam interdum magna at lectus dignissim, ac dignissim lorem
rhoncus. Maecenas eu arcu ac neque placerat aliquam. Nunc pulvinar
massa et mattis lacinia.
\end{document}
\endinput
%%
%% End of file `sample-sigconf-lualatex.tex'.
%%
%% This is file `sample-sigconf.tex',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% samples.dtx (with options: `all,proceedings,bibtex,sigconf')
%%
%% IMPORTANT NOTICE:
%%
%% For the copyright see the source file.
%%
%% Any modified versions of this file must be renamed
%% with new filenames distinct from sample-sigconf.tex.
%%
%% For distribution of the original source see the terms
%% for copying and modification in the file samples.dtx.
%%
%% This generated file may be distributed as long as the
%% original source files, as listed above, are part of the
%% same distribution. (The sources need not necessarily be
%% in the same archive or directory.)
%%
%%
%% Commands for TeXCount
%TC:macro \cite [option:text,text]
%TC:macro \citep [option:text,text]
%TC:macro \citet [option:text,text]
%TC:envir table 0 1
%TC:envir table* 0 1
%TC:envir tabular [ignore] word
%TC:envir displaymath 0 word
%TC:envir math 0 word
%TC:envir comment 0 0
%%
%%
%% The first command in your LaTeX source must be the \documentclass
%% command.
%%
%% For submission and review of your manuscript please change the
%% command to \documentclass[manuscript, screen, review]{acmart}.
%%
%% When submitting camera ready or to TAPS, please change the command
%% to \documentclass[sigconf]{acmart} or whichever template is required
%% for your publication.
%%
%%
%\documentclass[sigconf,review]{acmart}
\documentclass[sigconf]{acmart}
\usepackage{algorithm}
\usepackage{algpseudocode}
\usepackage{tabu}
\usepackage{array}
%%
%% \BibTeX command to typeset BibTeX logo in the docs
\AtBeginDocument{%
\providecommand\BibTeX{{%
Bib\TeX}}}
%% Rights management information. This information is sent to you
%% when you complete the rights form. These commands have SAMPLE
%% values in them; it is your responsibility as an author to replace
%% the commands and values with those provided to you when you
%% complete the rights form.
\copyrightyear{2025}
\acmYear{2025}
\setcopyright{acmlicensed}\acmConference[WWW Companion '25]{Companion Proceedings of the ACM Web Conference 2025}{April 28-May 2, 2025}{Sydney, NSW, Australia}
\acmBooktitle{Companion Proceedings of the ACM Web Conference 2025 (WWW Companion '25), April 28-May 2, 2025, Sydney, NSW, Australia}
\acmDOI{10.1145/3701716.3715211}
\acmISBN{979-8-4007-1331-6/2025/04}
%%
%% Submission ID.
%% Use this when submitting an article to a sponsored event. You'll
%% receive a unique submission ID from the organizers
%% of the event, and this ID should be used as the parameter to this command.
%%\acmSubmissionID{123-A56-BU3}
%%
%% For managing citations, it is recommended to use bibliography
%% files in BibTeX format.
%%
%% You can then either use BibTeX with the ACM-Reference-Format style,
%% or BibLaTeX with the acmnumeric or acmauthoryear sytles, that include
%% support for advanced citation of software artefact from the
%% biblatex-software package, also separately available on CTAN.
%%
%% Look at the sample-*-biblatex.tex files for templates showcasing
%% the biblatex styles.
%%
%%
%% The majority of ACM publications use numbered citations and
%% references. The command \citestyle{authoryear} switches to the
%% "author year" style.
%%
%% If you are preparing content for an event
%% sponsored by ACM SIGGRAPH, you must use the "author year" style of
%% citations and references.
%% Uncommenting
%% the next command will enable that style.
%%\citestyle{acmauthoryear}
%%
%% end of the preamble, start of the body of the document source.
\begin{document}
%%
%% The "title" command has an optional parameter,
%% allowing the author to define a "short title" to be used in page headers.
\title{Balancing Efficiency and Effectiveness: An LLM-Infused Approach for Optimized CTR Prediction}
%%
%% The "author" command and its associated commands are used to define
%% the authors and their affiliations.
%% Of note is the shared affiliation of the first two authors, and the
%% "authornote" and "authornotemark" commands
%% used to denote shared contribution to the research.
\author{Guoxiao Zhang}
\authornote{Both authors contributed equally to this research.}
\email{zhangguoxiao@meituan.com}
\orcid{0009-0004-2628-7094}
\author{Yi Wei}
\authornotemark[1]
\email{weiyi20@meituan.com}
\affiliation{%
\institution{Meituan}
\city{Beijing}
\country{China}
}
\author{Yadong Zhang}
\affiliation{%
\institution{Meituan}
\city{Beijing}
\country{China}}
\email{zhangyadong05@meituan.com}
\author{Huajian Feng}
\affiliation{%
\institution{Hunan University}
\city{Changsha}
\country{China}}
\email{huajianfeng@hnu.edu.cn}
\author{Qiang Liu}
\affiliation{%
\institution{Meituan}
\city{Beijing}
\country{China}}
\email{liuqiang43@meituan.com}
%%
%% By default, the full list of authors will be used in the page
%% headers. Often, this list is too long, and will overlap
%% other information printed in the page headers. This command allows
%% the author to define a more concise list
%% of authors' names for this purpose.
