Abstract
The double peeling of detachment of non-linear adhesive tapes from a flat Poly(methylmethacrylate) (PMMA) surface has been investigated from both experimental and theoretical point of view. Double peeling tests show that, as the detachment process advances, the peeling angle stabilizes on a limiting value {\theta}lim corresponding to a critical pull-off force Fc above which the tape is completely detached from the substrate. This observed behavior is in good agreement with results obtained following the new theory of multiple peeling and taking into account the hardening-softening non-linear behavior of the experimentally tested adhesive tapes and clarifies some aspects of the experimental data. In particular, the theoretical model shows that the value of the limiting peeling angle depends on the geometry of the adhesive tape as well as on the stiffness properties and on the interfacial energy {\Delta}{\gamma}. Finally, theoretical predictions confirm that solutions with a peeling angle lower than {\theta}lim are unstable.
本页仅发布可检索的书目信息与作者摘要。HTML 正文、PDF 和 LaTeX 源文件是独立阅读资源，不作为搜索引擎落地内容。打开页面后会按浏览器语言自动翻译标题与摘要，并写入缓存。