Chaos in a one-dimensional compressible flow
Extracted source text ยท arXiv nlin/0701050
%% ****** Start of file template.aps ****** %
%%
%%
%% This file is part of the APS files in the REVTeX 4 distribution.
%% Version 4.0 of REVTeX, August 2001
%%
%%
%% Copyright (c) 2001 The American Physical Society.
%%
%% See the REVTeX 4 README file for restrictions and more information.
%%
%
% This is a template for producing manuscripts for use with REVTEX 4.0
% Copy this file to another name and then work on that file.
% That way, you always have this original template file to use.
%
% Group addresses by affiliation; use superscriptaddress for long
% author lists, or if there are many overlapping affiliations.
% For Phys. Rev. appearance, change preprint to twocolumn.
% Choose pra, prb, prc, prd, pre, prl, prstab, or rmp for journal
% Add 'draft' option to mark overfull boxes with black boxes
% Add 'showpacs' option to make PACS codes appear
% Add 'showkeys' option to make keywords appear
%\documentclass[aps,prl,preprint,groupedaddress,amsmath]{revtex4}
%\documentclass[aps,prl,preprint,superscriptaddress]{revtex4}
\documentclass[aps,prl,twocolumn,showpacs,groupedaddress,amsmath]{revtex4}
%\documentclass[aps,twocolumn,showpacs,preprintnumbers,amsmath,amssymb]{revtex4}
% You should use BibTeX and apsrev.bst for references
% Choosing a journal automatically selects the correct APS
% BibTeX style file (bst file), so only uncomment the line
% below if necessary.
%\bibliographystyle{apsrev}
\usepackage{graphicx}% Include figure files
%\usepackage{rotating}% Rotated figures
%\usepackage{setspace}% Set single spacing
\begin{document}
\preprint{PRL/GerigHubler06}
% Use the \preprint command to place your local institutional report
% number in the upper righthand corner of the title page in preprint mode.
% Multiple \preprint commands are allowed.
% Use the 'preprintnumbers' class option to override journal defaults
% to display numbers if necessary
%\preprint{}
%Title of paper
\title{Chaos in a one-dimensional compressible flow}
% repeat the \author .. \affiliation etc. as needed
% \email, \thanks, \homepage, \altaffiliation all apply to the current
% author. Explanatory text should go in the []'s, actual e-mail
% address or url should go in the {}'s for \email and \homepage.
% Please use the appropriate macro foreach each type of information
% \affiliation command applies to all authors since the last
% \affiliation command. The \affiliation command should follow the
% other information
% \affiliation can be followed by \email, \homepage, \thanks as well.
\author{Austin Gerig}
\email{gerig@uiuc.edu}
\author{Alfred H\"{u}bler}
\email{a-hubler@uiuc.edu}
\affiliation{
%\begin{singlespace}
Center for Complex Systems Research, Department of
Physics, University of Illinois at Urbana-Champaign,\\ 1110 West Green Street, Urbana, Illinois 61801
%\end{singlespace}
}
%Collaboration name if desired (requires use of superscriptaddress
%option in \documentclass). \noaffiliation is required (may also be
%used with the \author command).
%\collaboration can be followed by \email, \homepage, \thanks as well.
%\collaboration{}
%\noaffiliation
\date{\today}
\begin{abstract}
% insert abstract here
We study the dynamics of a one-dimensional discrete flow with open boundaries - a series of moving point particles connected by ideal springs. These particles flow towards an inlet at constant velocity, pass into a region where they are free to move according to their nearest neighbor interactions, and then pass an outlet where they travel with a sinusoidally varying velocity. As the amplitude of the outlet oscillations is increased, we find that the resident time of particles in the chamber follows a bifurcating (Feigenbaum) route to chaos. This irregular dynamics may be related to the complex behavior of many particle discrete flows or is possibly a low-dimensional analogue of non-stationary flow in continuous systems.