\renewcommand{\shortauthors}{Guoxiao Zhang, Yi Wei, Yadong Zhang, Huajian Feng, and Qiang Liu}
%% No italics, no superscripts
%% Use footnote or author note to identify equal contribution and/or contact author info
%%
%% The abstract is a short summary of the work to be presented in the
%% article.
\begin{abstract}
Click-Through Rate (CTR) prediction is essential in online advertising, where semantic information plays a pivotal role in shaping user decisions and enhancing CTR effectiveness. Capturing and modeling deep semantic information, such as a user's preference for "Häagen-Dazs' HEAVEN strawberry light ice cream" due to its health-conscious and premium attributes, is challenging. Traditional semantic modeling often overlooks these intricate details at the user and item levels. To bridge this gap, we introduce a novel approach that models deep semantic information end-to-end, leveraging the comprehensive world knowledge capabilities of Large Language Models (LLMs). Our proposed LLM-infused CTR prediction framework(\textbf{M}ulti-level Deep \textbf{S}emantic Information Infused CTR model via \textbf{D}istillation, MSD) is designed to uncover deep semantic insights by utilizing LLMs to extract and distill critical information into a smaller, more efficient model, enabling seamless end-to-end training and inference. Importantly, our framework is carefully designed to balance efficiency and effectiveness, ensuring that the model not only achieves high performance but also operates with optimal resource utilization. Online A/B tests conducted on the Meituan sponsored-search system demonstrate that our method significantly outperforms baseline models in terms of Cost Per Mile (CPM) and CTR, validating its effectiveness, scalability, and balanced approach in real-world applications.
\end{abstract}
%%
%% The code below is generated by the tool at http://dl.acm.org/ccs.cfm.
%% Please copy and paste the code instead of the example below.
%%
\begin{CCSXML}
<ccs2012>
<concept>
<concept_id>00000000.0000000.0000000</concept_id>
<concept_desc>Information systems</concept_desc>
<concept_significance>500</concept_significance>
</concept>
</ccs2012>
\end{CCSXML}
\ccsdesc[500]{Information systems~Information retrieval}
%%
%% Keywords. The author(s) should pick words that accurately describe
%% the work being presented. Separate the keywords with commas.
\keywords{CTR Prediction, Knowledge Distillation, LLMs, Recommendation Systems}
%%
%% This command processes the author and affiliation and title
%% information and builds the first part of the formatted document.
\maketitle
\section{Introduction}
Click-Through Rate (CTR) prediction plays an important role in recommender systems and online advertising \cite{guo2017deepfm,zhou2018deep,gligorijevic2019deeply,bian2020can,pi2020search,wang2022learning,hong2024print}. Lately, some works are proposed to capture semantic information by involving Pretrained Language Models (PLMs) \cite{wang2022learning,wang2023bert4ctr,yang2023practice,li2023ctrl,lin2024clickprompt,xi2024towards,geng2024breaking}. As is shown in Figure \ref{fig:infer}, semantic information can be categorized as explicit information and implicit information, where explicit information is directly obtainable from the texture features and implicit information is inferred by relevant world knowledge.
Compared with those works of BERT series \cite{wang2022learning,wang2023bert4ctr,yang2023practice}, generative Large Language Models (LLMs) provide a fresh technological approach for recommender systems to capture deep semantic information\cite{li2023ctrl,lin2024clickprompt,xi2024towards,geng2024breaking}, due to their capacity for leveraging world knowledge to infer implicit information. Specifically, CTRL\cite{li2023ctrl} integrates semantic information from LLMs into traditional ID-based models using contrastive learning. ClickPrompt \cite{lin2024clickprompt} first aligns the collaborative and semantic knowledge from ID and textual features via the prompt interface, then tunes the CTR model without PLM for inference efficiency. KAR \cite{xi2024towards} acquires two types of external knowledge from LLMs—the reasoning knowledge on user preferences and the factual knowledge on items, which are transformed into augmented vectors to be compatible with the recommendation task. BAHE\cite{geng2024breaking} employs the LLM’s pre-trained low layers to extract embeddings of user behaviors and stores them in the offline database, then utilizes the deeper, trainable layers of the LLM to generate comprehensive user embeddings. However, it is important to note that, due to limited consideration of efficiency, most of these studies(ClickPrompt\cite{lin2024clickprompt}, KAR \cite{xi2024towards}, CTRL\cite{li2023ctrl}) remain largely experimental and have not been applied in practical industrial settings for CTR prediction. Besides, BAHE\cite{geng2024breaking} chooses to partially utilize information from LLMs, which restricts the exploration of the effectiveness of LLMs for CTR estimation.
\begin{figure}[ht]
\centering
\includegraphics[width=\linewidth]{infer.pdf}
\caption{Semantic information at both item and user levels: explicit and implicit key features with corresponding reasoning processes extracted by LLMs.}
\label{fig:infer}
\end{figure}
To balance efficiency and effectiveness, inspired by the fact Knowledge distillation is an effective model compression method that can transfer the internal capabilities of LLMs to smaller ones\cite{gu2024minillm}, we propose an LLM-infused approach via Knowledge Distillation. Specifically, our approach includes the Multi-level Knowledge Distillation Module(MKDM) and Multi-level Knowledge Integration Module(MKIM). For MKDM, we propose a prompt-based approach combined with Chain-of-Thought (CoT) reasoning to generate reasoning processes and extract both explicit and implicit information at both item and user levels, shown in Figure \ref{fig:infer}. The MIDM comprises three components. Initially, we incorporate a feature adaptation layer to map the semantic embeddings into the appropriate feature space. Subsequently, we employ LoRA (Low-Rank Adaptation) to fine-tune the parameters of the LLM. Finally, we develop a Frequency-Adaptive k-Near Items Fusion to enhance integration with the CTR model.
Our contributions include:
\begin{itemize}
\item Introducing an LLM-infused CTR Prediction Approach through Knowledge Distillation Paradigm to balance efficiency and effectiveness.
\item Developing Multi-level Knowledge Distillation Module and Multi-level Knowledge Integration Module.
\item Successfully deploying this method on the Meituan Recommendation platform, achieving a 2.12\% rise in CTR and a 2.59\% enhancement in Cost Per Mile (CPM) during online A/B tests.
\end{itemize}
\section{Methodology}
\begin{figure}[ht]
\centering
\includegraphics[width=\linewidth]{framework.pdf}
\caption{The overall framework of our proposed LLM-infused CTR prediction framework(MSD).}
\label{fig:framework}
\end{figure}
In this section, we present our framework, depicted in Figure \ref{fig:framework}, which consists of two main modules: the Multi-level Knowledge Distillation Module and the Multi-level Knowledge Integration Module. We first introduce the process of distilling LLMs at both item and user levels, followed by integrating the distilled model into the CTR prediction framework.
\subsection{Multi-level Knowledge Distillation Module}
This module is designed to efficiently distill semantic knowledge at both item and user levels from LLMs into a more efficient one. Knowledge generation and knowledge distillation are the main components of this module. We provide a detailed description of them in this section.
\subsubsection{Knowledge Generation}
High-quality and diverse data are essential to ensure that the distilled model generalizes well across different contexts and retains critical semantic information. To guide the LLMs produce high-quality data, we first manually selected outputs from the ChatGPT as reference, which include key phrases and the rationale. Then, the prompt will be enhanced by dynamically chosen reference output as an example for in-context learning\cite{d2024dynamic}. Our prompt template for item level is illustrated in Figure \ref{fig:cot_few_shot_prompt}. To ensure the dataset is representative and diverse, stratified and importance sampling are adopted, considering categorical information and posterior statistics. For user level data, the generation procedure follows a similar protocol.
\begin{figure}[ht]
\centering
\includegraphics[width=\linewidth]{cot_few_shot_prompt.pdf}
\caption{Item Level Prompt templates guide the LLM in generating outputs containing explicit (highlighted in green) and implicit (highlighted in blue) information, utilizing in-context learning.}
\label{fig:cot_few_shot_prompt}
\end{figure}
\subsubsection{Knowledge Distillation}
Following \cite{wang2024can}, we leverage knowledge distillation to transfer semantic and contextual reasoning capabilities from the LLMs teacher model \( T \) to a more computationally efficient student model \( S \). The student model is trained to replicate the output \( y_T \) of the teacher model by minimizing the distillation loss as follows:
\begin{equation}
\mathcal{L}_{\text{distill}} = \sum_{t=1}^{|\mathbf{y}_T|} \log \left( P_{\theta} \left( \mathbf{y}_{T,t} \mid \mathbf{y}_{S,<t}, \mathbf{x} \right) \right),
\end{equation}
\begin{equation}
S^* = \arg \min_{S} \mathcal{L}_{\text{distill}}
\end{equation}
where \( \mathbf{y}_{T,t} \) represents the \( t \)-th token of the teacher model's output sequence, \( \mathbf{y}_{S,<t} \) are the preceding tokens in the student model's output sequence and \(\mathbf{x}\) are the input tokens.
\subsection{Multi-level Knowledge Integration Module}
The MKIM is designed to seamlessly integrate semantic insights at both the item and user levels within the CTR prediction framework. It comprises three key components: 1) LoRA, which enhances alignment and performance by fine-tuning distilled LLMs with Low-Rank Adaptors for computational efficiency; 2) Feature Adaptors, which compress and transform LLM output embeddings using a Multi-Layer Perceptron (MLP) to ensure effective integration into the CTR model; 3) Frequency-Adaptive Relevant Items Fusion, which improves item embedding robustness through masking and pooling operations. The transformed item and user embeddings are then concatenated to form the input for CTR tasks.
\subsubsection{LoRA}
Following \cite{hu2021lora}, we finetune the distilled LLMs for CTR tasks using Low-Rank adaptors. Specifically, for a pre-trained weight matrix $\mathbf{W}_0 \in \mathbb{R}^{d\times k}$, we constrain its update by representing the latter with a low-rank decomposition $\mathbf{W_0} + \Delta \mathbf{W} = \mathbf{B} \mathbf{A}$, where $\mathbf{B} \in \mathbb{R}^{d\times r}$, $\mathbf{A} \in \mathbb{R}^{r\times k}$, and the rank $r \ll \min(d, k)$. During training, $\mathbf{W}_0$ is frozen and does not receive gradients, while the $\mathbf{A}$ and $\mathbf{B}$ contain trainable parameters.