\end{abstract}
% insert suggested PACS numbers in braces on next line
\pacs{05.45.Ac}
%05.45.Ac Low-dimensional chaos
%05.45.Pq Numerical simulations of chaotic systems
%45.05.+x General theory of classical mechanics of discrete systems
%45.50.-j Dynamics and kinematics of a particle and a system of particles
%47.10.-g General theory in fluid dynamics
%47.52.+j Chaos in fluid dynamics
% insert suggested keywords - APS authors don't need to do this
%\keywords{}
%\maketitle must follow title, authors, abstract, \pacs, and \keywords
\maketitle
% body of paper here - Use proper section commands
% References should be done using the \cite, \ref, and \label commands
%\section{Introduction}
Flows are a frequent topic of research among physicists - fluid flow \cite{Sreenivasan99}, traffic flow \cite{Helbing01}, crowd movement \cite{Helbing00}, and granular flow \cite{Jaeger96} are just a few examples. They are of particular interest because the particles that constitute the flow can exhibit complex behavior at certain flow parameters. There is a large body of work focused on understanding the cause of this motion and predicting the patterns and structures that these flows produce \cite{Sreenivasan99, Helbing01, Helbing00, Jaeger96, Gollub99}.
Most flows consist of many mutually interacting degrees of freedom and a complete description of the dynamics is often impossible. It is not surprising then, that theories have historically focused on a statistical description of complex flow \cite{Aref96}. Several studies, however, suggest that we can understand flows at a more fundamental level. Cellular automata fluid models are an example - for certain types of flows, the scale and particulars of collisions seem unimportant to the overall structure of the flow\cite{Wolfram86,Frisch86}. The study of bifurcations in Taylor-Couette flow \cite{Brandstater83} suggest that the complicated motion in large scale flows can result from the interplay of a few chaotic degrees of freedom. Several authors have successfully extended these ideas to the general study of large coherent structures in fluid flow \cite{Holmes96}. Finally, it has recently been shown that a one-dimensional series of nonlinear oscillators, when driven, can behave quite similar to larger scale turbulent flow \cite{Peyrard02}
We seek to study complex open-boundary flow using a bottom up approach - by studying the simplest possible flows that exhibit complex motion. The low-dimensional model we present here is unique because particles interact with linear forces and the system has open boundaries. There are many studies of low-dimensional, \emph{closed}-boundary dissipative systems in the literature. Examples include driven, damped pendulums, the Lorenz equations, and driven Frenkel-Kontorova models \cite{Sagdeev88, Braun98}. Like these driven, dissipative systems, the system we present continually gains and depletes energy, but it also allows particles to pass across boundaries into and out of the flow. Research of complex, yet very low-dimensional, open-boundary systems is scarce in the literature.
We present in this communication a simple one-dimensional flow with open boundaries that exhibits chaotic dynamics. The system consists of a line of point particles interacting with nearest neighbors according to a linear force law (Hooke's law). These particles travel towards an inlet at constant velocity, pass into a region where they are free to move according to their nearest neighbor interactions, and then pass an outlet where they are driven so that they have a sinusoidally varying velocity. This outlet driving force continually supplies energy to the system and energy is dissipated when particles exit at any point away from their equilibrium position. As the amplitude of the outlet oscillations is increased, we find that the resident time of particles between the inlet and outlet follows a bifurcating route to chaos. We discuss the resulting dynamics of this system and suggest possible implications for larger dimensional flows.
%\section{The System}
\begin{figure}[htb]
\includegraphics[width=3.4in]{system.eps}
\caption{\label{fig.system} Diagram of the system. A series of point particles are connected by ideal springs and initially spaced $S$ apart. Before reaching $x=0$ (the inlet) and after passing $x=L$ (the outlet), each particle is constrained to the velocities shown. A particle moves according to its nearest neighbor interactions when between these points.}
\end{figure}
The system consists of a one-dimensional chain of identical point particles spaced a distance $S$ apart and connected by ideal springs. The particles travel in the $\hat{x}$-direction and their positions are labeled $x_{i}$, where $i$ is the index $i=1,2,\dots,N$. The number of particles $N$ is chosen large enough so that the flow is sustained throughout our simulations. Particles undergo different dynamics as they pass certain points along the flow. Fig.~\ref{fig.system} is a schematic of the system.
The inlet is located at $x=0$, the outlet at $x=L$, and the region in between is referred to as the chamber. The time when particle $i$ reaches $x=0$ is labeled $t^{i}_{in}$ and is calculated $t^{i}_{in}=i S/v$. The time when particle $i$ reaches $x=L$ is labeled $t^{i}_{out}$ and is determined implicitly from the equation $x_{i}(t^{i}_{out})=L$. The velocity of a particle before and after these times is constrained as given in Eqs.~(\ref{eq.vin},\ref{eq.vout}). Particle velocities are not constrained between $t^{i}_{in}$ and $t^{i}_{out}$.
\begin{subequations}
\begin{eqnarray}
\label{eq.vin}
\dot{x}_{i}=v & & t < t^{i}_{in},\\
\label{eq.vout}
\dot{x}_{i}=v+A \cos(\omega (t-t^i_{out})) & & t\geq t^{i}_{out}.
\end{eqnarray}
\end{subequations}
Here $A$ and $\omega$ are the amplitude and frequency of velocity oscillations after reaching the outlet.
The initial spacing between particles is $S$, a value chosen such that the time between particles entering the chamber is much greater than the average resident time of individual particles within the chamber. This ensures that only one particle is unconstrained at any moment in time.
The following are the complete equations of motion for the particles.
\begin{subequations}
\begin{eqnarray}
x_{i}=v t-i S & & t < t^{i}_{in},\\
m \ddot{x}_{i}+2k x_{i}=k(x_{i-1}+x_{i+1}) & & t^{i}_{in}\leq t < t^{i}_{out},\\
\dot{x}_{i}=v+A \cos(\omega (t-t^i_{out})) & & t\geq t^{i}_{out}.
\end{eqnarray}
\end{subequations}
All particles have the same mass, $m$, and the linear restoring force, $k$, is the same for all springs. The solution for the position of the $i_{th}$ particle for times $t^{i}_{in}\leq t \leq t^{i}_{out}$ is given in Eq.~(\ref{eq.xsol}). It is used to solve $x_{i}(t^{i}_{out})=L$ implicitly for $t^{i}_{out}$ using Newton's method.
\begin{widetext}
\begin{equation}
\label{eq.xsol}
x_{i}(t)=B_1 \cos(\sqrt{2\alpha}t)+B_2 \sin(\sqrt{2\alpha}t) + \frac{A}{\omega(2-\alpha\omega^2)}\sin(\omega(t-t^i_{out}))+vt+(L-S)/2
\end{equation}
\end{widetext}
where,
\begin{subequations}
\begin{eqnarray}
\alpha \; & = & m/k \\
B_1 & = & \frac{(S-L)}{2}-\frac{A}{\omega(2-\alpha\omega^2)}\sin(-\omega t^i_{out}) \\
B_2 & = & -\frac{A}{\sqrt{2\alpha}(2-\alpha\omega^2)}\cos(-\omega t^i_{out})
\end{eqnarray}
\end{subequations}
%\section{Results}
In all of the following results, we use the following parameters: $S=100$, $L=2$, $v=10$, $\alpha=.06$, $\omega=13.2$, $A=0$ to $40$. These parameter values ensure that, at most, only one particle is located in the chamber at any moment in time.
For each particle we calculate the resident time within the chamber. This quantity is defined,
\begin{equation}
t^{i}_{res} = t^{i}_{out}-t^{i}_{in}.
\end{equation}
$t^i_{in}$ is determined from Eq.~\ref{eq.vin} and $t^{i}_{out}$ is determined by numerically solving Eq.~\ref{eq.xsol} for $x_{i}(t^{i}_{out})=L$.