\subsubsection{Feature Adaptors}
For the raw output embeddings of the LLMs, we define \(\mathbf{e}_{\text{u}}\) as the user-level embedding, \(L \) as the length of user behavior sequence, \(\mathbf{e}_{\text{t}}\) as the target item embedding and \(\mathbf{e}_{\text{i}}\) as the item embeddings in user behavior sequence, where \(i\) ranges from 1 to \(L\). We apply a Multi-Layer Perceptron (MLP) as the feature adaptor to generate the projected embeddings \(\mathbf{e}^{\prime}_{\text{u}}\), \(\mathbf{e}^{\prime}_{\text{t}}\) and \(\mathbf{e}^{\prime}_{\text{i}}\) as follows:
\begin{equation}
\mathbf{e}^{\prime}_{\text{u}} = \text{MLP}(\mathbf{e}_{\text{u}})
\end{equation}
\begin{equation}
\mathbf{e}^{\prime}_{\text{t}} = \text{MLP}(\mathbf{e}_{\text{t}})
\end{equation}
\begin{equation}
\mathbf{e}^{\prime}_{\text{i}} = \text{MLP}(\mathbf{e}_{\text{i}}), \quad i \in \{1, \dots, L\}
\end{equation}
\subsubsection{Frequency-Adaptive Relevant Items Fusion}
To enhance the robustness of item embeddings during training, the item-level features \(\mathbf{e}_{\text{item}}\) are obtained as follows:
\begin{equation}
\text{sim}(\mathbf{e}^{\prime}_{t}, \mathbf{e}^{\prime}_{i}) = \frac{\mathbf{e}^{\prime}_{t} \cdot \mathbf{e}^{\prime}_{\text{masked\_i}}}{\|\mathbf{e}^{\prime}_{t}\| \|\mathbf{e}^{\prime}_{\text{masked\_i}}\|}
\end{equation}
\begin{equation}
\mathbf{e}_{\text{top-k}} = \text{Top-k}\left\{\text{sim}(\mathbf{e}^{\prime}_{t}, \mathbf{e}^{\prime}_{i}) \mid i \in \{1, \dots, L\}\right\}
\end{equation}
\begin{equation}
\mathbf{e}_{\text{item}} = \sum_{i=1}^{k} \mathbf{e}_{\text{top-k}, i}
\end{equation}
where \( \mathbf{e^{\prime}_{\text{t}}} \) represents the target item, \( \mathbf{e^{\prime}_{\text{masked\_i}}} \) is gained from \( \mathbf{e^{\prime}_{\text{i}}} \) with frequency-guided stochastic masking. The top-k similar item embeddings are then processed through a fusion layer to produce the final item embedding. We utilize the element-wise addition as our fusion operation.
\section{EXPERIMENTS}
\subsection{Experimental Setup}
\subsubsection{Dataset.}
We conducted experiments using both a public dataset and one real-world business dataset. The key statistics of these datasets are presented in Table \ref{tab:dataset_statistics}.
\begin{itemize}
\item \textbf{KDD Cup 2012}: A CTR prediction dataset comprising advertising logs from Tencent, which include queries and user information. We randomly selected 10\% of the users from the complete dataset for computation efficiency.
\item \textbf{Meituan}: A real-world dataset, sourced from Meituan's recommendation platform, contains extensive user-item interaction data that reflects actual business scenarios.
\end{itemize}
\begin{table}[h]
\centering
\caption{Statistics of datasets used in our experiments.}
\label{tab:dataset_statistics}
\begin{tabular}{lccc}
\toprule
\textbf{Dataset} & \textbf{\#users} & \textbf{\#items} & \textbf{\#interactions} \\
\hline
KDD Cup 2012 & 2,202,355 & 288,794 & 13,624,635 \\
Meituan & 152,287,209 & 160,837,520 & 2,304,146,513 \\
\bottomrule
\end{tabular}
\end{table}
\subsubsection{Baselines.}
To demonstrate the effectiveness of our proposed framework, we compare it with the popular CTR baseline models (parameter settings following \cite{hong2024print}):
\begin{itemize}
\item DIN \cite{zhou2018deep}: a leading sequential CTR model that uses an attention mechanism to identify target-related interests.
\item DeepFM \cite{guo2017deepfm}: a popular CTR model that merges factorization machines with deep learning techniques for feature interaction.
\item DeepCharMatch \cite{gligorijevic2019deeply}: a method that directly models semantic information at the character level using query-ad pairs.
\item SuKD \cite{wang2022learning}: a model that incorporates additional NLP knowledge in the fine-tuning of PLMs.
\item BERT4CTR \cite{wang2023bert4ctr}: an effective framework for integrating PLMs with non-textual features.
\item PRINT \cite{hong2024print}: a BERT-based model that improves CTR prediction by accounting for personalized incentives in query-ad semantic relevance.
\end{itemize}
\subsubsection{Evaluation Metrics.}
To thoroughly assess our approach, we adopted distinct metrics for evaluating the effectiveness of the distillation process and the model's overall performance while examining the relationship between these two evaluations.
\paragraph{Distillation Evaluation Metric.} To evaluate the effectiveness of our distillation process, we calculate the F1 score based on predicted key phrases. Cosine similarity is applied to determine phrase equivalence, leveraging embeddings generated by a BERT model. We manually annotated a subset of the LLM's outputs to establish a ground truth.
\paragraph{Model Performance Metric.} The primary metric for evaluating the model's performance is the Area Under the ROC Curve (AUC), a widely recognized measure of a model's capability to distinguish between positive and negative instances. In addition, we utilize the Relative Improvement (RelaImpr) metric \cite{yan2014coupled} to quantify the comparative enhancement our model achieves over existing models.