Fig.~\ref{fig.returnmap} shows several return maps for the resident time (these map $t^{i}_{res}$ to $t^{i+1}_{res}$). In general $t^{i+1}_{res}=f(t^{i}_{res},t^{i-1}_{res},...)$, but for this system,
\begin{equation}
t^{i+1}_{res}=f(t^{i}_{res}),
\end{equation}
i.e., the return map is one-dimensional. This results from constraining particle velocities before $x=0$ and after $x=L$ - reducing the system to only one degree of freedom.
\begin{figure}[htb]
\includegraphics[width=3.4in]{returnmap.eps}
\caption{\label{fig.returnmap} Return map for $t^{i}_{res}$ for several values of the amplitude, $A$. Parameters for this simulation were: $S=100$, $L=2$, $v=10$, $\alpha=.06$, $\omega=13.2$.}
\end{figure}
\clearpage
\begin{widetext}
\begin{figure*}[htb]
\includegraphics[width=7in]{bifurcation_lyapunov.eps}
\caption{\label{fig.bifurcation_lyapunov} a) Bifurcation diagram of $t^{i}_{res}$ plotted for values of $A$ from 25 to 40. b) The Lyapunov exponent, $\lambda$, as a function of the amplitude of outlet oscillations, $A$, also from 25 to 40. Parameters for this simulation were: $S=100$, $L=2$, $v=10$, $\alpha=.06$, $\omega=13.2$. The first three bifurcation points are located at $A=29.0$, $A=32.1$, and $A=33.1$; and $\lambda>0$ first at $A=33.4$}
\end{figure*}
\end{widetext}
As $A$ is increased, a peak develops in the return map and the fixed point eventually becomes unstable. The one-hump map that develops is likely to exhibit the features of many other unimodal return maps - specifically a bifurcation route to chaos \cite{Feigenbaum78}. As Fig.~\ref{fig.bifurcation_lyapunov}a shows, this is indeed the case. The system is iterated onto the attractor and the next 100 values for $t^{i}_{res}$ are plotted for values of the amplitude, $A$, from 25 to 40. The resident time bifurcates several times and eventually becomes chaotic before settling back to a period three dynamics. The first three bifurcation points are located at $A=29.0$, $A=32.1$, and $A=33.1$.
In Fig.~\ref{fig.bifurcation_lyapunov}b we plot the Lyapunov exponent $\lambda$ for the resident time as a function of the amplitude $A$. The Lyapunov exponent is a measure of the separation of infinitesimally close trajectories and in this case is calculated numerically from the following equation,
\begin{equation}
\lambda=\lim_{n \rightarrow \infty}\frac{1}{n}
\sum_{i=0}^{n-1}{\log\left|f'(t^{i}_{res})\right|}.
\end{equation}
When $\lambda>0$ trajectories exponentially diverge, which produces chaos when the trajectories remain bounded. The system becomes chaotic at $A=33.4$ where $\lambda$ first turns positive.
%\section{Discussion}
The system we present above is quite different than other one-dimensional particle models in the literature \cite{Peyrard02, Braun98}. Instead of using nonlinear interactions between particles, the particles in our system interact with linear forces and constraints are applied abruptly at the boundaries. This shows that complex motion can arise in a flow at the boundary between simple constrained motions without the need for nonlinear interactions between particles. Many large scale flows contain regions where the dynamics are tightly constrained to regular motion, with complex motion occuring at the boundaries between these regions. Simple models such as the one we have presented can provide insight into how this behavior develops.
%\section{Conclusions}
Summarizing, we have presented a fully describable one-dimensional flow of point particles connected by ideal springs. Particle motion is constrained before reaching an inlet and after passing an outlet, and the system is shown to exhibit chaotic dynamics when particles are driven sinusoidally after crossing the outlet. The outlet driving force continually adds energy to the system. No drag force is present, but energy is dissipated when particles exit at any point away from their equilibrium positions. The model can be reduced to a one-dimensional map that produces chaotic dynamics, showing that chaos can occur in flows at the boundary between simple constrained motion, even when particles in the flow interact with linear forces.
This work was supported by the National Science Foundation Grant No. NSF PHY
01-40179, NSF DMS 03-25939 ITR, and NSF DGE 03-38215.
%Put \label in argument of \section for cross-referencing
%\section{\label{}}
%\subsection{}
%\subsubsection{}
% If in two-column mode, this environment will change to single-column
% format so that long equations can be displayed. Use
% sparingly.
%\begin{widetext}
% put long equation here
%\end{widetext}
% figures should be put into the text as floats.
% Use the graphics or graphicx packages (distributed with LaTeX2e)
% and the \includegraphics macro defined in those packages.
% See the LaTeX Graphics Companion by Michel Goosens, Sebastian Rahtz,
% and Frank Mittelbach for instance.
%
% Here is an example of the general form of a figure:
% Fill in the caption in the braces of the \caption{} command. Put the label
% that you will use with \ref{} command in the braces of the \label{} command.
% Use the figure* environment if the figure should span across the
% entire page. There is no need to do explicit centering.
% \begin{figure}
% \includegraphics{}%
% \caption{\label{}}
% \end{figure}
% Surround figure environment with turnpage environment for landscape
% figure
% \begin{turnpage}
% \begin{figure}
% \includegraphics{}%
% \caption{\label{}}
% \end{figure}
% \end{turnpage}
% tables should appear as floats within the text
%
% Here is an example of the general form of a table:
% Fill in the caption in the braces of the \caption{} command. Put the label
% that you will use with \ref{} command in the braces of the \label{} command.
% Insert the column specifiers (l, r, c, d, etc.) in the empty braces of the
% \begin{tabular}{} command.
% The ruledtabular enviroment adds doubled rules to table and sets a
% reasonable default table settings.
% Use the table* environment to get a full-width table in two-column
% Add \usepackage{longtable} and the longtable (or longtable*}
% environment for nicely formatted long tables. Or use the the [H]
% placement option to break a long table (with less control than
% in longtable).
% \begin{table}%[H] add [H] placement to break table across pages
% \caption{\label{}}
% \begin{ruledtabular}
% \begin{tabular}{}
% Lines of table here ending with \\
% \end{tabular}
% \end{ruledtabular}
% \end{table}
% Surround table environment with turnpage environment for landscape
% table
% \begin{turnpage}
% \begin{table}
% \caption{\label{}}
% \begin{ruledtabular}
% \begin{tabular}{}
% \end{tabular}
% \end{ruledtabular}
% \end{table}
% \end{turnpage}
% Specify following sections are appendices. Use \appendix* if there
% only one appendix.
%\appendix
%\section{}
% If you have acknowledgments, this puts in the proper section head.
%\begin{acknowledgments}
% put your acknowledgments here.
%\end{acknowledgments}
% Create the reference section using BibTeX:
\begin{thebibliography}{14}
\expandafter\ifx\csname natexlab\endcsname\relax\def\natexlab#1{#1}\fi
\expandafter\ifx\csname bibnamefont\endcsname\relax
\def\bibnamefont#1{#1}\fi
\expandafter\ifx\csname bibfnamefont\endcsname\relax
\def\bibfnamefont#1{#1}\fi
\expandafter\ifx\csname citenamefont\endcsname\relax
\def\citenamefont#1{#1}\fi
\expandafter\ifx\csname url\endcsname\relax
\def\url#1{\texttt{#1}}\fi
\expandafter\ifx\csname urlprefix\endcsname\relax\def\urlprefix{URL }\fi
\providecommand{\bibinfo}[2]{#2}
\providecommand{\eprint}[2][]{\url{#2}}
\bibitem[{\citenamefont{Sreenivasan}(1999)}]{Sreenivasan99}
\bibinfo{author}{\bibfnamefont{K.~R.} \bibnamefont{Sreenivasan}},
\bibinfo{journal}{Rev. Mod. Phys.} \textbf{\bibinfo{volume}{71}},
\bibinfo{pages}{S383} (\bibinfo{year}{1999}).