\subsection{Overall Performance}
In this section, we evaluate the performance of our novel LLM-infused CTR prediction framework against PRINT\cite{hong2024print} and other baseline models across the two datasets. As detailed in Table 2, our approach demonstrates superior performance. Our framework leverages the deep semantic capabilities of Large Language Models as well as end-to-end training and inference processes. Compared to PRINT, our approach achieves a notable improvement in AUC, with increases of 0.25\% and 0.63\% over the KDD Cup 2012 and Meituan datasets, respectively.
\begin{table}[h]
\centering
\caption{Performance comparison of our proposed MSD.}
\begin{tabular}{lccccc}
\toprule
\textbf{Models} & \multicolumn{2}{c}{\textbf{KDD Cup 2012}} & \multicolumn{2}{c}{\textbf{Meituan}} \\
\cmidrule(lr){2-3} \cmidrule(lr){4-5}
& \textbf{AUC} & \textbf{RelaImpr} & \textbf{AUC} & \textbf{RelaImpr} \\
\midrule
DeepFM & 0.7763 & 0.00\% & 0.6938 & 0.00\% \\
DIN & 0.7792 & 1.05\% & 0.6963 & 1.29\% \\
DeepCharMatch & 0.7794 & 1.12\% & 0.6967 & 1.50\% \\
SuKD & 0.7821 & 2.10\% & 0.6960 & 1.14\% \\
NumBERT & 0.7832 & 2.50\% & 0.6983 & 2.32\% \\
BERT4CTR & 0.7838 & 2.71\% & 0.7004 & 3.41\% \\
PRINT & 0.7846 & 3.00\% & 0.7024 & 4.43\% \\
\hline
\textbf{Our MSD} & \textbf{0.7871} & \textbf{3.91\%} & \textbf{0.7087} & \textbf{7.64\%} \\
\bottomrule
\end{tabular}
\end{table}
\subsection{Ablation Study for Our Framework}
We performed a comprehensive ablation study to evaluate the contribution of each module within our framework. As depicted in Table \ref{tab:ablation_study}, each module significantly contributes to the overall performance improvement of the complete model.
\begin{table}[h]
\centering
\begin{tabular}{lc}
\toprule
\textbf{Methods} & \textbf{AUC} \\ \hline
w/o LoRA & 0.7075\textsuperscript{(-0.12\%)} \\
w/o Item Level Fusion & 0.7069\textsuperscript{(-0.18\%)} \\
w/o User Level & 0.7054\textsuperscript{(-0.33\%)} \\
\textbf{MSD (our full model)} & \textbf{0.7087} \\
\bottomrule
\end{tabular}
\caption{Ablation study of the MSD over the Meituan datasets.}
\label{tab:ablation_study}
\end{table}
\subsection{Effectiveness of LLM Distillation}
\begin{figure}
\centering
\includegraphics[width=\linewidth]{f1_vs_auc.png}
\caption{Relationship between distillation metric F1 score and CTR model performance metric AUC on the Meituan dataset. The initial low F1 score improves to 0.73 with additional fine-tuning data and data augmentation strategies, such as key phrase shuffling and dictionary substitutions.}
\label{fig:f1_vs_auc}
\end{figure}
Our experiments demonstrate a positive correlation between the knowledge distillation process and the performance of the CTR model, highlighting the critical role of an effective distillation strategy in enhancing model performance. Specifically, when the F1 score increases from \( 0.05 \) to \( 0.53 \), the AUC score of the CTR model shows a significant improvement. However, beyond an F1 score of \( 0.60 \), the rate of increase in the AUC score begins to diminish as shown in Figure \ref{fig:f1_vs_auc}. This observation suggests that the current method can enhance CTR model performance only up to a certain level. To further improve the CTR model, future research could explore more sophisticated designs for the distillation task to overcome this performance plateau.
\subsection{Online Deployment and A/B Test Results}
To reduce the inference time of the CTR model, we implement a combination of pre-computation and a hierarchical caching system, as inspired by PRINT\cite{hong2024print}. For target item embeddings, we store pre-computed embeddings of top items ranked by exposure counts in Redis. If an item is not found in the cache, its embedding is computed in real time after the recall phase and before being fed into the CTR model. These newly computed embeddings are then cached in Redis, utilizing an eviction policy to manage storage efficiently.
\begin{table}[ht]
\centering
\caption{Results of Online A/B Testing.}
\begin{tabular}{cccc}
\toprule
\textbf{Method} & \textbf{CTR Gain} & \textbf{CPM Gain} & \textbf{Inference Time} \\
\hline
Baseline & - & - & 35 ms \\
\textbf{MSD} & $\textbf{+2.12\%}$ & $\textbf{+2.59\%}$ & 37.2 ms \\
\bottomrule
\end{tabular}
\label{tab:ab_test_results}
\end{table}
Between October 20, 2024, and October 30, 2024, we conducted an online A/B test on Meituan's sponsored search advertising system to validate our proposed framework. As illustrated in Table \ref{tab:ab_test_results}, our model demonstrates a significant improvement over the naive implementation of the LLM, achieving a 2.12\% increase in Click-Through Rate (CTR) and a 2.59\% increase in Cost Per Mille (CPM).
\section{Conclusion}
In this paper, we present an innovative LLM-infused framework for CTR prediction designed to effectively utilize semantic information in CTR tasks. By introducing the MKDM and MKIM, our framework captures deep semantic insights at both item and user levels, addressing the limitations of traditional ID-based recommendation systems and existing methods that attempt to integrate LLMs or BERT into CTR tasks. Our model significantly enhances the AUC on the Meituan dataset and achieves a notable increase in system revenue by 2.59\%, and CTR by 2.12\% in the Meituan sponsored-search system. This approach opens new avenues for incorporating LLMs into CTR prediction, and we hope our work inspires further research and exploration in this field.