\bibitem[{\citenamefont{Helbing}(2001)}]{Helbing01}
\bibinfo{author}{\bibfnamefont{D.}~\bibnamefont{Helbing}},
\bibinfo{journal}{Rev. Mod. Phys.} \textbf{\bibinfo{volume}{73}},
\bibinfo{pages}{1067} (\bibinfo{year}{2001}).
\bibitem[{\citenamefont{Helbing et~al.}(2000)\citenamefont{Helbing, Farkas, and
Vicsek}}]{Helbing00}
\bibinfo{author}{\bibfnamefont{D.}~\bibnamefont{Helbing}},
\bibinfo{author}{\bibfnamefont{I.}~\bibnamefont{Farkas}}, \bibnamefont{and}
\bibinfo{author}{\bibfnamefont{T.}~\bibnamefont{Vicsek}},
\bibinfo{journal}{Nature} \textbf{\bibinfo{volume}{407}},
\bibinfo{pages}{487} (\bibinfo{year}{2000}).
\bibitem[{\citenamefont{Jaeger et~al.}(1996)\citenamefont{Jaeger, Nagel, and
Behringer}}]{Jaeger96}
\bibinfo{author}{\bibfnamefont{H.~M.} \bibnamefont{Jaeger}},
\bibinfo{author}{\bibfnamefont{S.~R.} \bibnamefont{Nagel}}, \bibnamefont{and}
\bibinfo{author}{\bibfnamefont{R.~P.} \bibnamefont{Behringer}},
\bibinfo{journal}{Rev. Mod. Phys.} \textbf{\bibinfo{volume}{68}},
\bibinfo{pages}{1259} (\bibinfo{year}{1996}).
\bibitem[{\citenamefont{Gollub and Langer}(1999)}]{Gollub99}
\bibinfo{author}{\bibfnamefont{J.~P.} \bibnamefont{Gollub}} \bibnamefont{and}
\bibinfo{author}{\bibfnamefont{J.~S.} \bibnamefont{Langer}},
\bibinfo{journal}{Rev. Mod. Phys.} \textbf{\bibinfo{volume}{71}},
\bibinfo{pages}{S396} (\bibinfo{year}{1999}).
\bibitem[{\citenamefont{Aref and Gollub}(1996)}]{Aref96}
\bibinfo{author}{\bibfnamefont{H.}~\bibnamefont{Aref}} \bibnamefont{and}
\bibinfo{author}{\bibfnamefont{J.~P.} \bibnamefont{Gollub}}, in
\emph{\bibinfo{booktitle}{Research Trends in Fluid Dynamics, Report From the
United States National Committee on Theoretical and Applied Mechanics}},
edited by \bibinfo{editor}{\bibfnamefont{J.~L.} \bibnamefont{Lumley}}
(\bibinfo{publisher}{American Institute of Physics},
\bibinfo{address}{Woodbury, NY}, \bibinfo{year}{1996}),
p.~\bibinfo{pages}{15}.
\bibitem[{\citenamefont{Wolfram}(1986)}]{Wolfram86}
\bibinfo{author}{\bibfnamefont{S.}~\bibnamefont{Wolfram}}, \bibinfo{journal}{J.
Stat. Phys.} \textbf{\bibinfo{volume}{45}}, \bibinfo{pages}{471}
(\bibinfo{year}{1986}).
\bibitem[{\citenamefont{Frisch et~al.}(1986)\citenamefont{Frisch, Hasslacher,
and Pomeau}}]{Frisch86}
\bibinfo{author}{\bibfnamefont{U.}~\bibnamefont{Frisch}},
\bibinfo{author}{\bibfnamefont{B.}~\bibnamefont{Hasslacher}},
\bibnamefont{and} \bibinfo{author}{\bibfnamefont{Y.}~\bibnamefont{Pomeau}},
\bibinfo{journal}{Phys. Rev. Lett.} \textbf{\bibinfo{volume}{56}},
\bibinfo{pages}{1505} (\bibinfo{year}{1986}).