%%
%% The next two lines define the bibliography style to be used, and
%% the bibliography file.
\bibliographystyle{ACM-Reference-Format}
\balance
\bibliography{sample-base}
\end{document}
\endinput
%%
%% End of file `sample-sigconf.tex'.
%%% -*-BibTeX-*-
%%% Do NOT edit. File created by BibTeX with style
%%% ACM-Reference-Format-Journals [18-Jan-2012].
\begin{thebibliography}{18}
%%% ====================================================================
%%% NOTE TO THE USER: you can override these defaults by providing
%%% customized versions of any of these macros before the \bibliography
%%% command. Each of them MUST provide its own final punctuation,
%%% except for \shownote{}, \showDOI{}, and \showURL{}. The latter two
%%% do not use final punctuation, in order to avoid confusing it with
%%% the Web address.
%%%
%%% To suppress output of a particular field, define its macro to expand
%%% to an empty string, or better, \unskip, like this:
%%%
%%% \newcommand{\showDOI}[1]{\unskip} % LaTeX syntax
%%%
%%% \def \showDOI #1{\unskip} % plain TeX syntax
%%%
%%% ====================================================================
\ifx \showCODEN \undefined \def \showCODEN #1{\unskip} \fi
\ifx \showDOI \undefined \def \showDOI #1{#1}\fi
\ifx \showISBNx \undefined \def \showISBNx #1{\unskip} \fi
\ifx \showISBNxiii \undefined \def \showISBNxiii #1{\unskip} \fi
\ifx \showISSN \undefined \def \showISSN #1{\unskip} \fi
\ifx \showLCCN \undefined \def \showLCCN #1{\unskip} \fi
\ifx \shownote \undefined \def \shownote #1{#1} \fi
\ifx \showarticletitle \undefined \def \showarticletitle #1{#1} \fi
\ifx \showURL \undefined \def \showURL {\relax} \fi
% The following commands are used for tagged output and should be
% invisible to TeX
\providecommand\bibfield[2]{#2}
\providecommand\bibinfo[2]{#2}
\providecommand\natexlab[1]{#1}
\providecommand\showeprint[2][]{arXiv:#2}
\bibitem[Bian et~al\mbox{.}(2020)]%
{bian2020can}
\bibfield{author}{\bibinfo{person}{Weijie Bian}, \bibinfo{person}{Kailun Wu}, \bibinfo{person}{Lejian Ren}, \bibinfo{person}{Qi Pi}, \bibinfo{person}{Yujing Zhang}, \bibinfo{person}{Can Xiao}, \bibinfo{person}{Xiang-Rong Sheng}, \bibinfo{person}{Yong-Nan Zhu}, \bibinfo{person}{Zhangming Chan}, \bibinfo{person}{Na Mou}, {et~al\mbox{.}}} \bibinfo{year}{2020}\natexlab{}.
\newblock \showarticletitle{Can: Feature co-action for click-through rate prediction}.
\newblock \bibinfo{journal}{\emph{arXiv preprint arXiv:2011.05625}} (\bibinfo{year}{2020}).
\newblock
\bibitem[D'Abramo et~al\mbox{.}(2024)]%
{d2024dynamic}
\bibfield{author}{\bibinfo{person}{Jacopo D'Abramo}, \bibinfo{person}{Andrea Zugarini}, {and} \bibinfo{person}{Paolo Torroni}.} \bibinfo{year}{2024}\natexlab{}.
\newblock \showarticletitle{Dynamic Few-Shot Learning for Knowledge Graph Question Answering}.
\newblock \bibinfo{journal}{\emph{arXiv preprint arXiv:2407.01409}} (\bibinfo{year}{2024}).
\newblock
\bibitem[Geng et~al\mbox{.}(2024)]%
{geng2024breaking}
\bibfield{author}{\bibinfo{person}{Binzong Geng}, \bibinfo{person}{Zhaoxin Huan}, \bibinfo{person}{Xiaolu Zhang}, \bibinfo{person}{Yong He}, \bibinfo{person}{Liang Zhang}, \bibinfo{person}{Fajie Yuan}, \bibinfo{person}{Jun Zhou}, {and} \bibinfo{person}{Linjian Mo}.} \bibinfo{year}{2024}\natexlab{}.
\newblock \showarticletitle{Breaking the length barrier: Llm-enhanced CTR prediction in long textual user behaviors}. In \bibinfo{booktitle}{\emph{Proceedings of the 47th International ACM SIGIR Conference on Research and Development in Information Retrieval}}. \bibinfo{pages}{2311--2315}.
\newblock
\bibitem[Gligorijevic et~al\mbox{.}(2019)]%
{gligorijevic2019deeply}
\bibfield{author}{\bibinfo{person}{Jelena Gligorijevic}, \bibinfo{person}{Djordje Gligorijevic}, \bibinfo{person}{Ivan Stojkovic}, \bibinfo{person}{Xiao Bai}, \bibinfo{person}{Amit Goyal}, {and} \bibinfo{person}{Zoran Obradovic}.} \bibinfo{year}{2019}\natexlab{}.
\newblock \showarticletitle{Deeply supervised model for click-through rate prediction in sponsored search}.
\newblock \bibinfo{journal}{\emph{Data Mining and Knowledge Discovery}} \bibinfo{volume}{33} (\bibinfo{year}{2019}), \bibinfo{pages}{1446--1467}.