\bibitem[{\citenamefont{Brandst\"ater et~al.}(1983)\citenamefont{Brandst\"ater,
Swift, Swinney, Wolf, Farmer, Jen, and Crutchfield}}]{Brandstater83}
\bibinfo{author}{\bibfnamefont{A.}~\bibnamefont{Brandst\"ater}},
\bibinfo{author}{\bibfnamefont{J.}~\bibnamefont{Swift}},
\bibinfo{author}{\bibfnamefont{H.~L.} \bibnamefont{Swinney}},
\bibinfo{author}{\bibfnamefont{A.}~\bibnamefont{Wolf}},
\bibinfo{author}{\bibfnamefont{J.~D.} \bibnamefont{Farmer}},
\bibinfo{author}{\bibfnamefont{E.}~\bibnamefont{Jen}}, \bibnamefont{and}
\bibinfo{author}{\bibfnamefont{J.~P.} \bibnamefont{Crutchfield}},
\bibinfo{journal}{Phys. Rev. Lett.} \textbf{\bibinfo{volume}{51}},
\bibinfo{pages}{1442} (\bibinfo{year}{1983}).
\bibitem[{\citenamefont{Holmes et~al.}(1996)\citenamefont{Holmes, Lumley, and
Berkooz}}]{Holmes96}
\bibinfo{author}{\bibfnamefont{P.}~\bibnamefont{Holmes}},
\bibinfo{author}{\bibfnamefont{J.~L.} \bibnamefont{Lumley}},
\bibnamefont{and} \bibinfo{author}{\bibfnamefont{G.}~\bibnamefont{Berkooz}},
\emph{\bibinfo{title}{Turbulence, Coherent Structures, Dynamical Systems, and
Symmetry}} (\bibinfo{publisher}{Cambridge University Press},
\bibinfo{address}{Cambridge, Great Britian}, \bibinfo{year}{1996}).
\bibitem[{\citenamefont{Peyrard and Daumont}(2002)}]{Peyrard02}
\bibinfo{author}{\bibfnamefont{M.}~\bibnamefont{Peyrard}} \bibnamefont{and}
\bibinfo{author}{\bibfnamefont{I.}~\bibnamefont{Daumont}},
\bibinfo{journal}{Europhys. Lett.} \textbf{\bibinfo{volume}{59}},
\bibinfo{pages}{834} (\bibinfo{year}{2002}).
\bibitem[{\citenamefont{Sagdeev et~al.}(1988)\citenamefont{Sagdeev, Usikov, and
Zaslavsky}}]{Sagdeev88}
\bibinfo{author}{\bibfnamefont{R.~Z.} \bibnamefont{Sagdeev}},
\bibinfo{author}{\bibfnamefont{D.~A.} \bibnamefont{Usikov}},
\bibnamefont{and} \bibinfo{author}{\bibfnamefont{G.~M.}
\bibnamefont{Zaslavsky}}, \emph{\bibinfo{title}{Nonlinear Physics: From the
Pendulum to Turbulence and Chaos}} (\bibinfo{publisher}{Harwood Academic
Publishers}, \bibinfo{address}{Chur, Switzerland}, \bibinfo{year}{1988}).
\bibitem[{\citenamefont{Braun and Kivshar}(1998)}]{Braun98}
\bibinfo{author}{\bibfnamefont{O.~M.} \bibnamefont{Braun}} \bibnamefont{and}
\bibinfo{author}{\bibfnamefont{Y.~S.} \bibnamefont{Kivshar}},
\bibinfo{journal}{Phys. Rep.} \textbf{\bibinfo{volume}{306}},
\bibinfo{pages}{1} (\bibinfo{year}{1998}).
\bibitem[{\citenamefont{Feigenbaum}(1978)}]{Feigenbaum78}
\bibinfo{author}{\bibfnamefont{M.~J.} \bibnamefont{Feigenbaum}},
\bibinfo{journal}{J. Stat. Phys.} \textbf{\bibinfo{volume}{19}},
\bibinfo{pages}{25} (\bibinfo{year}{1978}).
\end{thebibliography}
\end{document}
%
% ****** End of file template.aps ******