\newblock
\bibitem[Gu et~al\mbox{.}(2024)]%
{gu2024minillm}
\bibfield{author}{\bibinfo{person}{Yuxian Gu}, \bibinfo{person}{Li Dong}, \bibinfo{person}{Furu Wei}, {and} \bibinfo{person}{Minlie Huang}.} \bibinfo{year}{2024}\natexlab{}.
\newblock \showarticletitle{MiniLLM: Knowledge distillation of large language models}. In \bibinfo{booktitle}{\emph{The Twelfth International Conference on Learning Representations}}.
\newblock
\bibitem[Guo et~al\mbox{.}(2017)]%
{guo2017deepfm}
\bibfield{author}{\bibinfo{person}{Huifeng Guo}, \bibinfo{person}{Ruiming Tang}, \bibinfo{person}{Yunming Ye}, \bibinfo{person}{Zhenguo Li}, {and} \bibinfo{person}{Xiuqiang He}.} \bibinfo{year}{2017}\natexlab{}.
\newblock \showarticletitle{DeepFM: a factorization-machine based neural network for CTR prediction}.
\newblock \bibinfo{journal}{\emph{arXiv preprint arXiv:1703.04247}} (\bibinfo{year}{2017}).
\newblock
\bibitem[Hong et~al\mbox{.}(2024)]%
{hong2024print}
\bibfield{author}{\bibinfo{person}{Zhaolin Hong}, \bibinfo{person}{Haitao Wang}, \bibinfo{person}{Chengjie Qian}, \bibinfo{person}{Wei Chen}, \bibinfo{person}{Tianqi He}, \bibinfo{person}{Yajie Zou}, \bibinfo{person}{Qiang Liu}, {and} \bibinfo{person}{Xingxing Wang}.} \bibinfo{year}{2024}\natexlab{}.
\newblock \showarticletitle{PRINT: Personalized Relevance Incentive Network for CTR Prediction in Sponsored Search}. In \bibinfo{booktitle}{\emph{Companion Proceedings of the ACM on Web Conference 2024}}. \bibinfo{pages}{190--195}.
\newblock
\bibitem[Hu et~al\mbox{.}(2021)]%
{hu2021lora}
\bibfield{author}{\bibinfo{person}{Edward~J Hu}, \bibinfo{person}{Yelong Shen}, \bibinfo{person}{Phillip Wallis}, \bibinfo{person}{Zeyuan Allen-Zhu}, \bibinfo{person}{Yuanzhi Li}, \bibinfo{person}{Shean Wang}, \bibinfo{person}{Lu Wang}, {and} \bibinfo{person}{Weizhu Chen}.} \bibinfo{year}{2021}\natexlab{}.
\newblock \showarticletitle{Lora: Low-rank adaptation of large language models}.
\newblock \bibinfo{journal}{\emph{arXiv preprint arXiv:2106.09685}} (\bibinfo{year}{2021}).
\newblock
\bibitem[Li et~al\mbox{.}(2023)]%
{li2023ctrl}
\bibfield{author}{\bibinfo{person}{Xiangyang Li}, \bibinfo{person}{Bo Chen}, \bibinfo{person}{Lu Hou}, {and} \bibinfo{person}{Ruiming Tang}.} \bibinfo{year}{2023}\natexlab{}.
\newblock \showarticletitle{Ctrl: Connect tabular and language model for ctr prediction}.
\newblock \bibinfo{journal}{\emph{CoRR}} (\bibinfo{year}{2023}).
\newblock
\bibitem[Lin et~al\mbox{.}(2024)]%
{lin2024clickprompt}
\bibfield{author}{\bibinfo{person}{Jianghao Lin}, \bibinfo{person}{Bo Chen}, \bibinfo{person}{Hangyu Wang}, \bibinfo{person}{Yunjia Xi}, \bibinfo{person}{Yanru Qu}, \bibinfo{person}{Xinyi Dai}, \bibinfo{person}{Kangning Zhang}, \bibinfo{person}{Ruiming Tang}, \bibinfo{person}{Yong Yu}, {and} \bibinfo{person}{Weinan Zhang}.} \bibinfo{year}{2024}\natexlab{}.
\newblock \showarticletitle{ClickPrompt: CTR Models are Strong Prompt Generators for Adapting Language Models to CTR Prediction}. In \bibinfo{booktitle}{\emph{Proceedings of the ACM on Web Conference 2024}}. \bibinfo{pages}{3319--3330}.
\newblock
\bibitem[Pi et~al\mbox{.}(2020)]%
{pi2020search}
\bibfield{author}{\bibinfo{person}{Qi Pi}, \bibinfo{person}{Guorui Zhou}, \bibinfo{person}{Yujing Zhang}, \bibinfo{person}{Zhe Wang}, \bibinfo{person}{Lejian Ren}, \bibinfo{person}{Ying Fan}, \bibinfo{person}{Xiaoqiang Zhu}, {and} \bibinfo{person}{Kun Gai}.} \bibinfo{year}{2020}\natexlab{}.
\newblock \showarticletitle{Search-based user interest modeling with lifelong sequential behavior data for click-through rate prediction}. In \bibinfo{booktitle}{\emph{Proceedings of the 29th ACM International Conference on Information \& Knowledge Management}}. \bibinfo{pages}{2685--2692}.
\newblock
\bibitem[Wang et~al\mbox{.}(2023)]%
{wang2023bert4ctr}
\bibfield{author}{\bibinfo{person}{Dong Wang}, \bibinfo{person}{Kav{\'e} Salamatian}, \bibinfo{person}{Yunqing Xia}, \bibinfo{person}{Weiwei Deng}, {and} \bibinfo{person}{Qi Zhang}.} \bibinfo{year}{2023}\natexlab{}.
\newblock \showarticletitle{BERT4CTR: An Efficient Framework to Combine Pre-trained Language Model with Non-textual Features for CTR Prediction}. In \bibinfo{booktitle}{\emph{Proceedings of the 29th ACM SIGKDD Conference on Knowledge Discovery and Data Mining}}. \bibinfo{pages}{5039--5050}.
\newblock
\bibitem[Wang et~al\mbox{.}(2022)]%
{wang2022learning}
\bibfield{author}{\bibinfo{person}{Dong Wang}, \bibinfo{person}{Shaoguang Yan}, \bibinfo{person}{Yunqing Xia}, \bibinfo{person}{Kav{\'e} Salamatian}, \bibinfo{person}{Weiwei Deng}, {and} \bibinfo{person}{Qi Zhang}.} \bibinfo{year}{2022}\natexlab{}.
\newblock \showarticletitle{Learning Supplementary NLP Features for CTR Prediction in Sponsored Search}. In \bibinfo{booktitle}{\emph{Proceedings of the 28th ACM SIGKDD Conference on Knowledge Discovery and Data Mining}}. \bibinfo{pages}{4010--4020}.
\newblock
\bibitem[Wang et~al\mbox{.}(2024)]%
{wang2024can}
\bibfield{author}{\bibinfo{person}{Yuling Wang}, \bibinfo{person}{Changxin Tian}, \bibinfo{person}{Binbin Hu}, \bibinfo{person}{Yanhua Yu}, \bibinfo{person}{Ziqi Liu}, \bibinfo{person}{Zhiqiang Zhang}, \bibinfo{person}{Jun Zhou}, \bibinfo{person}{Liang Pang}, {and} \bibinfo{person}{Xiao Wang}.} \bibinfo{year}{2024}\natexlab{}.
\newblock \showarticletitle{Can Small Language Models be Good Reasoners for Sequential Recommendation?}. In \bibinfo{booktitle}{\emph{Proceedings of the ACM on Web Conference 2024}}. \bibinfo{pages}{3876--3887}.
\newblock
\bibitem[Xi et~al\mbox{.}(2024)]%
{xi2024towards}
\bibfield{author}{\bibinfo{person}{Yunjia Xi}, \bibinfo{person}{Weiwen Liu}, \bibinfo{person}{Jianghao Lin}, \bibinfo{person}{Xiaoling Cai}, \bibinfo{person}{Hong Zhu}, \bibinfo{person}{Jieming Zhu}, \bibinfo{person}{Bo Chen}, \bibinfo{person}{Ruiming Tang}, \bibinfo{person}{Weinan Zhang}, {and} \bibinfo{person}{Yong Yu}.} \bibinfo{year}{2024}\natexlab{}.
\newblock \showarticletitle{Towards open-world recommendation with knowledge augmentation from large language models}. In \bibinfo{booktitle}{\emph{Proceedings of the 18th ACM Conference on Recommender Systems}}. \bibinfo{pages}{12--22}.
\newblock
\bibitem[Yan et~al\mbox{.}(2014)]%
{yan2014coupled}
\bibfield{author}{\bibinfo{person}{Ling Yan}, \bibinfo{person}{Wu-Jun Li}, \bibinfo{person}{Gui-Rong Xue}, {and} \bibinfo{person}{Dingyi Han}.} \bibinfo{year}{2014}\natexlab{}.
\newblock \showarticletitle{Coupled group lasso for web-scale ctr prediction in display advertising}. In \bibinfo{booktitle}{\emph{International conference on machine learning}}. PMLR, \bibinfo{pages}{802--810}.
\newblock
\bibitem[Yang et~al\mbox{.}(2023)]%
{yang2023practice}
\bibfield{author}{\bibinfo{person}{Hao Yang}, \bibinfo{person}{Ziliang Wang}, \bibinfo{person}{Weijie Bian}, {and} \bibinfo{person}{Yifan Zeng}.} \bibinfo{year}{2023}\natexlab{}.
\newblock \showarticletitle{Practice on Effectively Extracting NLP Features for Click-Through Rate Prediction}. In \bibinfo{booktitle}{\emph{Proceedings of the 32nd ACM International Conference on Information and Knowledge Management}}. \bibinfo{pages}{4887--4893}.
\newblock
\bibitem[Zhou et~al\mbox{.}(2018)]%
{zhou2018deep}
\bibfield{author}{\bibinfo{person}{Guorui Zhou}, \bibinfo{person}{Xiaoqiang Zhu}, \bibinfo{person}{Chenru Song}, \bibinfo{person}{Ying Fan}, \bibinfo{person}{Han Zhu}, \bibinfo{person}{Xiao Ma}, \bibinfo{person}{Yanghui Yan}, \bibinfo{person}{Junqi Jin}, \bibinfo{person}{Han Li}, {and} \bibinfo{person}{Kun Gai}.} \bibinfo{year}{2018}\natexlab{}.
\newblock \showarticletitle{Deep interest network for click-through rate prediction}. In \bibinfo{booktitle}{\emph{Proceedings of the 24th ACM SIGKDD international conference on knowledge discovery \& data mining}}. \bibinfo{pages}{1059--1068}.
\newblock
\end{thebibliography}